Hi Andrzej,
On 16/01/2020 16.35, Andrzej Hajda wrote:
> On 17.12.2019 11:15, Peter Ujfalusi wrote:
>> Add basic support for the Toshiba TC358768 RGB to DSI bridge.
>> Not all the features of the TC358768 is implemented by the initial driver:
>> MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested.
>>
>> Only write is implemented for mipi_dsi_host_ops.transfer.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
>> ---
>> drivers/gpu/drm/bridge/Kconfig | 10 +
>> drivers/gpu/drm/bridge/Makefile | 1 +
>> drivers/gpu/drm/bridge/tc358768.c | 963 ++++++++++++++++++++++++++++++
>> 3 files changed, 974 insertions(+)
>> create mode 100644 drivers/gpu/drm/bridge/tc358768.c
>>
>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>> index ccc698c44f58..fd65666702e1 100644
>> --- a/drivers/gpu/drm/bridge/Kconfig
>> +++ b/drivers/gpu/drm/bridge/Kconfig
>> @@ -122,6 +122,16 @@ config DRM_TOSHIBA_TC358767
>> ---help---
>> Toshiba TC358767 eDP bridge chip driver.
>>
>> +config DRM_TOSHIBA_TC358768
>> + tristate "Toshiba TC358768 MIPI DSI bridge"
>> + depends on OF
>> + select DRM_KMS_HELPER
>> + select REGMAP_I2C
>> + select DRM_PANEL
>> + select DRM_MIPI_DSI
>> + help
>> + Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver.
>> +
>> config DRM_TI_TFP410
>> tristate "TI TFP410 DVI/HDMI bridge"
>> depends on OF
>> diff --git a/drivers/gpu/drm/bridge/Makefile
>> b/drivers/gpu/drm/bridge/Makefile
>> index a6c7dd7727ea..204696e30572 100644
>> --- a/drivers/gpu/drm/bridge/Makefile
>> +++ b/drivers/gpu/drm/bridge/Makefile
>> @@ -11,6 +11,7 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o
>> obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
>> obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
>> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
>> +obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
>> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
>> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
>> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
>> diff --git a/drivers/gpu/drm/bridge/tc358768.c
>> b/drivers/gpu/drm/bridge/tc358768.c
>> new file mode 100644
>> index 000000000000..63571191b1c4
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/tc358768.c
>> @@ -0,0 +1,963 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
>
>
> Just FYI, we have 2020 already, maybe update needed.
Oh, how time flies ;)
>
>
>> + * Author: Peter Ujfalusi <peter.ujfal...@ti.com>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <linux/regulator/consumer.h>
>
>
> alphabetic order
Ok.
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_drv.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +#include <video/videomode.h>
>> +
>> +/* Global (16-bit addressable) */
>> +#define TC358768_CHIPID 0x0000
>> +#define TC358768_SYSCTL 0x0002
>> +#define TC358768_CONFCTL 0x0004
>> +#define TC358768_VSDLY 0x0006
>> +#define TC358768_DATAFMT 0x0008
>> +#define TC358768_GPIOEN 0x000E
>> +#define TC358768_GPIODIR 0x0010
>> +#define TC358768_GPIOIN 0x0012
>> +#define TC358768_GPIOOUT 0x0014
>> +#define TC358768_PLLCTL0 0x0016
>> +#define TC358768_PLLCTL1 0x0018
>> +#define TC358768_CMDBYTE 0x0022
>> +#define TC358768_PP_MISC 0x0032
>> +#define TC358768_DSITX_DT 0x0050
>> +#define TC358768_FIFOSTATUS 0x00F8
>> +
