Hi Laurent.
On Tue, Aug 13, 2019 at 04:33:09PM +0300, Laurent Pinchart wrote:
> This panel is used on the Nokia N900.
>
> The code is based on the omapdrm-specific panel-sony-acx565akm driver.
>
> Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Looking at the backlight support in this driver there is some potential
for using more of the infrastructure.
iFor example there should be no need for acx565akm_panel.mutex,
as the core handles locking.
Backlight should maybe use devm_backlight_device_register()
as part of using more infrastructure, so clean-up is automatic.
Also the implementation of the enable/disable callbacks looks like
most of the implementation belongs in prepare/unprepare callbacks.
And enable() could be as trivial as:
backlight_update_status(acx565akm_panel->backlight);
My feedback to this patch would be:
"This is how it was in the original driver so we can fix it in a
follow-up patch. Follow-up patch needs HW to test the changes."
If you add a TODO like this:
TODO:
- Update backlight support to use backlight_update_status() etc.
- Use prepare/unprepare for the basic power on/off of the backligt
(Or some other way to remember we need to do this) then:
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>
Even better would be a follow-up patch to actually do these things.
Sam
> ---
> Changes since v2:
>
> - Call drm_panel_unprepare() in .remove() handler
>
> Changes since v1:
>
> - Mention boards using the panel in Kconfig
> - Renamed acx565akm_device to acx565akm_panel
> - Comments updates
> - Store width_mm and height_mm in drm_display_mode
> - Use drm_panel_disable() in .remove() handler
> ---
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-sony-acx565akm.c | 694 +++++++++++++++++++
> 3 files changed, 703 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-sony-acx565akm.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 8d9a8cdb704e..b05649b3118a 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -316,6 +316,14 @@ config DRM_PANEL_SITRONIX_ST7789V
> Say Y here if you want to enable support for the Sitronix
> ST7789V controller for 240x320 LCD panels
>
> +config DRM_PANEL_SONY_ACX565AKM
> + tristate "Sony ACX565AKM panel"
> + depends on GPIOLIB && OF && SPI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the Sony ACX565AKM
> + 800x600 3.5" panel (found on the Nokia N900).
> +
> config DRM_PANEL_TPO_TPG110
> tristate "TPO TPG 800x400 panel"
> depends on OF && SPI && GPIOLIB
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 14d1c49ef3ab..28cf2332fd06 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -33,5 +33,6 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) +=
> panel-sharp-ls037v7dw01.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> +obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c
> b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
> new file mode 100644
> index 000000000000..c8c82163e24d
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c
> @@ -0,0 +1,694 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sony ACX565AKM LCD Panel driver
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated
> + *
> + * Based on the omapdrm-specific panel-sony-acx565akm driver
> + *
> + * Copyright (C) 2010 Nokia Corporation
> + * Author: Imre Deak <imre.d...@nokia.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/sched.h>
> +#include <linux/spi/spi.h>
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
> +#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
> +#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
> +#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
> +
> +#define MIPID_CMD_WRITE_CABC 0x55
> +#define MIPID_CMD_READ_CABC 0x56
> +
> +#define MIPID_VER_LPH8923 3
> +#define MIPID_VER_LS041Y3 4
> +#define MIPID_VER_L4F00311 8
> +#define MIPID_VER_ACX565AKM 9
> +
> +struct acx565akm_panel {
> + struct drm_panel panel;
> +
> + struct spi_device *spi;
> + struct gpio_desc *reset_gpio;
> + struct backlight_device *backlight;
> +
> + struct mutex mutex;
> +
> + const char *name;
> + u8 display_id[3];
> + int model;
> + int revision;
> + bool has_bc;
> + bool has_cabc;
> +
> + bool enabled;
> + unsigned int cabc_mode;
> + /*
> + * Next value of jiffies when we can issue the next sleep in/out
> + * command.
> + */
> + unsigned long hw_guard_end;
> + unsigned long hw_guard_wait; /* max guard time in jiffies */
> +};
> +
> +#define to_acx565akm_device(p) container_of(p, struct acx565akm_panel, panel)
> +
> +static void acx565akm_transfer(struct acx565akm_panel *lcd, int cmd,
> + const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
> +{
> + struct spi_message m;
> + struct spi_transfer *x, xfer[5];
> + int ret;
> +
> + spi_message_init(&m);
> +
> + memset(xfer, 0, sizeof(xfer));
> + x = &xfer[0];
> +
> + cmd &= 0xff;
> + x->tx_buf = &cmd;
> + x->bits_per_word = 9;
> + x->len = 2;
> +
> + if (rlen > 1 && wlen == 0) {
> + /*
> + * Between the command and the response data there is a
> + * dummy clock cycle. Add an extra bit after the command
> + * word to account for this.
