This adds documentation for innolux,p097pfg panel with bridge chip
ssd2858.

Signed-off-by: Jitao Shi <jitao....@mediatek.com>
---
 .../display/panel/innolux,p097pfg_ssd2858.txt | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt

diff --git 
a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt 
b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt
new file mode 100644
index 000000000000..4ce55e889ad2
--- /dev/null
+++ 
b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt
@@ -0,0 +1,39 @@
+SSD2858 bridge + Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg_ssd2858"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides panel positive voltage
+- avee-supply: phandle of the regulator that provides panel negative voltage
+- pp1800-supply: phandle of the regulator that provides panel 1.8V IO power
+- pp3300-supply: phandle of the regulator that provides ssd2858 3.3V URAM power
+- pp1200-bridge-supply: phandle of the regulator that provides ssd2858 1.2V 
core power
+- vddio-bridge-supply: phandle of the regulator that provides ssd2858 1.8V IO 
power
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+       &dsi0 {
+               panel: panel@0 {
+                       compatible = "innolux,p097pfg_ssd2858";
+                       reg = <0>;
+                       enable-gpios = <&pio 45 0 &pio 73 0>;
+                       avdd-supply = <...>;
+                       avee-supply = <...>;
+                       pp1800-supply = <...>;
+                       pp3300-supply = <...>;
+                       pp1200-bridge-supply = <...>;
+                       vddio-bridge-supply = <...>;
+                       backlight = <&backlight_lcd0>;
+                       status = "okay";
+                       port {
+                               panel_in: endpoint {
+                                       remote-endpoint = <&dsi_out>;
+                               };
+                       };
+               };
+
+       };
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to