To avoid confusion, unify the driver main engine clk name "mclk" to the spec name "aclk".
Signed-off-by: James Qian Wang (Arm Technology China) <[email protected]> --- .../arm/display/komeda/d71/d71_component.c | 10 +++--- .../gpu/drm/arm/display/komeda/komeda_crtc.c | 34 +++++++++---------- .../gpu/drm/arm/display/komeda/komeda_dev.c | 18 +++++----- .../gpu/drm/arm/display/komeda/komeda_dev.h | 4 +-- .../gpu/drm/arm/display/komeda/komeda_kms.h | 6 ++-- .../drm/arm/display/komeda/komeda_pipeline.h | 4 +-- .../display/komeda/komeda_pipeline_state.c | 4 +-- 7 files changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c index 769f5a2da030..87248babca1f 100644 --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c @@ -902,7 +902,7 @@ static int d71_merger_init(struct d71_dev *d71, static int d71_downscaling_clk_check(struct komeda_pipeline *pipe, struct drm_display_mode *mode, - unsigned long mclk_rate, + unsigned long aclk_rate, struct komeda_data_flow_cfg *dflow) { u32 h_in = dflow->in_w; @@ -912,20 +912,20 @@ static int d71_downscaling_clk_check(struct komeda_pipeline *pipe, /* D71 downscaling must satisfy the following equation * - * MCLK h_in * v_in + * ACLK h_in * v_in * ------- >= --------------------------------------------- * PXLCLK (h_total - (1 + 2 * v_in / v_out)) * v_out * * In only horizontal downscaling situation, the right side should be * multiplied by (h_total - 3) / (h_active - 3), then equation becomes * - * MCLK h_in + * ACLK h_in * ------- >= ---------------- * PXLCLK (h_active - 3) * * To avoid precision lost the equation 1 will be convert to: * - * MCLK h_in * v_in + * ACLK h_in * v_in * ------- >= ----------------------------------- * PXLCLK (h_total -1 ) * v_out - 2 * v_in */ @@ -937,7 +937,7 @@ static int d71_downscaling_clk_check(struct komeda_pipeline *pipe, denominator = (mode->htotal - 1) * v_out - 2 * v_in; } - return mclk_rate * denominator >= mode->clock * 1000 * fraction ? + return aclk_rate * denominator >= mode->clock * 1000 * fraction ? 0 : -EINVAL; } diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c index 3933f4377cc1..66c5e0d2925c 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c @@ -20,7 +20,7 @@ static void komeda_crtc_update_clock_ratio(struct komeda_crtc_state *kcrtc_st) { - u64 pxlclk, mclk; + u64 pxlclk, aclk; if (!kcrtc_st->base.active) { kcrtc_st->clock_ratio = 0; @@ -28,10 +28,10 @@ static void komeda_crtc_update_clock_ratio(struct komeda_crtc_state *kcrtc_st) } pxlclk = kcrtc_st->base.adjusted_mode.clock * 1000; - mclk = komeda_calc_mclk(kcrtc_st) << 32; + aclk = komeda_calc_aclk(kcrtc_st) << 32; - do_div(mclk, pxlclk); - kcrtc_st->clock_ratio = mclk; + do_div(aclk, pxlclk); + kcrtc_st->clock_ratio = aclk; } /** @@ -75,12 +75,12 @@ komeda_crtc_atomic_check(struct drm_crtc *crtc, return 0; } -unsigned long komeda_calc_mclk(struct komeda_crtc_state *kcrtc_st) +unsigned long komeda_calc_aclk(struct komeda_crtc_state *kcrtc_st) { struct komeda_dev *mdev = kcrtc_st->base.crtc->dev->dev_private; unsigned long pxlclk = kcrtc_st->base.adjusted_mode.clock; - return clk_round_rate(mdev->mclk, pxlclk * 1000); + return clk_round_rate(mdev->aclk, pxlclk * 1000); } /* For active a crtc, mainly need two parts of preparation @@ -113,18 +113,18 @@ komeda_crtc_prepare(struct komeda_crtc *kcrtc) } mdev->dpmode = new_mode; - /* Only need to enable mclk on single display mode, but no need to - * enable mclk it on dual display mode, since the dual mode always - * switch from single display mode, the mclk already enabled, no need + /* Only need to enable aclk on single display mode, but no need to + * enable aclk it on dual display mode, since the dual mode always + * switch from single display mode, the aclk already enabled, no need * to enable it again. */ if (new_mode != KOMEDA_MODE_DUAL_DISP) { - err = clk_set_rate(mdev->mclk, komeda_calc_mclk(kcrtc_st)); + err = clk_set_rate(mdev->aclk, komeda_calc_aclk(kcrtc_st)); if (err) - DRM_ERROR("failed to set mclk.\n"); - err = clk_prepare_enable(mdev->mclk); + DRM_ERROR("failed to set aclk.\n"); + err = clk_prepare_enable(mdev->aclk); if (err) - DRM_ERROR("failed to enable mclk.\n"); + DRM_ERROR("failed to enable aclk.\n"); } err = clk_set_rate(master->pxlclk, pxlclk_rate); @@ -168,7 +168,7 @@ komeda_crtc_unprepare(struct komeda_crtc *kcrtc) clk_disable_unprepare(master->pxlclk); if (new_mode == KOMEDA_MODE_INACTIVE) - clk_disable_unprepare(mdev->mclk); + clk_disable_unprepare(mdev->aclk); unlock: mutex_unlock(&mdev->lock); @@ -354,7 +354,6 @@ komeda_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *m) if (m->flags & DRM_MODE_FLAG_INTERLACE) return MODE_NO_INTERLACE; - /* main clock/AXI clk must be faster than pxlclk*/ mode_clk = m->clock * 1000; pxlclk = clk_round_rate(master->pxlclk, mode_clk); if (pxlclk != mode_clk) { @@ -363,8 +362,9 @@ komeda_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *m) return MODE_NOCLOCK; } - if (clk_round_rate(mdev->mclk, mode_clk) < pxlclk) { - DRM_DEBUG_ATOMIC("mclk can't satisfy the requirement of %s-clk: %ld.