> + */
> + x->bits_per_word = 10;
> + cmd <<= 1;
> + }
> + spi_message_add_tail(x, &m);
> +
> + if (wlen) {
> + x++;
> + x->tx_buf = wbuf;
> + x->len = wlen;
> + x->bits_per_word = 9;
> + spi_message_add_tail(x, &m);
> + }
> +
> + if (rlen) {
> + x++;
> + x->rx_buf = rbuf;
> + x->len = rlen;
> + spi_message_add_tail(x, &m);
> + }
> +
> + ret = spi_sync(lcd->spi, &m);
> + if (ret < 0)
> + dev_dbg(&lcd->spi->dev, "spi_sync %d\n", ret);
> +}
> +
> +static inline void acx565akm_cmd(struct acx565akm_panel *lcd, int cmd)
> +{
> + acx565akm_transfer(lcd, cmd, NULL, 0, NULL, 0);
> +}
> +
> +static inline void acx565akm_write(struct acx565akm_panel *lcd,
> + int reg, const u8 *buf, int len)
> +{
> + acx565akm_transfer(lcd, reg, buf, len, NULL, 0);
> +}
> +
> +static inline void acx565akm_read(struct acx565akm_panel *lcd,
> + int reg, u8 *buf, int len)
> +{
> + acx565akm_transfer(lcd, reg, NULL, 0, buf, len);
> +}
> +
> +/*
> -----------------------------------------------------------------------------
> + * Auto Brightness Control Via sysfs
> + */
> +
> +static unsigned int acx565akm_get_cabc_mode(struct acx565akm_panel *lcd)
> +{
> + return lcd->cabc_mode;
> +}
> +
> +static void acx565akm_set_cabc_mode(struct acx565akm_panel *lcd,
> + unsigned int mode)
> +{
> + u16 cabc_ctrl;
> +
> + lcd->cabc_mode = mode;
> + if (!lcd->enabled)
> + return;
> + cabc_ctrl = 0;
> + acx565akm_read(lcd, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
> + cabc_ctrl &= ~3;
> + cabc_ctrl |= (1 << 8) | (mode & 3);
> + acx565akm_write(lcd, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
> +}
> +
> +static unsigned int acx565akm_get_hw_cabc_mode(struct acx565akm_panel *lcd)
> +{
> + u8 cabc_ctrl;
> +
> + acx565akm_read(lcd, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
> + return cabc_ctrl & 3;
> +}
> +
> +static const char * const acx565akm_cabc_modes[] = {
> + "off", /* always used when CABC is not supported */
> + "ui",
> + "still-image",
> + "moving-image",
> +};
> +
> +static ssize_t cabc_mode_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(dev);
> + const char *mode_str;
> + int mode;
> +
> + if (!lcd->has_cabc)
> + mode = 0;
> + else
> + mode = acx565akm_get_cabc_mode(lcd);
> +
> + mode_str = "unknown";
> + if (mode >= 0 && mode < ARRAY_SIZE(acx565akm_cabc_modes))
> + mode_str = acx565akm_cabc_modes[mode];
> +
> + return sprintf(buf, "%s\n", mode_str);
> +}
> +
> +static ssize_t cabc_mode_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(dev);
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) {
> + const char *mode_str = acx565akm_cabc_modes[i];
> + int cmp_len = strlen(mode_str);
> +
> + if (count > 0 && buf[count - 1] == '\n')
> + count--;
> + if (count != cmp_len)
> + continue;
> +
> + if (strncmp(buf, mode_str, cmp_len) == 0)
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(acx565akm_cabc_modes))
> + return -EINVAL;
> +
> + if (!lcd->has_cabc && i != 0)
> + return -EINVAL;
> +
> + mutex_lock(&lcd->mutex);
> + acx565akm_set_cabc_mode(lcd, i);
> + mutex_unlock(&lcd->mutex);
> +
> + return count;
> +}
> +
> +static ssize_t cabc_available_modes_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(dev);
> + unsigned int i;
> + size_t len = 0;
> +
> + if (!lcd->has_cabc)
> + return sprintf(buf, "%s\n", acx565akm_cabc_modes[0]);
> +
> + for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++)
> + len += sprintf(&buf[len], "%s%s", i ? " " : "",
> + acx565akm_cabc_modes[i]);
> +
> + buf[len++] = '\n';
> +
> + return len;
> +}
> +
> +static DEVICE_ATTR_RW(cabc_mode);
> +static DEVICE_ATTR_RO(cabc_available_modes);
> +
> +static struct attribute *acx565akm_cabc_attrs[] = {
> + &dev_attr_cabc_mode.attr,
> + &dev_attr_cabc_available_modes.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group acx565akm_cabc_attr_group = {
