Hi Claudiu
On Thu, Jan 02, 2020 at 10:08:48AM +0100, Sam Ravnborg wrote:
> On Wed, Dec 18, 2019 at 02:28:28PM +0200, Claudiu Beznea wrote:
> > From: Peter Rosin <p...@axentia.se>
> >
> > The intention was to only select a higher pixel-clock rate than the
> > requested, if a slight overclocking would result in a rate significantly
> > closer to the requested rate than if the conservative lower pixel-clock
> > rate is selected. The fixed patch has the logic the other way around and
> > actually prefers the higher frequency. Fix that.
> >
> > Fixes: f6f7ad323461 ("drm/atmel-hlcdc: allow selecting a higher pixel-clock
> > than requested")
> The id is wrong here - the right one is:
> 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de
> The wrong id above was used before - so I think it is a copy'n'paste
> thing.
>
> Hint: try "dim fixes 9946a3a9dbedaaacef8b7e94f6ac144f1daaf1de"
>
> If I get a quick response from Lee I can fix it up while applying.
>
> Sam
>
> > Reported-by: Claudiu Beznea <claudiu.bez...@microchip.com>
> > Tested-by: Claudiu Beznea <claudiu.bez...@microchip.com>
> > Signed-off-by: Peter Rosin <p...@axentia.se>
One other detail.
The patch has passed through your hands, so you have to add your s-o-b
to document this.
The chain of s-o-b shall document the path the patch has taken towards
the kernel.
In this case:
Peter => Claudiu => Sam => Applied.
Please resend or reply where you say OK that I add your s-o-b.
PS. And happy new year!
Sam
> > ---
> > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> > b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> > index 721fa88bf71d..10985134ce0b 100644
> > --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> > +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> > @@ -121,8 +121,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct
> > drm_crtc *c)
> > int div_low = prate / mode_rate;
> >
> > if (div_low >= 2 &&
> > - ((prate / div_low - mode_rate) <
> > - 10 * (mode_rate - prate / div)))
> > + (10 * (prate / div_low - mode_rate) <
> > + (mode_rate - prate / div)))
> > /*
> > * At least 10 times better when using a higher
> > * frequency than requested, instead of a lower.
> > --
> > 2.7.4
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