\n", + /* main engine clock must be faster than pxlclk*/ + if (clk_round_rate(mdev->aclk, mode_clk) < pxlclk) { + DRM_DEBUG_ATOMIC("engine clk can't satisfy the requirement of %s-clk: %ld.\n", m->name, pxlclk); return MODE_CLOCK_HIGH; diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c index f8f6edbf6f0d..405c64dce355 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c @@ -192,15 +192,15 @@ struct komeda_dev *komeda_dev_create(struct device *dev) goto err_cleanup; } - mdev->mclk = devm_clk_get(dev, "mclk"); - if (IS_ERR(mdev->mclk)) { + mdev->aclk = devm_clk_get(dev, "aclk"); + if (IS_ERR(mdev->aclk)) { DRM_ERROR("Get engine clk failed.\n"); - err = PTR_ERR(mdev->mclk); - mdev->mclk = NULL; + err = PTR_ERR(mdev->aclk); + mdev->aclk = NULL; goto err_cleanup; } - clk_prepare_enable(mdev->mclk); + clk_prepare_enable(mdev->aclk); mdev->funcs = product->identify(mdev->reg_base, &mdev->chip); if (!komeda_product_match(mdev, product->product_id)) { @@ -300,10 +300,10 @@ void komeda_dev_destroy(struct komeda_dev *mdev) mdev->reg_base = NULL; } - if (mdev->mclk) { - clk_disable_unprepare(mdev->mclk); - devm_clk_put(dev, mdev->mclk); - mdev->mclk = NULL; + if (mdev->aclk) { + clk_disable_unprepare(mdev->aclk); + devm_clk_put(dev, mdev->aclk); + mdev->aclk = NULL; } devm_kfree(dev, mdev); diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.h b/drivers/gpu/drm/arm/display/komeda/komeda_dev.h index 5feaed2dc93f..d1c86b6174c8 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.h +++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.h @@ -160,8 +160,8 @@ struct komeda_dev { struct komeda_chip_info chip; /** @fmt_tbl: initialized by &komeda_dev_funcs->init_format_table */ struct komeda_format_caps_table fmt_tbl; - /** @mclk: HW main engine clk */ - struct clk *mclk; + /** @aclk: HW main engine clk */ + struct clk *aclk; /** @irq: irq number */ int irq; diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h index e7fa00e079a7..219fa3f0c336 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h @@ -95,7 +95,7 @@ struct komeda_crtc { /** @disable_done: this flip_done is for tracing the disable */ struct completion *disable_done; - /** @clock_ratio_property: property for ratio of (mclk << 32)/pxlclk */ + /** @clock_ratio_property: property for ratio of (aclk << 32)/pxlclk */ struct drm_property *clock_ratio_property; /** @slave_planes_property: property for slaves of the planes */ @@ -123,7 +123,7 @@ struct komeda_crtc_state { */ u32 active_pipes; - /** @clock_ratio: ratio of (mclk << 32)/pxlclk */ + /** @clock_ratio: ratio of (aclk << 32)/pxlclk */ u64 clock_ratio; /** @max_slave_zorder: the maximum of slave zorder */ @@ -182,7 +182,7 @@ static inline bool has_flip_h(u32 rot) return !!(rotation & DRM_MODE_REFLECT_X); } -unsigned long komeda_calc_mclk(struct komeda_crtc_state *kcrtc_st); +unsigned long komeda_calc_aclk(struct komeda_crtc_state *kcrtc_st); int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev); diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h index 090a5d92d5f1..7af3e266bdff 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h @@ -364,12 +364,12 @@ struct komeda_data_flow_cfg { }; struct komeda_pipeline_funcs { - /* check if the mclk (main engine clock) can satisfy the clock + /* check if the aclk (main engine clock) can satisfy the clock * requirements of the downscaling that specified by dflow */ int (*downscaling_clk_check)(struct komeda_pipeline *pipe, struct drm_display_mode *mode, - unsigned long mclk_rate, + unsigned long aclk_rate, struct komeda_data_flow_cfg *dflow); /* dump_register: Optional, dump registers to seq_file */ void (*dump_register)(struct komeda_pipeline *pipe, diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c index 44a51d84e602..257f0aedd11d 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c @@ -473,9 +473,9 @@ komeda_scaler_check_cfg(struct komeda_scaler *scaler, err = pipe->funcs->downscaling_clk_check(pipe, &kcrtc_st->base.adjusted_mode, - komeda_calc_mclk(kcrtc_st), dflow); + komeda_calc_aclk(kcrtc_st), dflow); if (err) { - DRM_DEBUG_ATOMIC("mclk can't satisfy the clock requirement of the downscaling\n"); + DRM_DEBUG_ATOMIC("aclk can't satisfy the clock requirement of the downscaling\n"); return err; } } -- 2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
