Hi Ville,
On Mon, 2 Sep 2019 16:15:46 +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Let's make cea_db_offsets() a bit more convenient to use by
> setting the start/end offsets to zero whenever the data block
> collection isn't present. This makes it safe for the caller
> to blindly iterate the data blocks even if there are none.
>
> Cc: Jean Delvare <jdelv...@suse.de>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 7b3072fc550b..e5905dc764c1 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -3690,6 +3690,9 @@ cea_revision(const u8 *cea)
> static int
> cea_db_offsets(const u8 *cea, int *start, int *end)
> {
> + *start = 0;
> + *end = 0;
> +
> if (cea_revision(cea) < 3)
> return -ENOTSUPP;
>
> @@ -4116,10 +4119,7 @@ static void drm_edid_to_eld(struct drm_connector
> *connector, struct edid *edid)
> if (cea_revision(cea) >= 3) {
> int i, start, end;
>
> - if (cea_db_offsets(cea, &start, &end)) {
> - start = 0;
> - end = 0;
> - }
> + cea_db_offsets(cea, &start, &end);
>
> for_each_cea_db(cea, i, start, end) {
> db = &cea[i];
Not sure if that's really needed. As it stands there's only one
function which wants to continue after cea_db_offsets() fails, all
others just bail out at that point. Now that cea_db_offsets() checks
for revision >= 3, the construct above could simply become:
int i, start, end;
if (cea_db_offsets(cea, &start, &end) == 0) {
for_each_cea_db(cea, i, start, end) {
db = &cea[i];
which is IMHO more elegant and does not require zeroing start and end
in cea_db_offsets().
--
Jean Delvare
SUSE L3 Support
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
