Hi Sam,
Thank you for the patch.
On Sun, Aug 04, 2019 at 10:16:37PM +0200, Sam Ravnborg wrote:
> Use drm_panel infrastrucute:
> - drm_panel has guards for calling disable/enable twice
As stated in the review of the corresponding patch, I think those checks
should be dropped, but not moved to the panel core.
> - drm_panel has backlight support
This answers my first question in the review of 15/16 :-)
> To use the drm_panel infrastructure use the drm_panel_*
> variants for prepare/enable/disable/unprepare.
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: Sam Ravnborg <s...@ravnborg.org>
The change looks good overall,
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
but this is pending an agreement on what to do with the multiple
prepare/enable guards.
> ---
> drivers/gpu/drm/panel/panel-simple.c | 73 +++++-----------------------
> 1 file changed, 11 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index bff7578f84dd..c7eed34f2c9c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -21,7 +21,6 @@
> * DEALINGS IN THE SOFTWARE.
> */
>
> -#include <linux/backlight.h>
> #include <linux/delay.h>
> #include <linux/gpio/consumer.h>
> #include <linux/module.h>
> @@ -98,13 +97,10 @@ struct panel_desc {
>
> struct panel_simple {
> struct drm_panel base;
> - bool prepared;
> - bool enabled;
> bool no_hpd;
>
> const struct panel_desc *desc;
>
> - struct backlight_device *backlight;
> struct regulator *supply;
> struct i2c_adapter *ddc;
>
> @@ -232,20 +228,9 @@ static int panel_simple_disable(struct drm_panel *panel)
> {
> struct panel_simple *p = to_panel_simple(panel);
>
> - if (!p->enabled)
> - return 0;
> -
> - if (p->backlight) {
> - p->backlight->props.power = FB_BLANK_POWERDOWN;
> - p->backlight->props.state |= BL_CORE_FBBLANK;
> - backlight_update_status(p->backlight);
> - }
> -
> if (p->desc->delay.disable)
> msleep(p->desc->delay.disable);
>
> - p->enabled = false;
> -
> return 0;
> }
>
> @@ -253,9 +238,6 @@ static int panel_simple_unprepare(struct drm_panel *panel)
> {
> struct panel_simple *p = to_panel_simple(panel);
>
> - if (!p->prepared)
> - return 0;
> -
> gpiod_set_value_cansleep(p->enable_gpio, 0);
>
> regulator_disable(p->supply);
> @@ -263,8 +245,6 @@ static int panel_simple_unprepare(struct drm_panel *panel)
> if (p->desc->delay.unprepare)
> msleep(p->desc->delay.unprepare);
>
> - p->prepared = false;
> -
> return 0;
> }
>
> @@ -274,9 +254,6 @@ static int panel_simple_prepare(struct drm_panel *panel)
> unsigned int delay;
> int err;
>
> - if (p->prepared)
> - return 0;
> -
> err = regulator_enable(p->supply);
> if (err < 0) {
> dev_err(panel->dev, "failed to enable supply: %d\n", err);
> @@ -291,8 +268,6 @@ static int panel_simple_prepare(struct drm_panel *panel)
> if (delay)
> msleep(delay);
>
> - p->prepared = true;
> -
> return 0;
> }
>
> @@ -300,20 +275,9 @@ static int panel_simple_enable(struct drm_panel *panel)
> {
> struct panel_simple *p = to_panel_simple(panel);
>
> - if (p->enabled)
> - return 0;
> -
> if (p->desc->delay.enable)
> msleep(p->desc->delay.enable);
>
> - if (p->backlight) {
> - p->backlight->props.state &= ~BL_CORE_FBBLANK;
> - p->backlight->props.power = FB_BLANK_UNBLANK;
> - backlight_update_status(p->backlight);
> - }
> -
> - p->enabled = true;
> -
> return 0;
> }
>
> @@ -413,7 +377,7 @@ static void panel_simple_parse_panel_timing_node(struct
> device *dev,
>
> static int panel_simple_probe(struct device *dev, const struct panel_desc
> *desc)
> {
> - struct device_node *backlight, *ddc;
> + struct device_node *ddc;
> struct panel_simple *panel;
> struct display_timing dt;
> int err;
> @@ -422,8 +386,6 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> if (!panel)
> return -ENOMEM;
>
> - panel->enabled = false;
> - panel->prepared = false;
> panel->desc = desc;
>
> panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
> @@ -441,24 +403,13 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> return err;
> }
>
> - backlight = of_parse_phandle(dev->of_node, "backlight", 0);
> - if (backlight) {
> - panel->backlight = of_find_backlight_by_node(backlight);
> - of_node_put(backlight);
> -
> - if (!panel->backlight)
> - return -EPROBE_DEFER;
> - }
> -
> ddc = of_parse_phandle(dev->of_node, "ddc-i2c-bus", 0);
> if (ddc) {
> panel->ddc = of_find_i2c_adapter_by_node(ddc);
> of_node_put(ddc);
>
> - if (!panel->ddc) {
> - err = -EPROBE_DEFER;
> - goto free_backlight;
> - }
> + if (!panel->ddc)
> + return -EPROBE_DEFER;
> }
>
> if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
> @@ -468,6 +419,10 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> panel->base.dev = dev;
> panel->base.funcs = &panel_simple_funcs;
>
> + err = drm_panel_of_backlight(&panel->base);
> + if (err)
> + goto free_ddc;
> +
> err = drm_panel_add(&panel->base);
> if (err < 0)
> goto free_ddc;
> @@ -479,9 +434,6 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
> free_ddc:
> if (panel->ddc)
> put_device(&panel->ddc->dev);
> -free_backlight:
> - if (panel->backlight)
> - put_device(&panel->backlight->dev);
This looks weird, where
>
> return err;
> }
> @@ -492,15 +444,12 @@ static int panel_simple_remove(struct device *dev)
>
> drm_panel_remove(&panel->base);
>
> - panel_simple_disable(&panel->base);
> - panel_simple_unprepare(&panel->base);
> + drm_panel_disable(&panel->base);
> + drm_panel_unprepare(&panel->base);
>
> if (panel->ddc)
> put_device(&panel->ddc->dev);
>
> - if (panel->backlight)
> - put_device(&panel->backlight->dev);
> -
> return 0;
> }
>
> @@ -508,8 +457,8 @@ static void panel_simple_shutdown(struct device *dev)
> {
> struct panel_simple *panel = dev_get_drvdata(dev);
>
> - panel_simple_disable(&panel->base);
> - panel_simple_unprepare(&panel->base);
> + drm_panel_disable(&panel->base);
> + drm_panel_unprepare(&panel->base);
> }
>
> static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
