Hi Matthias,

On 02/10/2019 21:44, Matthias Kaehlcke wrote:
> The DDC/CI protocol involves sending a multi-byte request to the
> display via I2C, which is typically followed by a multi-byte
> response. The internal I2C controller only allows single byte
> reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
> supported when the internal I2C controller is used. The I2C
> transfers complete without errors, however the data in the response
> is garbage. Abort transfers to/from slave address 0x37 (DDC) with
> -EOPNOTSUPP, to make it evident that the communication is failing.
> 
> Signed-off-by: Matthias Kaehlcke <m...@chromium.org>
> Reviewed-by: Douglas Anderson <diand...@chromium.org>
> Reviewed-by: Sean Paul <s...@poorly.run>
> Acked-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> Sorry for the delay with sending v2, I completely forgot about this patch ...
> 
> Changes in v2:
> - updated comment with 'TOFIX' entry as requested by Neil
> - added Neil's 'Acked-by' tag
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 52d220a70362..ac24bceaf415 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -41,6 +41,7 @@
>  
>  #include <media/cec-notifier.h>
>  
> +#define DDC_CI_ADDR          0x37
>  #define DDC_SEGMENT_ADDR     0x30
>  
>  #define HDMI_EDID_LEN                512
> @@ -439,6 +440,15 @@ static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap,
>       u8 addr = msgs[0].addr;
>       int i, ret = 0;
>  
> +     if (addr == DDC_CI_ADDR)
> +             /*
> +              * The internal I2C controller does not support the multi-byte
> +              * read and write operations needed for DDC/CI.
> +              * TOFIX: Blacklist the DDC/CI address until we filter out
> +              * unsupported I2C operations.
> +              */
> +             return -EOPNOTSUPP;
> +
>       dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr);
>  
>       for (i = 0; i < num; i++) {
> 

Applying to drm-misc-next

Thanks !
Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to