Hi Sascha, On 09/12/2012 03:31 AM, Sascha Hauer wrote:
From: Philipp Zabel<p.za...@pengutronix.de>Signed-off-by: Philipp Zabel<p.za...@pengutronix.de> Signed-off-by: Sascha Hauer<s.ha...@pengutronix.de> --- .../bindings/staging/imx-drm/fsl-imx-drm.txt | 41 ++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt new file mode 100644 index 0000000..07654f0 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt @@ -0,0 +1,41 @@ +Freescale i.MX IPUv3 +==================== + +Required properties: +- compatible: Should be "fsl,<chip>-ipu" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain sync interrupt and error interrupt, + in this order. +- #crtc-cells: 1, See below + +example: + +ipu: ipu@18000000 { + #crtc-cells =<1>; + compatible = "fsl,imx53-ipu"; + reg =<0x18000000 0x080000000>; + interrupts =<11 10>; +}; + +Parallel display support +======================== + +Required properties: +- compatible: Should be "fsl,imx-parallel-display" +- crtc: the crtc this display is connected to, see below +Optional properties: +- interface_pix_fmt: How this display is connected to the + crtc. Currently supported types: "rgb24", "rgb565" +- edid: verbatim EDID data block describing attached display. +- ddc: phandle describing the i2c bus handling the display data + channel + +example: + +display@di0 { + compatible = "fsl,imx-parallel-display"; + edid = [edid-data]; + crtc =<&ipu 0>; + interface-pix-fmt = "rgb24"; +};
Do you have a working sample of [edid-data] for a parallel/LVDS/HDMI display or know a good way to produce one? Thanks in advance, Eric _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
