From: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
The vsp1_du_setup_lif() function is deprecated, and the users have been
removed. Remove the implementation and the associated configuration
structure.
Signed-off-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
drivers/media/platform/vsp1/vsp1_drm.c | 46 --------------------------
include/media/vsp1.h | 22 ------------
2 files changed, 68 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
b/drivers/media/platform/vsp1/vsp1_drm.c
index 900465caf1bf..3452d7a6dd89 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -815,52 +815,6 @@ int vsp1_du_atomic_disable(struct device *dev, unsigned
int pipe_index)
}
EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
-/**
- * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
- * @dev: the VSP device
- * @pipe_index: the DRM pipeline index
- * @cfg: the LIF configuration
- *
- * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
- * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink
and
- * source pads, and the LIF sink pad.
- *
- * The @pipe_index argument selects which DRM pipeline to setup. The number of
- * available pipelines depend on the VSP instance.
- *
- * As the media bus code on the blend unit source pad is conditioned by the
- * configuration of its sink 0 pad, we also set up the formats on all blend
unit
- * sinks, even if the configuration will be overwritten later by
- * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set
to
- * a well defined state.
- *
- * Return 0 on success or a negative error code on failure.
- */
-int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
- const struct vsp1_du_lif_config *cfg)
-{
- struct vsp1_du_modeset_config modes;
- struct vsp1_du_enable_config enable;
- int ret;
-
- if (!cfg)
- return vsp1_du_atomic_disable(dev, pipe_index);
-
- modes.width = cfg->width;
- modes.height = cfg->height;
- modes.interlaced = cfg->interlaced;
-
- ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
- if (ret)
- return ret;
-
- enable.callback = cfg->callback;
- enable.callback_data = cfg->callback_data;
-
- return vsp1_du_atomic_enable(dev, pipe_index, &enable);
-}
-EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
-
/**
* vsp1_du_atomic_begin - Prepare for an atomic update
* @dev: the VSP device
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 56643f97d4c9..b8eadd62fd15 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -20,28 +20,6 @@ int vsp1_du_init(struct device *dev);
#define VSP1_DU_STATUS_COMPLETE BIT(0)
#define VSP1_DU_STATUS_WRITEBACK BIT(1)
-/**
- * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
- * @width: output frame width
- * @height: output frame height
- * @interlaced: true for interlaced pipelines
- * @callback: frame completion callback function (optional). When a callback
- * is provided, the VSP driver guarantees that it will be called once
- * and only once for each vsp1_du_atomic_flush() call.
- * @callback_data: data to be passed to the frame completion callback
- */
-struct vsp1_du_lif_config {
- unsigned int width;
- unsigned int height;
- bool interlaced;
-
- void (*callback)(void *data, unsigned int status, u32 crc);
- void *callback_data;
-};
-
-int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
- const struct vsp1_du_lif_config *cfg);
-
/**
* struct vsp1_du_modeset_config - VSP display mode configuration
* @width: output frame width
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
