Add DT binding for led-backlight.
Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---
.../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644
Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
new file mode 100644
index 000000000000..4c7dfbe7f67a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
@@ -0,0 +1,28 @@
+led-backlight bindings
+
+This binding is used to describe a basic backlight device made of LEDs.
+It can also be used to describe a backlight device controlled by the output of
+a LED driver.
+
+Required properties:
+ - compatible: "led-backlight"
+ - leds: a list of LEDs
+
+Optional properties:
+ - brightness-levels: Array of distinct brightness levels. The levels must be
+ in the range accepted by the underlying LED devices.
+ This is used to translate a backlight brightness level
+ into a LED brightness level. If it is not provided, the
+ identity mapping is used.
+
+ - default-brightness-level: The default brightness level.
+
+Example:
+
+ backlight {
+ compatible = "led-backlight";
+
+ leds = <&led1>, <&led2>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