>> +/* Debug (16-bit addressable) */
>> +#define TC358768_VBUFCTRL 0x00E0
>> +#define TC358768_DBG_WIDTH 0x00E2
>> +#define TC358768_DBG_VBLANK 0x00E4
>> +#define TC358768_DBG_DATA 0x00E8
>> +
>> +/* TX PHY (32-bit addressable) */
>> +#define TC358768_CLW_DPHYCONTTX 0x0100
>> +#define TC358768_D0W_DPHYCONTTX 0x0104
>> +#define TC358768_D1W_DPHYCONTTX 0x0108
>> +#define TC358768_D2W_DPHYCONTTX 0x010C
>> +#define TC358768_D3W_DPHYCONTTX 0x0110
>> +#define TC358768_CLW_CNTRL 0x0140
>> +#define TC358768_D0W_CNTRL 0x0144
>> +#define TC358768_D1W_CNTRL 0x0148
>> +#define TC358768_D2W_CNTRL 0x014C
>> +#define TC358768_D3W_CNTRL 0x0150
>> +
>> +/* TX PPI (32-bit addressable) */
>> +#define TC358768_STARTCNTRL 0x0204
>> +#define TC358768_DSITXSTATUS 0x0208
>> +#define TC358768_LINEINITCNT 0x0210
>> +#define TC358768_LPTXTIMECNT 0x0214
>> +#define TC358768_TCLK_HEADERCNT 0x0218
>> +#define TC358768_TCLK_TRAILCNT 0x021C
>> +#define TC358768_THS_HEADERCNT 0x0220
>> +#define TC358768_TWAKEUP 0x0224
>> +#define TC358768_TCLK_POSTCNT 0x0228
>> +#define TC358768_THS_TRAILCNT 0x022C
>> +#define TC358768_HSTXVREGCNT 0x0230
>> +#define TC358768_HSTXVREGEN 0x0234
>> +#define TC358768_TXOPTIONCNTRL 0x0238
>> +#define TC358768_BTACNTRL1 0x023C
>> +
>> +/* TX CTRL (32-bit addressable) */
>> +#define TC358768_DSI_CONTROL 0x040C
>> +#define TC358768_DSI_STATUS 0x0410
>> +#define TC358768_DSI_INT 0x0414
>> +#define TC358768_DSI_INT_ENA 0x0418
>> +#define TC358768_DSICMD_RDFIFO 0x0430
>> +#define TC358768_DSI_ACKERR 0x0434
>> +#define TC358768_DSI_ACKERR_INTENA 0x0438
>> +#define TC358768_DSI_ACKERR_HALT 0x043c
>> +#define TC358768_DSI_RXERR 0x0440
>> +#define TC358768_DSI_RXERR_INTENA 0x0444
>> +#define TC358768_DSI_RXERR_HALT 0x0448
>> +#define TC358768_DSI_ERR 0x044C
>> +#define TC358768_DSI_ERR_INTENA 0x0450
>> +#define TC358768_DSI_ERR_HALT 0x0454
>> +#define TC358768_DSI_CONFW 0x0500
>> +#define TC358768_DSI_LPCMD 0x0500
>> +#define TC358768_DSI_RESET 0x0504
>> +#define TC358768_DSI_INT_CLR 0x050C
>> +#define TC358768_DSI_START 0x0518
>> +
>> +/* DSITX CTRL (16-bit addressable) */
>> +#define TC358768_DSICMD_TX 0x0600
>> +#define TC358768_DSICMD_TYPE 0x0602
>> +#define TC358768_DSICMD_WC 0x0604
>> +#define TC358768_DSICMD_WD0 0x0610
>> +#define TC358768_DSICMD_WD1 0x0612
>> +#define TC358768_DSICMD_WD2 0x0614
>> +#define TC358768_DSICMD_WD3 0x0616
>> +#define TC358768_DSI_EVENT 0x0620
>> +#define TC358768_DSI_VSW 0x0622
>> +#define TC358768_DSI_VBPR 0x0624
>> +#define TC358768_DSI_VACT 0x0626
>> +#define TC358768_DSI_HSW 0x0628
>> +#define TC358768_DSI_HBPR 0x062A
>> +#define TC358768_DSI_HACT 0x062C
>> +
>> +static const char * const tc358768_supplies[] = {
>> + "vddc", "vddmipi", "vddio"
>> +};
>> +
>> +struct tc358768_dsi_output {
>> + struct mipi_dsi_device *dev;
>> + struct drm_panel *panel;
>> + struct drm_bridge *bridge;
>> +};
>> +
>> +struct tc358768_priv {
>> + struct device *dev;
>> + struct regmap *regmap;
>> + struct gpio_desc *reset_gpio;
>> + struct regulator_bulk_data supplies[ARRAY_SIZE(tc358768_supplies)];
>> + struct clk *refclk;
>> +
>> + struct mipi_dsi_host dsi_host;
>> + struct drm_bridge bridge;
>> + struct tc358768_dsi_output output;
>
>
> Since tc358768_dsi_output is used only here, you can define it here as
> well, up to you.