> + .attrs = acx565akm_cabc_attrs,
> +};
> +
> +/*
> -----------------------------------------------------------------------------
> + * Backlight Device
> + */
> +
> +static int acx565akm_get_actual_brightness(struct acx565akm_panel *lcd)
> +{
> + u8 bv;
> +
> + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, &bv, 1);
> +
> + return bv;
> +}
> +
> +static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
> +{
> + u16 ctrl;
> + int bv;
> +
> + bv = level | (1 << 8);
> + acx565akm_write(lcd, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, (u8 *)&bv, 2);
> +
> + acx565akm_read(lcd, MIPI_DCS_GET_CONTROL_DISPLAY, (u8 *)&ctrl, 1);
> + if (level)
> + ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
> + CTRL_DISP_BACKLIGHT_ON;
> + else
> + ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
> + CTRL_DISP_BACKLIGHT_ON);
> +
> + ctrl |= 1 << 8;
> + acx565akm_write(lcd, MIPI_DCS_WRITE_CONTROL_DISPLAY, (u8 *)&ctrl, 2);
> +}
> +
> +static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
> + int level;
> +
> + if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
> + dev->props.power == FB_BLANK_UNBLANK)
> + level = dev->props.brightness;
> + else
> + level = 0;
> +
> + acx565akm_set_brightness(lcd, level);
> +
> + return 0;
> +}
> +
> +static int acx565akm_bl_update_status(struct backlight_device *dev)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
> + int ret;
> +
> + mutex_lock(&lcd->mutex);
> + ret = acx565akm_bl_update_status_locked(dev);
> + mutex_unlock(&lcd->mutex);
> +
> + return ret;
> +}
> +
> +static int acx565akm_bl_get_intensity(struct backlight_device *dev)
> +{
> + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
> + unsigned int intensity;
> +
> + mutex_lock(&lcd->mutex);
> +
> + if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
> + dev->props.power == FB_BLANK_UNBLANK)
> + intensity = acx565akm_get_actual_brightness(lcd);
> + else
> + intensity = 0;
> +
> + mutex_unlock(&lcd->mutex);
> +
> + return intensity;
> +}
> +
> +static const struct backlight_ops acx565akm_bl_ops = {
> + .get_brightness = acx565akm_bl_get_intensity,
> + .update_status = acx565akm_bl_update_status,
> +};
> +
> +static int acx565akm_backlight_init(struct acx565akm_panel *lcd)
> +{
> + struct backlight_properties props = {
> + .fb_blank = FB_BLANK_UNBLANK,
> + .power = FB_BLANK_UNBLANK,
> + .type = BACKLIGHT_RAW,
> + };
> + int ret;
> +
> + lcd->backlight = backlight_device_register(lcd->name, &lcd->spi->dev,
> + lcd, &acx565akm_bl_ops,
> + &props);
> + if (IS_ERR(lcd->backlight)) {
> + ret = PTR_ERR(lcd->backlight);
> + lcd->backlight = NULL;
> + return ret;
> + }
> +
> + if (lcd->has_cabc) {
> + ret = sysfs_create_group(&lcd->backlight->dev.kobj,
> + &acx565akm_cabc_attr_group);
> + if (ret < 0) {
> + dev_err(&lcd->spi->dev,
> + "%s failed to create sysfs files\n", __func__);
> + backlight_device_unregister(lcd->backlight);
> + return ret;
> + }
> +
> + lcd->cabc_mode = acx565akm_get_hw_cabc_mode(lcd);
> + }
> +
> + lcd->backlight->props.max_brightness = 255;
> + lcd->backlight->props.brightness = acx565akm_get_actual_brightness(lcd);
> +
> + acx565akm_bl_update_status_locked(lcd->backlight);
> +
> + return 0;
> +}
> +
> +static void acx565akm_backlight_cleanup(struct acx565akm_panel *lcd)
> +{
> + if (lcd->has_cabc)
> + sysfs_remove_group(&lcd->backlight->dev.kobj,
> + &acx565akm_cabc_attr_group);
> +
> + backlight_device_unregister(lcd->backlight);
> +}
> +
> +/*
> -----------------------------------------------------------------------------
> + * DRM Bridge Operations
> + */
> +
> +static void acx565akm_set_sleep_mode(struct acx565akm_panel *lcd, int on)
> +{
> + int cmd = on ? MIPI_DCS_ENTER_SLEEP_MODE : MIPI_DCS_EXIT_SLEEP_MODE;
> + unsigned long wait;
> +
> + /*
> + * We have to keep 120msec between sleep in/out commands.
