This patch series begins to add support for the external display over HDMI that is supported on msm8974 SoCs. I'm testing this series on the Nexus 5, and I'm able to communicate with the HDMI bridge via the analogix-anx78xx driver, however the external display is not working yet.
When I plug in the HDMI cable, the monitor detects that a device is hooked up, but nothing is shown on the external monitor. The hot plug detect GPIO (hpd-gpios) on the analogix-anx78xx bridge and MSM HDMI drivers do not change state when the slimport adapter or HDMI cable is plugged in or removed. I wonder if a regulator is not enabled somewhere? I have a comment in patch 10 regarding 'hpd-gdsc-supply' that may potentially be an issue. I'm still digging in on this, however I'd appreciate any feedback if anyone has time. Most of these patches are ready now, so I marked the ones that aren't ready with 'PATCH RFC'. I'm using an Analogix Semiconductor SP6001 SlimPort Micro-USB to 4K HDMI Adapter to connect my phone to an external display via a standard HDMI cable. This works just fine with the downstream MSM kernel using Android. Brian Masney (11): dt-bindings: drm/bridge: analogix-anx78xx: add new variants drm/bridge: analogix-anx78xx: add new variants drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings drm/bridge: analogix-anx78xx: convert to i2c_new_dummy_device drm/bridge: analogix-anx78xx: correct value of TX_P0 drm/bridge: analogix-anx78xx: add support for avdd33 regulator ARM: qcom_defconfig: add CONFIG_DRM_ANALOGIX_ANX78XX drm/msm/hdmi: silence -EPROBE_DEFER warning ARM: dts: qcom: pm8941: add 5vs2 regulator node ARM: dts: qcom: msm8974: add HDMI nodes ARM: dts: qcom: msm8974-hammerhead: add support for external display .../bindings/display/bridge/anx7814.txt | 6 +- .../qcom-msm8974-lge-nexus5-hammerhead.dts | 140 ++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 80 ++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 10 ++ arch/arm/configs/qcom_defconfig | 1 + drivers/gpu/drm/bridge/analogix-anx78xx.c | 60 +++++++- drivers/gpu/drm/bridge/analogix-anx78xx.h | 2 +- drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 8 +- 8 files changed, 295 insertions(+), 12 deletions(-) -- 2.21.0