On Wed, Nov 06, 2019 at 04:17:52PM +0800, Jitao Shi wrote:
> Seperate the panel power control from prepare/unprepare.
>
> Signed-off-by: Jitao Shi <[email protected]>
Your patch series is all kinds of split up. Can you pls resend, with the
entire thing all in one go?
Thanks, Daniel
> ---
> .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 69 +++++++++++++------
> 1 file changed, 49 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> index e2496a334ab6..5b1b285a2194 100644
> --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> @@ -50,6 +50,7 @@ struct boe_panel {
> struct regulator *avdd;
> struct gpio_desc *enable_gpio;
>
> + bool prepared_power;
> bool prepared;
> bool enabled;
>
> @@ -501,12 +502,11 @@ static int boe_panel_disable(struct drm_panel *panel)
> return 0;
> }
>
> -static int boe_panel_unprepare(struct drm_panel *panel)
> +static int boe_panel_unprepare_power(struct drm_panel *panel)
> {
> struct boe_panel *boe = to_boe_panel(panel);
> - int ret;
>
> - if (!boe->prepared)
> + if (!boe->prepared_power)
> return 0;
>
> if (boe->desc->discharge_on_disable) {
> @@ -518,12 +518,6 @@ static int boe_panel_unprepare(struct drm_panel *panel)
> usleep_range(5000, 7000);
> regulator_disable(boe->pp1800);
> } else {
> - ret = boe_panel_off(boe);
> - if (ret < 0) {
> - dev_err(panel->dev, "failed to set panel off: %d\n",
> - ret);
> - return ret;
> - }
> msleep(150);
> gpiod_set_value(boe->enable_gpio, 0);
> usleep_range(500, 1000);
> @@ -533,17 +527,39 @@ static int boe_panel_unprepare(struct drm_panel *panel)
> regulator_disable(boe->pp1800);
> }
>
> + boe->prepared_power = false;
> +
> + return 0;
> +}
> +
> +static int boe_panel_unprepare(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> + int ret;
> +
> + if (!boe->prepared)
> + return 0;
> +
> + if (!boe->desc->discharge_on_disable) {
> + ret = boe_panel_off(boe);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to set panel off: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> boe->prepared = false;
>
> return 0;
> }
>
> -static int boe_panel_prepare(struct drm_panel *panel)
> +static int boe_panel_prepare_power(struct drm_panel *panel)
> {
> struct boe_panel *boe = to_boe_panel(panel);
> int ret;
>
> - if (boe->prepared)
> + if (boe->prepared_power)
> return 0;
>
> gpiod_set_value(boe->enable_gpio, 0);
> @@ -571,18 +587,10 @@ static int boe_panel_prepare(struct drm_panel *panel)
> gpiod_set_value(boe->enable_gpio, 1);
> usleep_range(6000, 10000);
>
> - ret = boe_panel_init(boe);
> - if (ret < 0) {
> - dev_err(panel->dev, "failed to init panel: %d\n", ret);
> - goto poweroff;
> - }
> -
> - boe->prepared = true;
> + boe->prepared_power = true;
>
> return 0;
>
> -poweroff:
> - regulator_disable(boe->avee);
> poweroffavdd:
> regulator_disable(boe->avdd);
> poweroff1v8:
> @@ -593,6 +601,25 @@ static int boe_panel_prepare(struct drm_panel *panel)
> return ret;
> }
>
> +static int boe_panel_prepare(struct drm_panel *panel)
> +{
> + struct boe_panel *boe = to_boe_panel(panel);
> + int ret;
> +
> + if (boe->prepared)
> + return 0;
> +
> + ret = boe_panel_init(boe);
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to init panel: %d\n", ret);
> + return ret;
> + }
> +
> + boe->prepared = true;
> +
> + return 0;
> +}
> +
> static int boe_panel_enable(struct drm_panel *panel)
> {
> struct boe_panel *boe = to_boe_panel(panel);
> @@ -754,7 +781,9 @@ static int boe_panel_get_modes(struct drm_panel *panel)
> static const struct drm_panel_funcs boe_panel_funcs = {
> .disable = boe_panel_disable,
> .unprepare = boe_panel_unprepare,
> + .unprepare_power = boe_panel_unprepare_power,
> .prepare = boe_panel_prepare,
> + .prepare_power = boe_panel_prepare_power,
> .enable = boe_panel_enable,
> .get_modes = boe_panel_get_modes,
> };
> --
> 2.21.0
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
