From: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
The CRTC mode setting and routing configuration are performed at the
earliest of atomic enable and atomic begin, to ensure that a valid
configuration is applied to the hardware before the CRTC gets enabled
and before planes are setup (the latter being required in particular by
the VSP). This requires the rcar_du_crtc structure to track the CRTC
enabled state.
Simplify the code and remove the manual state tracking by moving CRTC
setup to a new rcar_du_crtc_atomic_modeset() function, called directly
from the commit tail handler. The function iterates over all CRTCs in
the state transaction and performs CRTC mode setting, routing
configuration and VSP configuration.
drm_crtc_vblank_on() has to be called from the atomic begin handler, to
ensure that vertical blanking reporting is enabled before the call to
drm_crtc_vblank_get() in the atomic flush handler. As the
drm_crtc_vblank_on() and drm_crtc_vblank_off() calls don't need to be
balanced this is not an issue. A balanced alternative would have been to
call drm_crtc_vblank_on() and drm_crtc_vblank_off() from the CRTC exit
and enter standby handlers respectively, but
drm_atomic_helper_commit_modeset_disables() complains if
drm_crtc_vblank_off() hasn't been called by the atomic disable handler.
As a result, the vsp1_du_atomic_flush() operation can be called with the
DRM pipeline disabled. Correct operation has been ensured by "media:
vsp1: drm: Don't configure hardware when the pipeline is disabled".
Signed-off-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
---
Changes since v2:
- Deconstruct rcar_du_crtc_setup() completely
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 89 +++++++++++---------------
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 +-
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 1 +
3 files changed, 42 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 23f4bdef0e3a..d11a474f6f72 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -478,22 +478,6 @@ static void rcar_du_crtc_wait_page_flip(struct
rcar_du_crtc *rcrtc)
* Start/Stop and Suspend/Resume
*/
-static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
-{
- /* Configure display timings and output routing */
- rcar_du_crtc_set_display_timing(rcrtc);
- rcar_du_group_set_routing(rcrtc->group);
-
- /* Enable the VSP compositor. */
- if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) {
- rcar_du_vsp_modeset(rcrtc);
- rcar_du_vsp_enable(rcrtc);
- }
-
- /* Turn vertical blanking interrupt reporting on. */
- drm_crtc_vblank_on(&rcrtc->crtc);
-}
-
static int rcar_du_crtc_exit_standby(struct rcar_du_crtc *rcrtc)
{
int ret;
@@ -534,24 +518,6 @@ static void rcar_du_crtc_enter_standby(struct rcar_du_crtc
*rcrtc)
clk_disable_unprepare(rcrtc->clock);
}
-static void rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
-{
- /*
- * Guard against double-get, as the function is called from both the
- * .atomic_enable() and .atomic_begin() handlers.
- */
- if (rcrtc->initialized)
- return;
-
- rcar_du_crtc_setup(rcrtc);
- rcrtc->initialized = true;
-}
-
-static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
-{
- rcrtc->initialized = false;
-}
-
static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
{
bool interlaced;
@@ -716,6 +682,40 @@ int rcar_du_crtc_atomic_enter_standby(struct drm_device
*dev,
return 0;
}
+/*
+ * Configure the mode for all CRTCs that require it. For now we only handle
mode
+ * set on the VSP, CRTC configuration will be handled later.
+ */
+int rcar_du_crtc_atomic_modeset(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ unsigned int i;
+
+ for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+ struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
+
+ /*
+ * Skip commits that don't change the mode. We manually skip
+ * inactive CRTCs as disabling a CRTC is considered as a mode
+ * set by drm_atomic_crtc_needs_modeset().
+ */
+ if (!drm_atomic_crtc_needs_modeset(crtc_state) ||
+ !crtc_state->active)
+ continue;
+
+ /* Configure display timings and output routing. */
+ rcar_du_crtc_set_display_timing(rcrtc);
+ rcar_du_group_set_routing(rcrtc->group);
+
+ if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
+ rcar_du_vsp_modeset(rcrtc);
+ }
+
+ return 0;
+}
+
static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
@@ -723,8 +723,6 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc
*crtc,
struct rcar_du_crtc_state *rstate = to_rcar_crtc_state(crtc->state);
struct rcar_du_device *rcdu = rcrtc->dev;
- rcar_du_crtc_get(rcrtc);
-
/*
* On D3/E3 the dot clock is provided by the LVDS encoder attached to
* the DU channel. We need to enable its clock output explicitly if
@@ -741,6 +739,9 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc
*crtc,
mode->clock * 1000);
}
+ if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
+ rcar_du_vsp_enable(rcrtc);
+
rcar_du_crtc_start(rcrtc);
}
@@ -752,7 +753,6 @@ static void rcar_du_crtc_atomic_disable(struct drm_crtc
*crtc,
struct rcar_du_device *rcdu = rcrtc->dev;
rcar_du_crtc_stop(rcrtc);
- rcar_du_crtc_put(rcrtc);
if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index) &&
rstate->outputs == BIT(RCAR_DU_OUTPUT_DPAD0)) {
@@ -781,19 +781,8 @@ static void rcar_du_crtc_atomic_begin(struct drm_crtc
*crtc,
WARN_ON(!crtc->state->enable);
- /*
- * If a mode set is in progress we can be called with the CRTC disabled.
- * We thus need to first get and setup the CRTC in order to configure
- * planes. We must *not* put the CRTC in .atomic_flush(), as it must be
- * kept awake until the .atomic_enable() call that will follow. The get
- * operation in .atomic_enable() will in that case be a no-op, and the
- * CRTC will be put later in .atomic_disable().
- *
- * If a mode set is not in progress the CRTC is enabled, and the
- * following get call will be a no-op. There is thus no need to balance
- * it in .atomic_flush() either.
- */
- rcar_du_crtc_get(rcrtc);
+ /* Turn vertical blanking interrupt reporting on. */
+ drm_crtc_vblank_on(&rcrtc->crtc);
if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
rcar_du_vsp_atomic_begin(rcrtc);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 3ce7610793b2..61d79aa7c8e8 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -30,7 +30,6 @@ struct rcar_du_vsp;
* @extclock: external pixel dot clock (optional)
* @mmio_offset: offset of the CRTC registers in the DU MMIO block
* @index: CRTC hardware index
- * @initialized: whether the CRTC has been initialized and clocks enabled
* @dsysr: cached value of the DSYSR register
* @vblank_enable: whether vblank events are enabled on this CRTC
* @event: event to post when the pending page flip completes
@@ -51,7 +50,6 @@ struct rcar_du_crtc {
struct clk *extclock;
unsigned int mmio_offset;
unsigned int index;
- bool initialized;
u32 dsysr;
@@ -111,6 +109,8 @@ int rcar_du_crtc_atomic_exit_standby(struct drm_device *dev,
struct drm_atomic_state *state);
int rcar_du_crtc_atomic_enter_standby(struct drm_device *dev,
struct drm_atomic_state *state);
+int rcar_du_crtc_atomic_modeset(struct drm_device *dev,
+ struct drm_atomic_state *state);
void rcar_du_crtc_dsysr_clr_set(struct rcar_du_crtc *rcrtc, u32 clr, u32 set);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 59680de271cc..144c0c1b1591 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -412,6 +412,7 @@ static void rcar_du_atomic_commit_tail(struct
drm_atomic_state *old_state)
rcar_du_crtc_atomic_exit_standby(dev, old_state);
drm_atomic_helper_commit_modeset_disables(dev, old_state);
+ rcar_du_crtc_atomic_modeset(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state,
DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
--
Regards,
Laurent Pinchart
