There is elaborate code in the HDMI connector handling to
leave the connector in the state it was at power-on and
only touch the GPIOs when the connector .enable() and
.disable() callbacks are called.
I don't think this is what we normally want, initialize
the connector as OFF (possibly saving power?) using the
appropriate GPIO descriptor flags. It will still be
switched on/off in the enable()/disable() connector
callback as before, but we can drop some strange surplus
code.
Cc: Rob Clark <robdcl...@gmail.com>
Cc: Sean Paul <s...@poorly.run>
Cc: linux-arm-...@vger.kernel.org
Cc: freedr...@lists.freedesktop.org
Reviewed-by: Brian Masney <masn...@onstation.org>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
ChangeLog v1->v2:
- Rebased on v5.3-rc1
- Collected review tag
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 19 ++++++++++++-----
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 25 ++++++-----------------
2 files changed, 20 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 355afb936401..5739eec65659 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -552,13 +552,22 @@ static int msm_hdmi_bind(struct device *dev, struct
device *master, void *data)
for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
const char *name = msm_hdmi_gpio_pdata[i].name;
struct gpio_desc *gpiod;
+ enum gpiod_flags flags;
/*
- * We are fetching the GPIO lines "as is" since the connector
- * code is enabling and disabling the lines. Until that point
- * the power-on default value will be kept.
+ * Notice the inverse set up here: we initialize the connector
+ * to OFF state.
*/
- gpiod = devm_gpiod_get_optional(dev, name, GPIOD_ASIS);
+ if (msm_hdmi_gpio_pdata[i].output) {
+ if (msm_hdmi_gpio_pdata[i].value)
+ flags = GPIOD_OUT_LOW;
+ else
+ flags = GPIOD_OUT_HIGH;
+ } else {
+ flags = GPIOD_IN;
+ }
+
+ gpiod = devm_gpiod_get_optional(dev, name, flags);
/* This will catch e.g. -PROBE_DEFER */
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
@@ -572,7 +581,7 @@ static int msm_hdmi_bind(struct device *dev, struct device
*master, void *data)
* in the upstream bindings.
*/
if (sscanf(name, "qcom,hdmi-tx-%s", name3))
- gpiod = devm_gpiod_get_optional(dev, name3,
GPIOD_ASIS);
+ gpiod = devm_gpiod_get_optional(dev, name3,
flags);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (!gpiod)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index d0575d4f747d..f006682935e9 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -75,16 +75,9 @@ static int gpio_config(struct hdmi *hdmi, bool on)
for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
struct hdmi_gpio_data gpio = config->gpios[i];
- if (gpio.gpiod) {
- if (gpio.output) {
- gpiod_direction_output(gpio.gpiod,
- gpio.value);
- } else {
- gpiod_direction_input(gpio.gpiod);
- gpiod_set_value_cansleep(gpio.gpiod,
- gpio.value);
- }
- }
+ /* The value indicates the value for turning things on
*/
+ if (gpio.gpiod)
+ gpiod_set_value_cansleep(gpio.gpiod,
gpio.value);
}
DBG("gpio on");
@@ -92,16 +85,10 @@ static int gpio_config(struct hdmi *hdmi, bool on)
for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) {
struct hdmi_gpio_data gpio = config->gpios[i];
- if (!gpio.gpiod)
- continue;
-
- if (gpio.output) {
- int value = gpio.value ? 0 : 1;
-
- gpiod_set_value_cansleep(gpio.gpiod, value);
- }
+ /* The inverse value turns stuff off */
+ if (gpio.gpiod && gpio.output)
+ gpiod_set_value_cansleep(gpio.gpiod,
!gpio.value);
};
-
DBG("gpio off");
}
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
