Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
the initialization command (Rock wang)
V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)
V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)
V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
Signed-off-by: Jerry Han <[email protected]>
Cc: Jitao Shi <[email protected]>
Cc: Derek Basehore <[email protected]>
Cc: Rock wang <[email protected]>
---
MAINTAINERS | 12 +-
drivers/gpu/drm/panel/Kconfig | 22 +-
drivers/gpu/drm/panel/panel-boe-himax8279d.c | 201 +++++++++----------
3 files changed, 114 insertions(+), 121 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7c6ac18b922e..bd0fadb9ea18 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5085,6 +5085,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/bochs/
+DRM DRIVER FOR BOE HIMAX8279D PANELS
+M: Jerry Han <[email protected]>
+S: Maintained
+F: drivers/gpu/drm/panel/panel-boe-himax8279d.c
+F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
M: Linus Walleij <[email protected]>
T: git git://anongit.freedesktop.org/drm/drm-misc
@@ -5110,12 +5116,6 @@ S: Maintained
F: drivers/gpu/drm/tiny/ili9225.c
F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
-DRM DRIVER FOR BOE HIMAX8279D PANELS
-M: Jerry Han <[email protected]>
-S: Maintained
-F: drivers/gpu/drm/panel/panel-boe-himax8279d.c
-F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
-
DRM DRIVER FOR HX8357D PANELS
M: Eric Anholt <[email protected]>
T: git git://anongit.freedesktop.org/drm/drm-misc
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index cfd8c886fff7..683ff77a3733 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -18,6 +18,17 @@ config DRM_PANEL_ARM_VERSATILE
reference designs. The panel is detected using special registers
in the Versatile family syscon registers.
+config DRM_PANEL_BOE_HIMAX8279D
+ tristate "Boe Himax8279d panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Boe Himax8279d
+ TFT-LCD modules. The panel has a 1200x1920 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host and has a built-in LED backlight.
+
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
@@ -339,17 +350,6 @@ config DRM_PANEL_TPO_TD043MTEA1
Say Y here if you want to enable support for TPO TD043MTEA1 800x480
4.3" panel (found on the OMAP3 Pandora board).
-config DRM_PANEL_BOE_HIMAX8279D
- tristate "Boe Himax8279d panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for Same type
- TFT-LCD modules. The panel has a 1200x1920 resolution and uses
- 24 bit RGB per pixel. It provides a MIPI DSI interface to
- the host and has a built-in LED backlight.
-
config DRM_PANEL_TPO_TPG110
tristate "TPO TPG 800x400 panel"
depends on OF && SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c
b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
index 60f5f8bf2e14..aa7d91279819 100644
--- a/drivers/gpu/drm/panel/panel-boe-himax8279d.c
+++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
@@ -17,10 +17,10 @@
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
-#include <drm/drm_modes.h>
+#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_device.h>
#include <drm/drm_print.h>
#include <video/mipi_display.h>
@@ -37,15 +37,16 @@ struct panel_cmd {
struct panel_desc {
const struct drm_display_mode *display_mode;
unsigned int bpc;
- unsigned int width;
- unsigned int height;
+ unsigned int width_mm;
+ unsigned int height_mm;
unsigned int delay_t1;
unsigned int reset_delay_t2;