I think I have done it like this to avoid thinking about prefixes for
what is under the tc358768_dsi_output.
I'll take a look if it will look better unpacked here.
>> +
>> + const struct drm_display_mode *mode;
>> + u32 pd_lines; /* number of Parallel Port Input Data Lines */
>> + u32 dsi_lanes; /* number of DSI Lanes */
>> +
>> + u32 fbd;
>> + u32 prd;
>> + u32 frs;
>
>
> Looks ugly, please rename these 3 vars to sth more readable, or at least
> document them (if the names comes from the specification).
Sure, I agree.
>
>> +
>> + u32 dsiclk; /* pll_clk / 2 */
>> +};
>> +
>> +static inline struct tc358768_priv *dsi_host_to_tc358768(struct
>> mipi_dsi_host
>> + *host)
>> +{
>> + return container_of(host, struct tc358768_priv, dsi_host);
>> +}
>> +
>> +static inline struct tc358768_priv *bridge_to_tc358768(struct drm_bridge
>> + *bridge)
>> +{
>> + return container_of(bridge, struct tc358768_priv, bridge);
>> +}
>> +
>> +static int tc358768_write(struct tc358768_priv *priv, u32 reg, u32 val)
>> +{
>> + size_t count = 2;
>> +
>> + /* 16-bit register? */
>> + if (reg < 0x100 || reg >= 0x600)
>> + count = 1;
>> +
>> + return regmap_bulk_write(priv->regmap, reg, &val, count);
>> +}
>> +
>> +static int tc358768_read(struct tc358768_priv *priv, u32 reg, u32 *val)
>> +{
>> + size_t count = 2;
>> +
>> + /* 16-bit register? */
>> + if (reg < 0x100 || reg >= 0x600) {
>> + *val = 0;
>> + count = 1;
>> + }
>> +
>> + return regmap_bulk_read(priv->regmap, reg, val, count);
>> +}
>> +
>> +static int tc358768_update_bits(struct tc358768_priv *priv, u32 reg, u32
>> mask,
>> + u32 val)
>> +{
>> + int ret;
>> + u32 tmp, orig;
>> +
>> + ret = tc358768_read(priv, reg, &orig);
>> + if (ret != 0)
>> + return ret;
>> +
>> + tmp = orig & ~mask;
>> + tmp |= val & mask;
>> +
>> + if (tmp != orig)
>> + ret = tc358768_write(priv, reg, tmp);
>> +
>> + return ret;
>> +}
>
>
> You have defined 3 hw access functions which can fail but you do not
> check their return values in later usage. Does regmap/i2c logs sth in
> case of error?
>
> If not, maybe error logging should be added at least in these accessors.
>
> The best would be to propagate errors to callers, either traditional way
> (add check after each call), either you can use 'error state' pattern,
> which I recommend (see for example to 'ctx->error' usage in sil-sii8620.c).
OK, I'll clean this up
>> +
>> +static void tc358768_sw_reset(struct tc358768_priv *priv)
>> +{
>> + /* Assert Reset */
>> + tc358768_write(priv, TC358768_SYSCTL, 1);
>> + /* Release Reset, Exit Sleep */
>> + tc358768_write(priv, TC358768_SYSCTL, 0);
>> +}
>> +
>> +static void tc358768_hw_enable(struct tc358768_priv *priv, bool enable)
>> +{
>> + int ret;
>> +
>> + if (enable) {
>> + ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies),
>> + priv->supplies);
>> + if (ret < 0)
>> + dev_err(priv->dev, "error enabling regulators (%d)\n",
>> + ret);
>> + usleep_range(200, 300);
>> + }
>> +
>> + /*
>> + * The RESX is active low (GPIO_ACTIVE_LOW).
