________________________________ From: Ville Syrjälä <[email protected]> Sent: Saturday, August 24, 2019 02:41 To: Lin, Wayne <[email protected]> Cc: [email protected] <[email protected]>; [email protected] <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Kazlauskas, Nicholas <[email protected]> Subject: Re: [PATCH] drm/drm_connector: add additional aspect ratio values
On Thu, Aug 22, 2019 at 05:50:02PM -0400, Wayne Lin wrote: > For HDMI2.0 CTS item - HF1-35, it verifies if the source generates > video timing "64:27" video format correctly. > > eg: (vic-76) 1920x1080p@60Hz,24bpp > > This patch add on "64:27" and "256:135" to drm_aspect_ratio_enum_list. > Thereafter, one can specify the aspect ratio to "64:27" or "256:135" > after creating aspect ratio property. > > Change-Id: Ifc9df54e8e8f78e70960fcd737a3a57e49c81152 > Signed-off-by: Wayne Lin <[email protected]> > --- > drivers/gpu/drm/drm_connector.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c > index 3a0cacb71235..c0629a01d08e 100644 > --- a/drivers/gpu/drm/drm_connector.c > +++ b/drivers/gpu/drm/drm_connector.c > @@ -772,6 +772,8 @@ static const struct drm_prop_enum_list > drm_aspect_ratio_enum_list[] = { > { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" }, > { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" }, > { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, > + { DRM_MODE_PICTURE_ASPECT_64_27, "64:27" }, > + { DRM_MODE_PICTURE_ASPECT_256_135, "256:135" }, > Not 100% sure we want to expose these via the property because the > infoframe can't convey these independently from the VIC. Agree with that it can't be independent from the VIC. When building up hdmi avi infoframe by using "drm_hdmi_avi_infoframe_from_display_mode" in drm_edid, it will refer to the VIC to set up the aspect ratio if the aspect ratio is not specified in mode. However, if the aspect ratio is specified to a value other than none, current logic of code will use the specified value. The main reason of this patch is for capable indicating the exact VIC wanted. There are some modes defined in CTA-861 with same timing but different aspect ratio. eg: VIC 103 & VIC 93 Without these new definitions, we cannot distinguish these different modes and might set a wrong VIC in AVI infoframe. > }; > > static const struct drm_prop_enum_list drm_content_type_enum_list[] = { > -- > 2.17.1 > > _______________________________________________ > dri-devel mailing list > [email protected] > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- Ville Syrjälä Intel
_______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