unsigned int reset_delay_t3;
unsigned int reset_delay_t4;
+ unsigned int reset_delay_t5;
- unsigned long flags;
+ unsigned long mode_flags;
enum mipi_dsi_pixel_format format;
unsigned int lanes;
const struct panel_cmd *on_cmds;
@@ -58,7 +59,7 @@ struct panel_info {
const struct panel_desc *desc;
struct backlight_device *backlight;
- struct gpio_desc *reset_gpio;
+ struct gpio_desc *enable_gpio;
struct gpio_desc *pp33_gpio;
struct gpio_desc *pp18_gpio;
@@ -66,19 +67,49 @@ struct panel_info {
bool enabled;
};
+static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct panel_info, base);
+}
+
void set_gpios(struct panel_info *pinfo, int enable)
{
- gpiod_set_value(pinfo->reset_gpio, enable);
+ gpiod_set_value(pinfo->enable_gpio, enable);
gpiod_set_value(pinfo->pp33_gpio, enable);
gpiod_set_value(pinfo->pp18_gpio, enable);
}
-static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+static int send_mipi_cmds(struct drm_panel *panel, const struct panel_cmd
*cmds)
{
- return container_of(panel, struct panel_info, base);
+ struct panel_info *pinfo = to_panel_info(panel);
+ unsigned int i = 0;
+ int err;
+
+ if (!cmds)
+ return -EFAULT;
+
+ for (i = 0; cmds[i].len != 0; i++) {
+ const struct panel_cmd *cmd = &cmds[i];
+
+ if (cmd->len == 2)
+ err = mipi_dsi_dcs_write(pinfo->link,
+ cmd->data[1], NULL, 0);
+ else
+ err = mipi_dsi_dcs_write(pinfo->link,
+ cmd->data[1], cmd->data + 2,
+ cmd->len - 2);
+
+ if (err < 0)
+ return err;
+
+ usleep_range((cmd->data[0]) * 1000,
+ (1 + cmd->data[0]) * 1000);
+ }
+
+ return 0;
}
-static int panel_disable(struct drm_panel *panel)
+static int boe_panel_disable(struct drm_panel *panel)
{
struct panel_info *pinfo = to_panel_info(panel);
@@ -89,7 +120,7 @@ static int panel_disable(struct drm_panel *panel)
return 0;
}
-static int panel_unprepare(struct drm_panel *panel)
+static int boe_panel_unprepare(struct drm_panel *panel)
{
struct panel_info *pinfo = to_panel_info(panel);
int err;
@@ -98,34 +129,14 @@ static int panel_unprepare(struct drm_panel *panel)
return 0;
/* send off code */
- if (pinfo->desc->off_cmds) {
- const struct panel_cmd *cmds = pinfo->desc->off_cmds;
- unsigned int i;
-
- for (i = 0; cmds[i].len != 0; i++) {
- const struct panel_cmd *cmd = &cmds[i];
-
- if (cmd->len == 2)
- err = mipi_dsi_dcs_write(pinfo->link,
- cmd->data[1], NULL, 0);
- else
- err = mipi_dsi_dcs_write(pinfo->link,
- cmd->data[1], cmd->data + 2,
- cmd->len - 2);
-
- if (err < 0) {
- dev_err(panel->dev,
- "failed to send DCS Off Code: %d\n",
- err);
- goto poweroff;
- }
- if (cmd->data[0])
- usleep_range((cmd->data[0]) * 1000,
- (1 + cmd->data[0]) * 1000);
- }
+ err = send_mipi_cmds(panel, pinfo->desc->off_cmds);
+ if (err < 0) {
+ dev_err(panel->dev,
+ "failed to send DCS Off Code: %d\n",
+ err);
+ goto poweroff;
}
- usleep_range(1000, 1000);
set_gpios(pinfo, 0);
pinfo->prepared = false;
@@ -137,7 +148,7 @@ static int panel_unprepare(struct drm_panel *panel)
return err;
}
-static int panel_prepare(struct drm_panel *panel)
+static int boe_panel_prepare(struct drm_panel *panel)
{
struct panel_info *pinfo = to_panel_info(panel);
const struct panel_desc *desc = pinfo->desc;
@@ -152,47 +163,27 @@ static int panel_prepare(struct drm_panel *panel)
gpiod_set_value(pinfo->pp33_gpio, 1);
/* reset sequence */
- // T2 (> 14ms)
usleep_range(desc->reset_delay_t2, 1000 + desc->reset_delay_t2);
- // T3 (>= 0ms)
if (desc->reset_delay_t3) {
- gpiod_set_value(pinfo->reset_gpio, 1);
