Since the introduction of commit 2d99ced787e3 ("drm/msm: async commit
support"), command-mode panels began throwing the following errors:
msm fd900000.mdss: pp done time out, lm=0
Let's fix this by enabling the autorefresh feature that's available in
the MDP starting at version 1.0. This will cause the MDP to
automatically send a frame to the panel every time the panel invokes
the TE signal, which will trigger the PP_DONE IRQ. This requires not
sending a START signal for command-mode panels.
This fixes the error and gives us a counter for command-mode panels that
we can use to implement async commit support for the MDP5 in a follow up
patch.
Signed-off-by: Brian Masney <masn...@onstation.org>
Suggested-by: Jeffrey Hugo <jeffrey.l.h...@gmail.com>
---
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 15 ++++++++++++++-
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c | 9 +--------
2 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
index 05cc04f729d6..539348cb6331 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
@@ -456,6 +456,7 @@ static void mdp5_crtc_atomic_enable(struct drm_crtc *crtc,
{
struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state);
+ struct mdp5_pipeline *pipeline = &mdp5_cstate->pipeline;
struct mdp5_kms *mdp5_kms = get_kms(crtc);
struct device *dev = &mdp5_kms->pdev->dev;
@@ -493,9 +494,21 @@ static void mdp5_crtc_atomic_enable(struct drm_crtc *crtc,
mdp_irq_register(&mdp5_kms->base, &mdp5_crtc->err);
- if (mdp5_cstate->cmd_mode)
+ if (mdp5_cstate->cmd_mode) {
mdp_irq_register(&mdp5_kms->base, &mdp5_crtc->pp_done);
+ /*
+ * Enable autorefresh so we get regular ping/pong IRQs.
+ * - Bit 31 is the enable bit
+ * - Bits 0-15 represent the frame count, specifically how many
+ * TE events before the MDP sends a frame.
+ */
+ mdp5_write(mdp5_kms,
+ REG_MDP5_PP_AUTOREFRESH_CONFIG(pipeline->mixer->pp),
+ BIT(31) | BIT(0));
+ crtc_flush_all(crtc);
+ }
+
mdp5_crtc->enabled = true;
}
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c
b/drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c
index 030279d7b64b..aee295abada3 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c
@@ -187,14 +187,7 @@ static bool start_signal_needed(struct mdp5_ctl *ctl,
if (!ctl->encoder_enabled)
return false;
- switch (intf->type) {
- case INTF_WB:
- return true;
- case INTF_DSI:
- return intf->mode == MDP5_INTF_DSI_MODE_COMMAND;
- default:
- return false;
- }
+ return intf->type == INTF_WB;
}
/*
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
