---
drivers/gpu/drm/i915/icl_dsi.c | 108 ++++++++++
drivers/gpu/drm/i915/intel_dsi.h | 1 +
drivers/gpu/drm/i915/intel_dsi_vbt.c | 282 +--------------------------
drivers/gpu/drm/i915/vlv_dsi.c | 170 ++++++++++++++++
4 files changed, 280 insertions(+), 281 deletions(-)
diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 9d962ea1e635..511c76e788ef 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -1363,6 +1363,113 @@ static const struct mipi_dsi_host_ops
gen11_dsi_host_ops = {
.transfer = gen11_dsi_host_transfer,
};
+#define ICL_PREPARE_CNT_MAX 0x7
+#define ICL_CLK_ZERO_CNT_MAX 0xf
+#define ICL_TRAIL_CNT_MAX 0x7
+#define ICL_TCLK_PRE_CNT_MAX 0x3
+#define ICL_TCLK_POST_CNT_MAX 0x7
+#define ICL_HS_ZERO_CNT_MAX 0xf
+#define ICL_EXIT_ZERO_CNT_MAX 0x7
+
+static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+ u32 tlpx_ns;
+ u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+ u32 ths_prepare_ns, tclk_trail_ns;
+ u32 hs_zero_cnt;
+ u32 tclk_pre_cnt, tclk_post_cnt;
+
+ tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+ tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+ ths_prepare_ns = max(mipi_config->ths_prepare,
+ mipi_config->tclk_prepare);
+
+ /*
+ * prepare cnt in escape clocks
+ * this field represents a hexadecimal value with a precision
+ * of 1.2 – i.e. the most significant bit is the integer
+ * and the least significant 2 bits are fraction bits.
+ * so, the field can represent a range of 0.25 to 1.75
+ */
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
+ if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
+ DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
+ prepare_cnt = ICL_PREPARE_CNT_MAX;
+ }
+
+ /* clk zero count in escape clocks */
+ clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
+ ths_prepare_ns, tlpx_ns);
+ if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
+ clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
+ }
+
+ /* trail cnt in escape clocks*/
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
+ if (trail_cnt > ICL_TRAIL_CNT_MAX) {
+ DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
+ trail_cnt = ICL_TRAIL_CNT_MAX;
+ }
+
+ /* tclk pre count in escape clocks */
+ tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
+ if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
+ DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
+ tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
+ }
+
+ /* tclk post count in escape clocks */
+ tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
+ if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
+ DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n",
tclk_post_cnt);
+ tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
+ }
+
+ /* hs zero cnt in escape clocks */
+ hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
+ ths_prepare_ns, tlpx_ns);
+ if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
+ hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
+ }
+
+ /* hs exit zero cnt in escape clocks */
+ exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
+ if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n",
exit_zero_cnt);
+ exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
+ }
+
+ /* clock lane dphy timings */
+ intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
+ CLK_PREPARE(prepare_cnt) |
+ CLK_ZERO_OVERRIDE |
+ CLK_ZERO(clk_zero_cnt) |
+ CLK_PRE_OVERRIDE |
+ CLK_PRE(tclk_pre_cnt) |
+ CLK_POST_OVERRIDE |
+ CLK_POST(tclk_post_cnt) |
+ CLK_TRAIL_OVERRIDE |
+ CLK_TRAIL(trail_cnt));
+
+ /* data lanes dphy timings */
+ intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
+ HS_PREPARE(prepare_cnt) |
+ HS_ZERO_OVERRIDE |
+ HS_ZERO(hs_zero_cnt) |
+ HS_TRAIL_OVERRIDE |
+ HS_TRAIL(trail_cnt) |
+ HS_EXIT_OVERRIDE |
+ HS_EXIT(exit_zero_cnt));
+
+ intel_dsi_log_params(intel_dsi);
+}
+
void icl_dsi_init(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
@@ -1455,6 +1562,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ icl_dphy_param_init(intel_dsi);
return;
err:
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 705a609050c0..2e997187fed5 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -192,5 +192,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16
panel_id);
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id);
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
+void intel_dsi_log_params(struct intel_dsi *intel_dsi);
#endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c
b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 3a187ffabfbd..26fcb3344ebb 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -41,13 +41,6 @@
#define MIPI_VIRTUAL_CHANNEL_SHIFT 1
#define MIPI_PORT_SHIFT 3
