On Mon, Jul 08, 2019 at 12:27:00PM +0200, Jean-Jacques Hiblot wrote: > From: Tomi Valkeinen <tomi.valkei...@ti.com> > > This patch adds a led-backlight driver (led_bl), which is similar to > pwm_bl except the driver uses a LED class driver to adjust the > brightness in the HW. Multiple LEDs can be used for a single backlight. > > Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com> > Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com> > --- > drivers/video/backlight/Kconfig | 7 + > drivers/video/backlight/Makefile | 1 + > drivers/video/backlight/led_bl.c | 235 +++++++++++++++++++++++++++++++ > 3 files changed, 243 insertions(+) > create mode 100644 drivers/video/backlight/led_bl.c
> diff --git a/drivers/video/backlight/led_bl.c > b/drivers/video/backlight/led_bl.c > new file mode 100644 > index 000000000000..7644277cfdbb > --- /dev/null > +++ b/drivers/video/backlight/led_bl.c > @@ -0,0 +1,235 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2015-2019 Texas Instruments Incorporated - > http://www.ti.com/ > + * Author: Tomi Valkeinen <tomi.valkei...@ti.com> > + * > + * Based on pwm_bl.c > + */ > + > +#include <linux/backlight.h> > +#include <linux/gpio/consumer.h> Header should no longer be needed. > +static int led_bl_probe(struct platform_device *pdev) > +{ > + struct backlight_properties props; > + struct led_bl_data *priv; > + int ret; > + int i; > + > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, priv); > + > + priv->dev = &pdev->dev; > + > + ret = led_bl_parse_dt(&pdev->dev, priv); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to parse DT data\n"); > + return ret; > + } > + priv->leds = devm_kzalloc(&pdev->dev, > + sizeof(struct led_classdev *) * priv->nb_leds, > + GFP_KERNEL); > + if (!priv->leds) > + return -ENOMEM; > + > + for (i = 0; i < priv->nb_leds; i++) { > + priv->leds[i] = devm_led_get(&pdev->dev, i); > + if (IS_ERR(priv->leds[i])) > + return PTR_ERR(priv->leds[i]); > + } > + > + memset(&props, 0, sizeof(struct backlight_properties)); > + props.type = BACKLIGHT_RAW; > + props.max_brightness = priv->max_brightness; > + priv->bl_dev = backlight_device_register(dev_name(&pdev->dev), > + &pdev->dev, priv, &led_bl_ops, &props); > + if (IS_ERR(priv->bl_dev)) { > + dev_err(&pdev->dev, "failed to register backlight\n"); > + ret = PTR_ERR(priv->bl_dev); > + goto err; goto is pointless for a pure-devm function. > + } > + > + priv->bl_dev->props.brightness = priv->default_brightness; > + backlight_update_status(priv->bl_dev); This will light up the backlight during backlight probe. Can you take a look at pwm_backlight_initial_power_state() and decide how much of it applies to an LED based backlight (the phandle stuff certainly does). Daniel. _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