+ gpiod_set_value(pinfo->enable_gpio, 1);
usleep_range(desc->reset_delay_t3, 1000 + desc->reset_delay_t3);
- gpiod_set_value(pinfo->reset_gpio, 0);
+ gpiod_set_value(pinfo->enable_gpio, 0);
}
- // T4 (> 20us)
usleep_range(desc->reset_delay_t4, 1000 + desc->reset_delay_t4);
- gpiod_set_value(pinfo->reset_gpio, 1);
+ gpiod_set_value(pinfo->enable_gpio, 1);
+
+ if (desc->reset_delay_t5)
+ usleep_range(desc->reset_delay_t5, 1000 + desc->reset_delay_t5);
/* send init code */
- if (pinfo->desc->on_cmds) {
- const struct panel_cmd *cmds = pinfo->desc->on_cmds;
- unsigned int i;
-
- for (i = 0; cmds[i].len != 0; i++) {
- const struct panel_cmd *cmd = &cmds[i];
-
- if (cmd->len == 2)
- err = mipi_dsi_dcs_write(pinfo->link,
- cmd->data[1], NULL, 0);
- else
- err = mipi_dsi_dcs_write(pinfo->link,
- cmd->data[1], cmd->data + 2,
- cmd->len - 2);
-
- if (err < 0) {
- dev_err(panel->dev,
- "failed to send DCS Init Code: %d\n",
- err);
- goto poweroff;
- }
-
- if (cmd->data[0])
- usleep_range(cmd->data[0] * 1000,
- (1 + cmd->data[0]) * 1000);
- }
+ err = send_mipi_cmds(panel, pinfo->desc->on_cmds);
+ if (err < 0) {
+ dev_err(panel->dev,
+ "failed to send DCS Init Code: %d\n",
+ err);
+ goto poweroff;
}
pinfo->prepared = true;
@@ -204,7 +195,7 @@ static int panel_prepare(struct drm_panel *panel)
return err;
}
-static int panel_enable(struct drm_panel *panel)
+static int boe_panel_enable(struct drm_panel *panel)
{
struct panel_info *pinfo = to_panel_info(panel);
int ret;
@@ -224,7 +215,7 @@ static int panel_enable(struct drm_panel *panel)
return 0;
}
-static int panel_get_modes(struct drm_panel *panel)
+static int boe_panel_get_modes(struct drm_panel *panel)
{
struct panel_info *pinfo = to_panel_info(panel);
const struct drm_display_mode *m = pinfo->desc->display_mode;
@@ -232,7 +223,7 @@ static int panel_get_modes(struct drm_panel *panel)
mode = drm_mode_duplicate(panel->drm, m);
if (!mode) {
- DRM_DEV_ERROR(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+ DRM_DEV_ERROR(panel->drm->dev, "failed to add mode %ux%u@%u\n",
m->hdisplay, m->vdisplay, m->vrefresh);
return -ENOMEM;
}
@@ -241,19 +232,19 @@ static int panel_get_modes(struct drm_panel *panel)
drm_mode_probed_add(panel->connector, mode);
- panel->connector->display_info.width_mm = pinfo->desc->width;
- panel->connector->display_info.height_mm = pinfo->desc->height;
+ panel->connector->display_info.width_mm = pinfo->desc->width_mm;
+ panel->connector->display_info.height_mm = pinfo->desc->height_mm;
panel->connector->display_info.bpc = pinfo->desc->bpc;
return 1;
}
static const struct drm_panel_funcs panel_funcs = {
- .disable = panel_disable,
- .unprepare = panel_unprepare,
- .prepare = panel_prepare,
- .enable = panel_enable,
- .get_modes = panel_get_modes,
+ .disable = boe_panel_disable,
+ .unprepare = boe_panel_unprepare,
+ .prepare = boe_panel_prepare,
+ .enable = boe_panel_enable,
+ .get_modes = boe_panel_get_modes,
};
/* 8 inch */
@@ -579,7 +570,7 @@ static const struct panel_cmd boe_himax8279d8p_on_cmds[] = {
static const struct panel_cmd boe_himax8279d8p_off_cmds[] = {
_INIT_CMD(0x00, 0x28),
- _INIT_CMD(0x00, 0x10),
+ _INIT_CMD(0x01, 0x10),
{},
};
@@ -587,14 +578,15 @@ static const struct panel_cmd boe_himax8279d8p_off_cmds[]
= {
static const struct panel_desc boe_himax8279d8p_panel_desc = {
.display_mode = &boe_himax8279d8p_display_mode,
.bpc = 8,
- .width = 107,
- .height = 172,
+ .width_mm = 107,
+ .height_mm = 172,
.delay_t1 = 5000,