> + * (8.2.15, 8.2.16).
> + */
> + wait = lcd->hw_guard_end - jiffies;
> + if ((long)wait > 0 && wait <= lcd->hw_guard_wait) {
> + set_current_state(TASK_UNINTERRUPTIBLE);
> + schedule_timeout(wait);
> + }
> +
> + acx565akm_cmd(lcd, cmd);
> +
> + lcd->hw_guard_wait = msecs_to_jiffies(120);
> + lcd->hw_guard_end = jiffies + lcd->hw_guard_wait;
> +}
> +
> +static void acx565akm_set_display_state(struct acx565akm_panel *lcd,
> + int enabled)
> +{
> + int cmd = enabled ? MIPI_DCS_SET_DISPLAY_ON : MIPI_DCS_SET_DISPLAY_OFF;
> +
> + acx565akm_cmd(lcd, cmd);
> +}
> +
> +static int acx565akm_power_on(struct acx565akm_panel *lcd)
> +{
> + /*FIXME tweak me */
> + msleep(50);
> +
> + gpiod_set_value(lcd->reset_gpio, 1);
> +
> + if (lcd->enabled) {
> + dev_dbg(&lcd->spi->dev, "panel already enabled\n");
> + return 0;
> + }
> +
> + /*
> + * We have to meet all the following delay requirements:
> + * 1. tRW: reset pulse width 10usec (7.12.1)
> + * 2. tRT: reset cancel time 5msec (7.12.1)
> + * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
> + * case (7.6.2)
> + * 4. 120msec before the sleep out command (7.12.1)
> + */
> + msleep(120);
> +
> + acx565akm_set_sleep_mode(lcd, 0);
> + lcd->enabled = true;
> +
> + /* 5msec between sleep out and the next command. (8.2.16) */
> + usleep_range(5000, 10000);
> + acx565akm_set_display_state(lcd, 1);
> + acx565akm_set_cabc_mode(lcd, lcd->cabc_mode);
> +
> + return acx565akm_bl_update_status_locked(lcd->backlight);
> +}
> +
> +static void acx565akm_power_off(struct acx565akm_panel *lcd)
> +{
> + if (!lcd->enabled)
> + return;
> +
> + acx565akm_set_display_state(lcd, 0);
> + acx565akm_set_sleep_mode(lcd, 1);
> + lcd->enabled = false;
> + /*
> + * We have to provide PCLK,HS,VS signals for 2 frames (worst case
> + * ~50msec) after sending the sleep in command and asserting the
> + * reset signal. We probably could assert the reset w/o the delay
> + * but we still delay to avoid possible artifacts. (7.6.1)
> + */
> + msleep(50);
> +
> + gpiod_set_value(lcd->reset_gpio, 0);
> +
> + /* FIXME need to tweak this delay */
> + msleep(100);
> +}
> +
> +static int acx565akm_disable(struct drm_panel *panel)
> +{
> + struct acx565akm_panel *lcd = to_acx565akm_device(panel);
> +
> + mutex_lock(&lcd->mutex);
> + acx565akm_power_off(lcd);
> + mutex_unlock(&lcd->mutex);
> +
> + return 0;
> +}
> +
> +static int acx565akm_enable(struct drm_panel *panel)
> +{
> + struct acx565akm_panel *lcd = to_acx565akm_device(panel);
> +
> + mutex_lock(&lcd->mutex);
> + acx565akm_power_on(lcd);
> + mutex_unlock(&lcd->mutex);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode acx565akm_mode = {
> + .clock = 24000,
> + .hdisplay = 800,
> + .hsync_start = 800 + 28,
> + .hsync_end = 800 + 28 + 4,
> + .htotal = 800 + 28 + 4 + 24,
> + .vdisplay = 480,
> + .vsync_start = 480 + 3,
> + .vsync_end = 480 + 3 + 3,
> + .vtotal = 480 + 3 + 3 + 4,
> + .vrefresh = 57,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .width_mm = 77,
> + .height_mm = 46,
> +};
> +
> +static int acx565akm_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &acx565akm_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = acx565akm_mode.width_mm;
> + connector->display_info.height_mm = acx565akm_mode.height_mm;
> + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
> + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
> + | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs acx565akm_funcs = {
> + .disable = acx565akm_disable,
> + .enable = acx565akm_enable,
> + .get_modes = acx565akm_get_modes,
> +};
> +
> +/*
> -----------------------------------------------------------------------------
> + * Probe, Detect and Remove
> + */
> +
> +static int acx565akm_detect(struct acx565akm_panel *lcd)
> +{
> + __be32 value;
> + u32 status;
> + int ret = 0;
> +
> + /*
> + * After being taken out of reset the panel needs 5ms before the first
> + * command can be sent.
