This panel is used on the OpenMoko Neo FreeRunner and Neo 1973.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
drivers/gpu/drm/panel/Kconfig | 8 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c | 382 +++++++++++++++++++
3 files changed, 391 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index dc10f727689a..b7099d211061 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -304,6 +304,14 @@ config DRM_PANEL_SONY_ACX565AKM
Say Y here if you want to enable support for the Sony ACX565AKM
800x600 3.5" panel.
+config DRM_PANEL_TPO_TD028TTEC1
+ tristate "TPO TD028TTEC1 panel driver"
+ depends on OF && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for TPO TD028TTEC1 480x640
+ 2.8" panel.
+
config DRM_PANEL_TPO_TPG110
tristate "TPO TPG 800x400 panel"
depends on OF && SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 84cbc069f6cd..a1d4de64c0b1 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -32,5 +32,6 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) +=
panel-sharp-ls043t1le01.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
diff --git a/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
new file mode 100644
index 000000000000..05af9ea6339c
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-tpo-td028ttec1.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Toppoly TD028TTEC1 Panel Driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated
+ *
+ * Based on the omapdrm-specific panel-tpo-td028ttec1 driver
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkei...@ti.com>
+ *
+ * Neo 1973 code (jbt6k74.c):
+ * Copyright (C) 2006-2007 OpenMoko, Inc.
+ * Author: Harald Welte <lafo...@openmoko.org>
+ *
+ * Ported and adapted from Neo 1973 U-Boot by:
+ * H. Nikolaus Schaller <h...@goldelico.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define JBT_COMMAND 0x000
+#define JBT_DATA 0x100
+
+#define JBT_REG_SLEEP_IN 0x10
+#define JBT_REG_SLEEP_OUT 0x11
+
+#define JBT_REG_DISPLAY_OFF 0x28
+#define JBT_REG_DISPLAY_ON 0x29
+
+#define JBT_REG_RGB_FORMAT 0x3a
+#define JBT_REG_QUAD_RATE 0x3b
+
+#define JBT_REG_POWER_ON_OFF 0xb0
+#define JBT_REG_BOOSTER_OP 0xb1
+#define JBT_REG_BOOSTER_MODE 0xb2
+#define JBT_REG_BOOSTER_FREQ 0xb3
+#define JBT_REG_OPAMP_SYSCLK 0xb4
+#define JBT_REG_VSC_VOLTAGE 0xb5
+#define JBT_REG_VCOM_VOLTAGE 0xb6
+#define JBT_REG_EXT_DISPL 0xb7
+#define JBT_REG_OUTPUT_CONTROL 0xb8
+#define JBT_REG_DCCLK_DCEV 0xb9
+#define JBT_REG_DISPLAY_MODE1 0xba
+#define JBT_REG_DISPLAY_MODE2 0xbb
+#define JBT_REG_DISPLAY_MODE 0xbc
+#define JBT_REG_ASW_SLEW 0xbd
+#define JBT_REG_DUMMY_DISPLAY 0xbe
+#define JBT_REG_DRIVE_SYSTEM 0xbf
+
+#define JBT_REG_SLEEP_OUT_FR_A 0xc0
+#define JBT_REG_SLEEP_OUT_FR_B 0xc1
+#define JBT_REG_SLEEP_OUT_FR_C 0xc2
+#define JBT_REG_SLEEP_IN_LCCNT_D 0xc3
+#define JBT_REG_SLEEP_IN_LCCNT_E 0xc4
+#define JBT_REG_SLEEP_IN_LCCNT_F 0xc5
+#define JBT_REG_SLEEP_IN_LCCNT_G 0xc6
+
+#define JBT_REG_GAMMA1_FINE_1 0xc7
+#define JBT_REG_GAMMA1_FINE_2 0xc8
+#define JBT_REG_GAMMA1_INCLINATION 0xc9
+#define JBT_REG_GAMMA1_BLUE_OFFSET 0xca
+
+#define JBT_REG_BLANK_CONTROL 0xcf
+#define JBT_REG_BLANK_TH_TV 0xd0
+#define JBT_REG_CKV_ON_OFF 0xd1
+#define JBT_REG_CKV_1_2 0xd2
+#define JBT_REG_OEV_TIMING 0xd3
+#define JBT_REG_ASW_TIMING_1 0xd4
+#define JBT_REG_ASW_TIMING_2 0xd5
+
+#define JBT_REG_HCLOCK_VGA 0xec
+#define JBT_REG_HCLOCK_QVGA 0xed
+
+struct td028ttec1_device {
+ struct drm_panel panel;
+
+ struct spi_device *spi;
+ struct backlight_device *backlight;
+};
+
+#define to_td028ttec1_device(p) container_of(p, struct td028ttec1_device,
panel)
+
+static int jbt_ret_write_0(struct td028ttec1_device *lcd, u8 reg, int *err)
+{
+ struct spi_device *spi = lcd->spi;
+ u16 tx_buf = JBT_COMMAND | reg;
+ int ret;
+
+ if (err && *err)
+ return *err;
+