>> + * Invert the 'enable' value to get correct assertion for the gpio:
>> + * enable == true: reset_gpio needs to be DEASSERTED (value = 0)
>> + * enable == false: reset_gpio needs to be ASSERTED (value = 1)
>> + */
>> + gpiod_set_value_cansleep(priv->reset_gpio, !enable);
>> +
>> + regcache_cache_only(priv->regmap, !enable);
>> + if (enable) {
>> + /* wait for encoder clocks to stabilize */
>> + usleep_range(1000, 2000);
>> +
>> + regcache_sync(priv->regmap);
>
>
> What do you need to sync here?
Right, we do a full reconfiguration after this, you are correct, there
is no need to sync and the regmap's REGCACHE_RBTREE can be REGCACHE_NONE
safely.
>
>> + } else {
>> + ret = regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
>> + priv->supplies);
>> + if (ret < 0)
>> + dev_err(priv->dev, "error disabling regulators (%d)\n",
>> + ret);
>> + }
>> +}
>
>
> Above function looks ugly - these 'if (enable)' and similar are hard to
> read, maybe two separate hw_enable, hw_disable function would look
> better, more readable, up to you.
OK, I'll separate the enable and disable.
>
>> +
>> +static u32 tc358768_pll_to_pclk(struct tc358768_priv *priv, u32 pll_clk)
>> +{
>> + return (u32)div_u64((u64)pll_clk * priv->dsi_lanes, priv->pd_lines);
>> +}
>> +
>> +static u32 tc358768_pclk_to_pll(struct tc358768_priv *priv, u32 pclk)
>> +{
>> + return (u32)div_u64((u64)pclk * priv->pd_lines, priv->dsi_lanes);
>> +}
>> +
>> +static int tc358768_calc_pll(struct tc358768_priv *priv)
>> +{
>> + const u32 frs_limits[] = {
>> + 1000000000,
>> + 500000000,
>> + 250000000,
>> + 125000000,
>> + 62500000
>> + };
>> + unsigned long refclk;
>> + u32 prd, target_pll, i, max_pll, min_pll;
>> + u32 frs, best_diff, best_pll, best_prd, best_fbd;
>> +
>> + target_pll = tc358768_pclk_to_pll(priv, priv->mode->clock * 1000);
>> +
>> + /* pll_clk = RefClk * [(FBD + 1)/ (PRD + 1)] * [1 / (2^FRS)] */
>> +
> I guess below code:
>> + frs = UINT_MAX;
>> +
>> + for (i = 0; i < ARRAY_SIZE(frs_limits) - 1; i++) {
>> + if (target_pll < frs_limits[i] &&
>> + target_pll >= frs_limits[i + 1]) {
>> + frs = i;
>> + max_pll = frs_limits[i];
>> + min_pll = frs_limits[i + 1];
>> + break;
>> + }
>> + }
>> +
>> + if (frs == UINT_MAX)
>> + return -EINVAL;
>
>
> can be simplified:
>
> for (i = 0; i < ARRAY_SIZE(frs_limits); i++)
>
> if (target_pll >= frs_limits[i])
>
> break;
>
> if (i == ARRAY_SIZE(frs_limits) || i == 0)
>
> return -EINVAL;
>
> frs = i - 1;
>
> max_pll = frs_limits[i-1];
>
> min_pll = frs_limits[i];
Yes, it enhances readability as well.
>
>> +
>> + refclk = clk_get_rate(priv->refclk);
>> +
>> + best_diff = UINT_MAX;
>> + best_pll = 0;
>> + best_prd = 0;
>> + best_fbd = 0;
>> +
>> + for (prd = 0; prd < 16; ++prd) {
>> + u32 divisor = (prd + 1) * (1 << frs);
>> + u32 fbd;
>> +
>> + for (fbd = 0; fbd < 512; ++fbd) {
>> + u32 pll, diff;
>> +
>> + pll = (u32)div_u64((u64)refclk * (fbd + 1), divisor);
>> +
>> + if (pll >= max_pll || pll < min_pll)
>> + continue;
>> +
>> + diff = max(pll, target_pll) - min(pll, target_pll);
>> +
>> + if (diff < best_diff) {
>> + best_diff = diff;
>> + best_pll = pll;
>> + best_prd = prd;
>> + best_fbd = fbd;
>> + }
>> +
>> + if (best_diff == 0)
>> + break;
>> + }
>> +
>> + if (best_diff == 0)
>> + break;
> why another check here?