-#define PREPARE_CNT_MAX 0x3F
-#define EXIT_ZERO_CNT_MAX 0x3F
-#define CLK_ZERO_CNT_MAX 0xFF
-#define TRAIL_CNT_MAX 0x1F
-
-#define NS_KHZ_RATIO 1000000
-
/* base offsets for gpio pads */
#define VLV_GPIO_NC_0_HV_DDI0_HPD 0x4130
#define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120
@@ -532,7 +525,7 @@ void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
msleep(msec);
}
-static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
+void intel_dsi_log_params(struct intel_dsi *intel_dsi)
{
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
@@ -570,274 +563,6 @@ static void intel_dsi_log_params(struct intel_dsi
*intel_dsi)
enableddisabled(!(intel_dsi->video_frmt_cfg_bits &
DISABLE_VIDEO_BTA)));
}
-#define ICL_PREPARE_CNT_MAX 0x7
-#define ICL_CLK_ZERO_CNT_MAX 0xf
-#define ICL_TRAIL_CNT_MAX 0x7
-#define ICL_TCLK_PRE_CNT_MAX 0x3
-#define ICL_TCLK_POST_CNT_MAX 0x7
-#define ICL_HS_ZERO_CNT_MAX 0xf
-#define ICL_EXIT_ZERO_CNT_MAX 0x7
-
-static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
-{
- struct drm_device *dev = intel_dsi->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
- u32 tlpx_ns;
- u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
- u32 ths_prepare_ns, tclk_trail_ns;
- u32 hs_zero_cnt;
- u32 tclk_pre_cnt, tclk_post_cnt;
-
- tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
-
- tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
- ths_prepare_ns = max(mipi_config->ths_prepare,
- mipi_config->tclk_prepare);
-
- /*
- * prepare cnt in escape clocks
- * this field represents a hexadecimal value with a precision
- * of 1.2 – i.e. the most significant bit is the integer
- * and the least significant 2 bits are fraction bits.
- * so, the field can represent a range of 0.25 to 1.75
- */
- prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
- if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
- DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
- prepare_cnt = ICL_PREPARE_CNT_MAX;
- }
-
- /* clk zero count in escape clocks */
- clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
- ths_prepare_ns, tlpx_ns);
- if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
- DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
- clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
- }
-
- /* trail cnt in escape clocks*/
- trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
- if (trail_cnt > ICL_TRAIL_CNT_MAX) {
- DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
- trail_cnt = ICL_TRAIL_CNT_MAX;
- }
-
- /* tclk pre count in escape clocks */
- tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
- if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
- DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
- tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
- }
-
- /* tclk post count in escape clocks */
- tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
- if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
- DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n",
tclk_post_cnt);
- tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
- }
-
- /* hs zero cnt in escape clocks */
- hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
- ths_prepare_ns, tlpx_ns);
- if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
- DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
- hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
- }
-
- /* hs exit zero cnt in escape clocks */
- exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
- if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
- DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n",
exit_zero_cnt);
- exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
- }
-
- /* clock lane dphy timings */
- intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
- CLK_PREPARE(prepare_cnt) |
- CLK_ZERO_OVERRIDE |
- CLK_ZERO(clk_zero_cnt) |
- CLK_PRE_OVERRIDE |
- CLK_PRE(tclk_pre_cnt) |
- CLK_POST_OVERRIDE |
- CLK_POST(tclk_post_cnt) |
- CLK_TRAIL_OVERRIDE |
- CLK_TRAIL(trail_cnt));
-
- /* data lanes dphy timings */
- intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
- HS_PREPARE(prepare_cnt) |
- HS_ZERO_OVERRIDE |
- HS_ZERO(hs_zero_cnt) |
- HS_TRAIL_OVERRIDE |
- HS_TRAIL(trail_cnt) |
- HS_EXIT_OVERRIDE |
- HS_EXIT(exit_zero_cnt));
-
- intel_dsi_log_params(intel_dsi);
-}
-
-static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
-{
- struct drm_device *dev = intel_dsi->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
- u32 tlpx_ns, extra_byte_count, tlpx_ui;
- u32 ui_num, ui_den;
- u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
- u32 ths_prepare_ns, tclk_trail_ns;
- u32 tclk_prepare_clkzero, ths_prepare_hszero;
- u32 lp_to_hs_switch, hs_to_lp_switch;