> + */
> + gpiod_set_value(lcd->reset_gpio, 1);
> + usleep_range(5000, 10000);
> +
> + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_STATUS, (u8 *)&value, 4);
> + status = __be32_to_cpu(value);
> + lcd->enabled = (status & (1 << 17)) && (status & (1 << 10));
> +
> + dev_dbg(&lcd->spi->dev,
> + "LCD panel %s by bootloader (status 0x%04x)\n",
> + lcd->enabled ? "enabled" : "disabled ", status);
> +
> + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_ID, lcd->display_id, 3);
> + dev_dbg(&lcd->spi->dev, "MIPI display ID: %02x%02x%02x\n",
> + lcd->display_id[0], lcd->display_id[1], lcd->display_id[2]);
> +
> + switch (lcd->display_id[0]) {
> + case 0x10:
> + lcd->model = MIPID_VER_ACX565AKM;
> + lcd->name = "acx565akm";
> + lcd->has_bc = 1;
> + lcd->has_cabc = 1;
> + break;
> + case 0x29:
> + lcd->model = MIPID_VER_L4F00311;
> + lcd->name = "l4f00311";
> + break;
> + case 0x45:
> + lcd->model = MIPID_VER_LPH8923;
> + lcd->name = "lph8923";
> + break;
> + case 0x83:
> + lcd->model = MIPID_VER_LS041Y3;
> + lcd->name = "ls041y3";
> + break;
> + default:
> + lcd->name = "unknown";
> + dev_err(&lcd->spi->dev, "unknown display ID\n");
> + ret = -ENODEV;
> + goto done;
> + }
> +
> + lcd->revision = lcd->display_id[1];
> +
> + dev_info(&lcd->spi->dev, "%s rev %02x panel detected\n",
> + lcd->name, lcd->revision);
> +
> +done:
> + if (!lcd->enabled)
> + gpiod_set_value(lcd->reset_gpio, 0);
> +
> + return ret;
> +}
> +
> +static int acx565akm_probe(struct spi_device *spi)
> +{
> + struct acx565akm_panel *lcd;
> + int ret;
> +
> + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
> + if (lcd == NULL)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, lcd);
> + spi->mode = SPI_MODE_3;
> +
> + lcd->spi = spi;
> + mutex_init(&lcd->mutex);
> +
> + lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(lcd->reset_gpio)) {
> + dev_err(&spi->dev, "failed to get reset GPIO\n");
> + return PTR_ERR(lcd->reset_gpio);
> + }
> +
> + ret = acx565akm_detect(lcd);
> + if (ret < 0) {
> + dev_err(&spi->dev, "panel detection failed\n");
> + return ret;
> + }
> +
> + if (lcd->has_bc) {
> + ret = acx565akm_backlight_init(lcd);
> + if (ret < 0)
> + return ret;
> + }
> +
> + drm_panel_init(&lcd->panel);
> + lcd->panel.dev = &lcd->spi->dev;
> + lcd->panel.funcs = &acx565akm_funcs;
> +
> + ret = drm_panel_add(&lcd->panel);
> + if (ret < 0) {
> + if (lcd->has_bc)
> + acx565akm_backlight_cleanup(lcd);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int acx565akm_remove(struct spi_device *spi)
> +{
> + struct acx565akm_panel *lcd = spi_get_drvdata(spi);
> +
> + drm_panel_remove(&lcd->panel);
> +
> + if (lcd->has_bc)
> + acx565akm_backlight_cleanup(lcd);
> +
> + drm_panel_disable(&lcd->panel);
> + drm_panel_unprepare(&lcd->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id acx565akm_of_match[] = {
> + { .compatible = "sony,acx565akm", },
> + { /* sentinel */ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, acx565akm_of_match);
> +
> +static struct spi_driver acx565akm_driver = {
> + .probe = acx565akm_probe,
> + .remove = acx565akm_remove,
> + .driver = {
> + .name = "panel-sony-acx565akm",
> + .of_match_table = acx565akm_of_match,
> + },
> +};
> +
> +module_spi_driver(acx565akm_driver);
> +
> +MODULE_ALIAS("spi:sony,acx565akm");
> +MODULE_AUTHOR("Nokia Corporation");
> +MODULE_DESCRIPTION("Sony ACX565AKM LCD Panel Driver");
> +MODULE_LICENSE("GPL");
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