To break out from the top for() loop also in case exact match has been
found.
>> + }
>> +
>> + if (best_diff == UINT_MAX) {
>> + dev_err(priv->dev, "could not find suitable PLL setup\n");
>> + return -EINVAL;
>> + }
>> +
>> + priv->fbd = best_fbd;
>> + priv->prd = best_prd;
>> + priv->frs = frs;
>> + priv->dsiclk = best_pll / 2;
>> +
>> + return 0;
>> +}
>> +
>> +static int tc358768_dsi_host_attach(struct mipi_dsi_host *host,
>> + struct mipi_dsi_device *dev)
>> +{
>> + struct tc358768_priv *priv = dsi_host_to_tc358768(host);
>> + struct drm_bridge *bridge;
>> + struct drm_panel *panel;
>> + struct device_node *ep;
>> + int ret;
>> +
>> + if (dev->lanes > 4) {
>> + dev_err(priv->dev, "unsupported number of data lanes(%u)\n",
>> + dev->lanes);
>> + return -EINVAL;
>> + }
>> +
>> + /*
>> + * tc358768 supports both Video and Pulse mode, but the driver only
>> + * implements Video (event) mode currently
>> + */
>> + if (!(dev->mode_flags & MIPI_DSI_MODE_VIDEO)) {
>> + dev_err(priv->dev, "Only MIPI_DSI_MODE_VIDEO is supported\n");
>> + return -ENOTSUPP;
>> + }
>> +
>> + /*
>> + * tc358768 supports RGB888, RGB666, RGB666_PACKED and RGB565, but only
>> + * RGB888 is verified.
>> + */
>> + if (dev->format != MIPI_DSI_FMT_RGB888) {
>> + dev_warn(priv->dev, "Only MIPI_DSI_FMT_RGB888 tested!\n");
>> + return -ENOTSUPP;
>> + }
>> +
>> + ret = drm_of_find_panel_or_bridge(host->dev->of_node, 1, 0, &panel,
>> + &bridge);
>> + if (ret)
>> + return ret;
>> +
>> + if (panel) {
>> + bridge = drm_panel_bridge_add_typed(panel,
>> + DRM_MODE_CONNECTOR_DSI);
>> + if (IS_ERR(bridge))
>> + return PTR_ERR(bridge);
>> + }
>> +
>> + priv->output.dev = dev;
>> + priv->output.bridge = bridge;
>> + priv->output.panel = panel;
>> +
>> + priv->dsi_lanes = dev->lanes;
>> +
>> + /* get input ep (port0/endpoint0) */
>> + ret = -EINVAL;
>> + ep = of_graph_get_endpoint_by_regs(host->dev->of_node, 0, 0);
>> + if (ep) {
>> + ret = of_property_read_u32(ep, "data-lines", &priv->pd_lines);
>> +
>> + of_node_put(ep);
>> + }
>> +
>> + if (ret)
>> + priv->pd_lines = mipi_dsi_pixel_format_to_bpp(dev->format);
>> +
>> + drm_bridge_add(&priv->bridge);
>> +
>> + return 0;
>> +}
>> +
>> +static int tc358768_dsi_host_detach(struct mipi_dsi_host *host,
>> + struct mipi_dsi_device *dev)
>> +{
>> + struct tc358768_priv *priv = dsi_host_to_tc358768(host);
>> +
>> + drm_bridge_remove(&priv->bridge);
>> + if (priv->output.panel)
>> + drm_panel_bridge_remove(priv->output.bridge);
>> +
>> + return 0;
>> +}
>> +
>> +static ssize_t tc358768_dsi_host_transfer(struct mipi_dsi_host *host,
>> + const struct mipi_dsi_msg *msg)
>> +{
>> + struct tc358768_priv *priv = dsi_host_to_tc358768(host);
>> + struct mipi_dsi_packet packet;
>> + int ret;
>> +
>> + if (msg->rx_len) {
>> + dev_warn(priv->dev, "MIPI rx is not supported\n");
>> + return -ENOTSUPP;
>> + }
>> +
>> + if (msg->tx_len > 8) {
>> + dev_warn(priv->dev, "Maximum 8 byte MIPI tx is supported\n");