- u32 mul;
-
- tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
-
- switch (intel_dsi->lane_count) {
- case 1:
- case 2:
- extra_byte_count = 2;
- break;
- case 3:
- extra_byte_count = 4;
- break;
- case 4:
- default:
- extra_byte_count = 3;
- break;
- }
-
- /* in Kbps */
- ui_num = NS_KHZ_RATIO;
- ui_den = intel_dsi_bitrate(intel_dsi);
-
- tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
- ths_prepare_hszero = mipi_config->ths_prepare_hszero;
-
- /*
- * B060
- * LP byte clock = TLPX/ (8UI)
- */
- intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
-
- /* DDR clock period = 2 * UI
- * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
- * UI(nsec) = 10^6 / bitrate
- * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
- * DDR clock count = ns_value / DDR clock period
- *
- * For GEMINILAKE dphy_param_reg will be programmed in terms of
- * HS byte clock count for other platform in HS ddr clock count
- */
- mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
- ths_prepare_ns = max(mipi_config->ths_prepare,
- mipi_config->tclk_prepare);
-
- /* prepare count */
- prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
-
- if (prepare_cnt > PREPARE_CNT_MAX) {
- DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
- prepare_cnt = PREPARE_CNT_MAX;
- }
-
- /* exit zero count */
- exit_zero_cnt = DIV_ROUND_UP(
- (ths_prepare_hszero - ths_prepare_ns) * ui_den,
- ui_num * mul
- );
-
- /*
- * Exit zero is unified val ths_zero and ths_exit
- * minimum value for ths_exit = 110ns
- * min (exit_zero_cnt * 2) = 110/UI
- * exit_zero_cnt = 55/UI
- */
- if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
- exit_zero_cnt += 1;
-
- if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
- DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
- exit_zero_cnt = EXIT_ZERO_CNT_MAX;
- }
-
- /* clk zero count */
- clk_zero_cnt = DIV_ROUND_UP(
- (tclk_prepare_clkzero - ths_prepare_ns)
- * ui_den, ui_num * mul);
-
- if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
- DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
- clk_zero_cnt = CLK_ZERO_CNT_MAX;
- }
-
- /* trail count */
- tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
- trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
-
- if (trail_cnt > TRAIL_CNT_MAX) {
- DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
- trail_cnt = TRAIL_CNT_MAX;
- }
-
- /* B080 */
- intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
- clk_zero_cnt << 8 | prepare_cnt;
-
- /*
- * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
- * mul + 10UI + Extra Byte Count
- *
- * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
- * Extra Byte Count is calculated according to number of lanes.
- * High Low Switch Count is the Max of LP to HS and
- * HS to LP switch count
- *
- */
- tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
-
- /* B044 */
- /* FIXME:
- * The comment above does not match with the code */
- lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
- exit_zero_cnt * mul + 10, 8);
-
- hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
-
- intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
- intel_dsi->hs_to_lp_count += extra_byte_count;
-
- /* B088 */
- /* LP -> HS for clock lanes
- * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
- * extra byte count
- * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
- * 2(in UI) + extra byte count
- * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
- * 8 + extra byte count
- */
- intel_dsi->clk_lp_to_hs_count =
- DIV_ROUND_UP(
- 4 * tlpx_ui + prepare_cnt * 2 +
- clk_zero_cnt * 2,
- 8);
-
- intel_dsi->clk_lp_to_hs_count += extra_byte_count;
-
- /* HS->LP for Clock Lanes
- * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
- * Extra byte count
- * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
- * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
- * Extra byte count
- */
- intel_dsi->clk_hs_to_lp_count =
- DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
- 8);
- intel_dsi->clk_hs_to_lp_count += extra_byte_count;
-
- intel_dsi_log_params(intel_dsi);
-}
-
bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
{
struct drm_device *dev = intel_dsi->base.base.dev;
@@ -925,11 +650,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16
panel_id)
intel_dsi->burst_mode_ratio = burst_mode_ratio;
- if (INTEL_GEN(dev_priv) >= 11)
- icl_dphy_param_init(intel_dsi);
- else
- vlv_dphy_param_init(intel_dsi);
-
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index 255996a71b91..59500c838b9d 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1689,6 +1689,174 @@ static void intel_dsi_add_properties(struct
intel_connector *connector)
