This panel is handled through the generic lvds-panel bindings,
so only needs its additional compatible specified.

Some panel specific documentation can be found here:
https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm

Signed-off-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
---
 .../display/panel/advantech,idk-2121wr.txt         | 62 ++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt

diff --git 
a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt 
b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
new file mode 100644
index 0000000..70b15b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
@@ -0,0 +1,62 @@
+Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
+===============================================
+
+Required properties:
+- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
+
+This binding is compatible with the lvds-panel binding, which is specified
+in panel-lvds.txt in this directory.
+
+Example
+-------
+
+       panel {
+               compatible = "advantech,idk-2121wr", "panel-lvds";
+
+               width-mm = <476>;
+               height-mm = <268>;
+
+               data-mapping = "vesa-24";
+
+               panel-timing {
+                       clock-frequency = <148500000>;
+                       hactive = <1920>;
+                       vactive = <1080>;
+                       hsync-len = <44>;
+                       hfront-porch = <88>;
+                       hback-porch = <148>;
+                       vfront-porch = <4>;
+                       vback-porch = <36>;
+                       vsync-len = <5>;
+               };
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               lvds0_panel_in: endpoint {
+                                       remote-endpoint = <&lvds0_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               lvds1_panel_in: endpoint {
+                                       remote-endpoint = <&lvds1_out>;
+                               };
+                       };
+               };
+       };
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm5 0 50000>;
+
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <6>;
+
+               power-supply = <&reg_12p0v>;
+               enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+       };
-- 
2.7.4

Reply via email to