+ ret = spi_write(spi, (u8 *)&tx_buf, sizeof(tx_buf));
+ if (ret < 0) {
+ dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
+ if (err)
+ *err = ret;
+ }
+
+ return ret;
+}
+
+static int jbt_reg_write_1(struct td028ttec1_device *lcd,
+ u8 reg, u8 data, int *err)
+{
+ struct spi_device *spi = lcd->spi;
+ u16 tx_buf[2];
+ int ret;
+
+ if (err && *err)
+ return *err;
+
+ tx_buf[0] = JBT_COMMAND | reg;
+ tx_buf[1] = JBT_DATA | data;
+
+ ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
+ if (ret < 0) {
+ dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
+ if (err)
+ *err = ret;
+ }
+
+ return ret;
+}
+
+static int jbt_reg_write_2(struct td028ttec1_device *lcd,
+ u8 reg, u16 data, int *err)
+{
+ struct spi_device *spi = lcd->spi;
+ u16 tx_buf[3];
+ int ret;
+
+ if (err && *err)
+ return *err;
+
+ tx_buf[0] = JBT_COMMAND | reg;
+ tx_buf[1] = JBT_DATA | (data >> 8);
+ tx_buf[2] = JBT_DATA | (data & 0xff);
+
+ ret = spi_write(spi, (u8 *)tx_buf, sizeof(tx_buf));
+ if (ret < 0) {
+ dev_err(&spi->dev, "%s: SPI write failed: %d\n", __func__, ret);
+ if (err)
+ *err = ret;
+ }
+
+ return ret;
+}
+
+static int td028ttec1_disable(struct drm_panel *panel)
+{
+ struct td028ttec1_device *lcd = to_td028ttec1_device(panel);
+
+ backlight_disable(lcd->backlight);
+
+ jbt_ret_write_0(lcd, JBT_REG_DISPLAY_OFF, NULL);
+ jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0x8002, NULL);
+ jbt_ret_write_0(lcd, JBT_REG_SLEEP_IN, NULL);
+ jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x00, NULL);
+
+ return 0;
+}
+
+static int td028ttec1_enable(struct drm_panel *panel)
+{
+ struct td028ttec1_device *lcd = to_td028ttec1_device(panel);
+ unsigned int i;
+ int ret = 0;
+
+ /* Three times command zero */
+ for (i = 0; i < 3; ++i) {
+ jbt_ret_write_0(lcd, 0x00, &ret);
+ usleep_range(1000, 2000);
+ }
+
+ if (ret)
+ return ret;
+
+ /* deep standby out */
+ jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x17, &ret);
+
+ /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
+ jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE, 0x80, &ret);
+
+ /* Quad mode off */
+ jbt_reg_write_1(lcd, JBT_REG_QUAD_RATE, 0x00, &ret);
+
+ /* AVDD on, XVDD on */
+ jbt_reg_write_1(lcd, JBT_REG_POWER_ON_OFF, 0x16, &ret);
+
+ /* Output control */
+ jbt_reg_write_2(lcd, JBT_REG_OUTPUT_CONTROL, 0xfff9, &ret);
+
+ /* Sleep mode off */
+ jbt_ret_write_0(lcd, JBT_REG_SLEEP_OUT, &ret);
+
+ /* at this point we have like 50% grey */
+
+ /* initialize register set */
+ jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE1, 0x01, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_DISPLAY_MODE2, 0x00, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_RGB_FORMAT, 0x60, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_DRIVE_SYSTEM, 0x10, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_BOOSTER_OP, 0x56, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_BOOSTER_MODE, 0x33, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_BOOSTER_FREQ, 0x11, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_OPAMP_SYSCLK, 0x02, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_VSC_VOLTAGE, 0x2b, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_VCOM_VOLTAGE, 0x40, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_EXT_DISPL, 0x03, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_DCCLK_DCEV, 0x04, &ret);
+ /*
+ * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+ * to avoid red / blue flicker
+ */
+ jbt_reg_write_1(lcd, JBT_REG_ASW_SLEW, 0x04, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_DUMMY_DISPLAY, 0x00, &ret);
+
+ jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_A, 0x11, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_B, 0x11, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_SLEEP_OUT_FR_C, 0x11, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0, &ret);