}
}
+#define NS_KHZ_RATIO 1000000
+
+#define PREPARE_CNT_MAX 0x3F
+#define EXIT_ZERO_CNT_MAX 0x3F
+#define CLK_ZERO_CNT_MAX 0xFF
+#define TRAIL_CNT_MAX 0x1F
+
+static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+ u32 tlpx_ns, extra_byte_count, tlpx_ui;
+ u32 ui_num, ui_den;
+ u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+ u32 ths_prepare_ns, tclk_trail_ns;
+ u32 tclk_prepare_clkzero, ths_prepare_hszero;
+ u32 lp_to_hs_switch, hs_to_lp_switch;
+ u32 mul;
+
+ tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+ switch (intel_dsi->lane_count) {
+ case 1:
+ case 2:
+ extra_byte_count = 2;
+ break;
+ case 3:
+ extra_byte_count = 4;
+ break;
+ case 4:
+ default:
+ extra_byte_count = 3;
+ break;
+ }
+
+ /* in Kbps */
+ ui_num = NS_KHZ_RATIO;
+ ui_den = intel_dsi_bitrate(intel_dsi);
+
+ tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
+ ths_prepare_hszero = mipi_config->ths_prepare_hszero;
+
+ /*
+ * B060
+ * LP byte clock = TLPX/ (8UI)
+ */
+ intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
+
+ /* DDR clock period = 2 * UI
+ * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
+ * UI(nsec) = 10^6 / bitrate
+ * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
+ * DDR clock count = ns_value / DDR clock period
+ *
+ * For GEMINILAKE dphy_param_reg will be programmed in terms of
+ * HS byte clock count for other platform in HS ddr clock count
+ */
+ mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
+ ths_prepare_ns = max(mipi_config->ths_prepare,
+ mipi_config->tclk_prepare);
+
+ /* prepare count */
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
+
+ if (prepare_cnt > PREPARE_CNT_MAX) {
+ DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
+ prepare_cnt = PREPARE_CNT_MAX;
+ }
+
+ /* exit zero count */
+ exit_zero_cnt = DIV_ROUND_UP(
+ (ths_prepare_hszero - ths_prepare_ns) * ui_den,
+ ui_num * mul
+ );
+
+ /*
+ * Exit zero is unified val ths_zero and ths_exit
+ * minimum value for ths_exit = 110ns
+ * min (exit_zero_cnt * 2) = 110/UI
+ * exit_zero_cnt = 55/UI
+ */
+ if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
+ exit_zero_cnt += 1;
+
+ if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
+ exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+ }
+
+ /* clk zero count */
+ clk_zero_cnt = DIV_ROUND_UP(
+ (tclk_prepare_clkzero - ths_prepare_ns)
+ * ui_den, ui_num * mul);
+
+ if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
+ clk_zero_cnt = CLK_ZERO_CNT_MAX;
+ }
+
+ /* trail count */
+ tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
+
+ if (trail_cnt > TRAIL_CNT_MAX) {
+ DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
+ trail_cnt = TRAIL_CNT_MAX;
+ }
+
+ /* B080 */
+ intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
+ clk_zero_cnt << 8 | prepare_cnt;
+
+ /*
+ * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
+ * mul + 10UI + Extra Byte Count
+ *
+ * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
+ * Extra Byte Count is calculated according to number of lanes.
+ * High Low Switch Count is the Max of LP to HS and
+ * HS to LP switch count
+ *
+ */
+ tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
+
+ /* B044 */
+ /* FIXME:
+ * The comment above does not match with the code */
+ lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
+ exit_zero_cnt * mul + 10, 8);
+
+ hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
+
+ intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
+ intel_dsi->hs_to_lp_count += extra_byte_count;
+
+ /* B088 */
+ /* LP -> HS for clock lanes
+ * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
+ * extra byte count
+ * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
+ * 2(in UI) + extra byte count
+ * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
+ * 8 + extra byte count
+ */
+ intel_dsi->clk_lp_to_hs_count =
+ DIV_ROUND_UP(
+ 4 * tlpx_ui + prepare_cnt * 2 +
+ clk_zero_cnt * 2,
+ 8);
+
+ intel_dsi->clk_lp_to_hs_count += extra_byte_count;
+
+ /* HS->LP for Clock Lanes
+ * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
+ * Extra byte count
+ * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
+ * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
+ * Extra byte count
+ */
+ intel_dsi->clk_hs_to_lp_count =
+ DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
+ 8);
+ intel_dsi->clk_hs_to_lp_count += extra_byte_count;
+
+ intel_dsi_log_params(intel_dsi);
+}
+
void vlv_dsi_init(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
@@ -1778,6 +1946,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ vlv_dphy_param_init(intel_dsi);
+
/*
* In case of BYT with CRC PMIC, we need to use GPIO for
* Panel control.
--
2.21.0