.reset_delay_t2 = 14000,
.reset_delay_t3 = 1000,
.reset_delay_t4 = 1000,
- .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
- MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .reset_delay_t5 = 5000,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
.on_cmds = boe_himax8279d8p_on_cmds,
@@ -921,7 +913,7 @@ static const struct panel_cmd boe_himax8279d10p_on_cmds[] =
{
static const struct panel_cmd boe_himax8279d10p_off_cmds[] = {
_INIT_CMD(0x00, 0x28),
- _INIT_CMD(0x00, 0x10),
+ _INIT_CMD(0x01, 0x10),
{},
};
@@ -929,14 +921,15 @@ static const struct panel_cmd
boe_himax8279d10p_off_cmds[] = {
static const struct panel_desc boe_himax8279d10p_panel_desc = {
.display_mode = &boe_himax8279d10p_display_mode,
.bpc = 8,
- .width = 135,
- .height = 216,
+ .width_mm = 135,
+ .height_mm = 216,
.delay_t1 = 5000,
.reset_delay_t2 = 14000,
.reset_delay_t3 = 1000,
.reset_delay_t4 = 1000,
- .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
- MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
+ .reset_delay_t5 = 5000,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM,
.format = MIPI_DSI_FMT_RGB888,
.lanes = 4,
.on_cmds = boe_himax8279d10p_on_cmds,
@@ -946,11 +939,11 @@ static const struct panel_desc
boe_himax8279d10p_panel_desc = {
static const struct of_device_id panel_of_match[] = {
{ .compatible = "boe,himax8279d8p",
.data = &boe_himax8279d8p_panel_desc
- },
- { .compatible = "boe,himax8279d10p",
+ }, { .compatible = "boe,himax8279d10p",
.data = &boe_himax8279d10p_panel_desc
- },
- { }
+ }, {
+ /* sentinel */
+ }
};
MODULE_DEVICE_TABLE(of, panel_of_match);
@@ -973,12 +966,12 @@ static int panel_add(struct panel_info *pinfo)
pinfo->pp33_gpio = NULL;
}
- pinfo->reset_gpio = devm_gpiod_get_optional(dev, "enable",
+ pinfo->enable_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_LOW);
- if (IS_ERR(pinfo->reset_gpio)) {
- err = PTR_ERR(pinfo->reset_gpio);
+ if (IS_ERR(pinfo->enable_gpio)) {
+ err = PTR_ERR(pinfo->enable_gpio);
dev_err(dev, "failed to get enable gpio: %d\n", err);
- pinfo->reset_gpio = NULL;
+ pinfo->enable_gpio = NULL;
}
pinfo->backlight = devm_of_find_backlight(dev);
@@ -1005,15 +998,15 @@ static void panel_del(struct panel_info *pinfo)
static int panel_probe(struct mipi_dsi_device *dsi)
{
struct panel_info *pinfo;
- int err;
const struct panel_desc *desc;
+ int err;
pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL);
if (!pinfo)
return -ENOMEM;
desc = of_device_get_match_data(&dsi->dev);
- dsi->mode_flags = desc->flags;
+ dsi->mode_flags = desc->mode_flags;
dsi->format = desc->format;
dsi->lanes = desc->lanes;
pinfo->desc = desc;
@@ -1033,12 +1026,12 @@ static int panel_remove(struct mipi_dsi_device *dsi)
struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
int err;
- err = panel_unprepare(&pinfo->base);
+ err = boe_panel_unprepare(&pinfo->base);
if (err < 0)
DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
err);
- err = panel_disable(&pinfo->base);
+ err = boe_panel_disable(&pinfo->base);
if (err < 0)
DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
@@ -1057,8 +1050,8 @@ static void panel_shutdown(struct mipi_dsi_device *dsi)
{
struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
- panel_disable(&pinfo->base);
- panel_unprepare(&pinfo->base);
+ boe_panel_disable(&pinfo->base);
+ boe_panel_unprepare(&pinfo->base);
}
static struct mipi_dsi_driver panel_driver = {
--
2.17.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