+
+ jbt_reg_write_2(lcd, JBT_REG_GAMMA1_FINE_1, 0x5533, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_GAMMA1_FINE_2, 0x00, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_GAMMA1_INCLINATION, 0x00, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00, &ret);
+
+ jbt_reg_write_2(lcd, JBT_REG_HCLOCK_VGA, 0x1f0, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_BLANK_CONTROL, 0x02, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_BLANK_TH_TV, 0x0804, &ret);
+
+ jbt_reg_write_1(lcd, JBT_REG_CKV_ON_OFF, 0x01, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_CKV_1_2, 0x0000, &ret);
+
+ jbt_reg_write_2(lcd, JBT_REG_OEV_TIMING, 0x0d0e, &ret);
+ jbt_reg_write_2(lcd, JBT_REG_ASW_TIMING_1, 0x11a4, &ret);
+ jbt_reg_write_1(lcd, JBT_REG_ASW_TIMING_2, 0x0e, &ret);
+
+ jbt_ret_write_0(lcd, JBT_REG_DISPLAY_ON, &ret);
+
+ if (ret)
+ return ret;
+
+ backlight_enable(lcd->backlight);
+
+ return 0;
+}
+
+static const struct drm_display_mode td028ttec1_mode = {
+ .clock = 22153,
+ .hdisplay = 480,
+ .hsync_start = 480 + 24,
+ .hsync_end = 480 + 24 + 8,
+ .htotal = 480 + 24 + 8 + 8,
+ .vdisplay = 640,
+ .vsync_start = 640 + 4,
+ .vsync_end = 640 + 4 + 2,
+ .vtotal = 640 + 4 + 2 + 2,
+ .vrefresh = 66,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static int td028ttec1_get_modes(struct drm_panel *panel)
+{
+ struct drm_connector *connector = panel->connector;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &td028ttec1_mode);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = 43;
+ connector->display_info.height_mm = 58;
+ /*
+ * FIXME: According to the datasheet sync signals are sampled on the
+ * rising edge of the clock, but the code running on the OpenMoko Neo
+ * FreeRunner and Neo 1973 indicates sampling on the falling edge. This
+ * should be tested on a real device.
+ */
+ connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs td028ttec1_funcs = {
+ .disable = td028ttec1_disable,
+ .enable = td028ttec1_enable,
+ .get_modes = td028ttec1_get_modes,
+};
+
+static int td028ttec1_probe(struct spi_device *spi)
+{
+ struct td028ttec1_device *lcd;
+ int ret;
+
+ lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
+ if (lcd == NULL)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, lcd);
+ lcd->spi = spi;
+
+ lcd->backlight = devm_of_find_backlight(&spi->dev);
+ if (IS_ERR(lcd->backlight))
+ return PTR_ERR(lcd->backlight);
+
+ spi->mode = SPI_MODE_3;
+ spi->bits_per_word = 9;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
+ return ret;
+ }
+
+ drm_panel_init(&lcd->panel);
+ lcd->panel.dev = &lcd->spi->dev;
+ lcd->panel.funcs = &td028ttec1_funcs;
+
+ return drm_panel_add(&lcd->panel);
+}
+
+static int td028ttec1_remove(struct spi_device *spi)
+{
+ struct td028ttec1_device *lcd = spi_get_drvdata(spi);
+
+ drm_panel_remove(&lcd->panel);
+ td028ttec1_disable(&lcd->panel);
+
+ return 0;
+}
+
+static const struct of_device_id td028ttec1_of_match[] = {
+ { .compatible = "tpo,td028ttec1", },
+ /* DT backward compatibility. */
+ { .compatible = "toppoly,td028ttec1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
+static const struct spi_device_id td028ttec1_ids[] = {
+ { "tpo,td028ttec1", 0},
+ { "toppoly,td028ttec1", 0 },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
+
+static struct spi_driver td028ttec1_driver = {
+ .probe = td028ttec1_probe,
+ .remove = td028ttec1_remove,
+ .id_table = td028ttec1_ids,
+ .driver = {
+ .name = "panel-tpo-td028ttec1",
+ .of_match_table = td028ttec1_of_match,
+ },
+};
+
+module_spi_driver(td028ttec1_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <h...@goldelico.com>");
+MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
+MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