>> + return -ENOTSUPP;
>> + }
>> +
>> + ret = mipi_dsi_create_packet(&packet, msg);
>> + if (ret)
>> + return ret;
>> +
>> + tc358768_hw_enable(priv, true);
>> +
>> + if (mipi_dsi_packet_format_is_short(msg->type)) {
>> + tc358768_write(priv, TC358768_DSICMD_TYPE,
>> + (0x10 << 8) | (packet.header[0] & 0x3f));
>> + tc358768_write(priv, TC358768_DSICMD_WC, 0);
>> + tc358768_write(priv, TC358768_DSICMD_WD0,
>> + (packet.header[2] << 8) | packet.header[1]);
>> + } else {
>> + int i, j;
>> +
>> + tc358768_write(priv, TC358768_DSICMD_TYPE,
>> + (0x40 << 8) | (packet.header[0] & 0x3f));
>> + tc358768_write(priv, TC358768_DSICMD_WC, packet.payload_length);
>> + for (i = 0; i < packet.payload_length; i += 2) {
>> + u16 val = 0;
>> +
>> + for (j = 0; j < 2 && i + j < packet.payload_length; j++)
>> + val |= packet.payload[i + j] << (8 * j);
>> +
>
>
> Quite clever, but barely readable, maybe:
>
> u16 val = packet.payload[i];
>
> if (i + 1 < packet.payload_length)
>
> val |= packet.payload[i + 1] << 8;
yes, looks simpler.
>
>
>> + tc358768_write(priv, TC358768_DSICMD_WD0 + i, val);
>> + }
>> + }
>> +
>> + /* start transfer */
>> + tc358768_write(priv, TC358768_DSICMD_TX, 1);
>> +
>> + tc358768_hw_enable(priv, false);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct mipi_dsi_host_ops tc358768_dsi_host_ops = {
>> + .attach = tc358768_dsi_host_attach,
>> + .detach = tc358768_dsi_host_detach,
>> + .transfer = tc358768_dsi_host_transfer,
>> +};
>> +
>> +static int tc358768_bridge_attach(struct drm_bridge *bridge)
>> +{
>> + struct tc358768_priv *priv = bridge_to_tc358768(bridge);
>> +
>> + if (!drm_core_check_feature(bridge->dev, DRIVER_ATOMIC)) {
>> + dev_err(priv->dev, "needs atomic updates support\n");
>> + return -ENOTSUPP;
>> + }
>> +
>> + return drm_bridge_attach(bridge->encoder, priv->output.bridge, bridge);
>> +}
>> +
>> +static enum drm_mode_status
>> +tc358768_bridge_mode_valid(struct drm_bridge *bridge,
>> + const struct drm_display_mode *mode)
>> +{
>> + struct tc358768_priv *priv = bridge_to_tc358768(bridge);
>> +
>> + priv->mode = mode;
>
>
> This is dangerous, you should assume mode pointer provided in this
> callback is valid only till end of function.
>
> If you need mode later you can use this ugly pointer:
>
> priv->bridge.encoder->crtc->state->adjusted_mode
>
> or alternatively copy mode to priv (also ugly, but at least no dangling
> pointers).
OK, I'll see how it can be reworked.
>
>
>
>> +
>> + if (tc358768_calc_pll(priv))
>> + return MODE_CLOCK_RANGE;
>
> tc358768_calc_pll modifies state, mode_valid callback shouldn't do it.
>
>
> Regards
>
> Andrzej
Thank you for the review,
- Péter
>> +
>> + return MODE_OK;
>> +}
>> +
>> +static void tc358768_bridge_disable(struct drm_bridge *bridge)
>> +{
>> + struct tc358768_priv *priv = bridge_to_tc358768(bridge);
>> +
>> + /* set FrmStop */
>> + tc358768_update_bits(priv, TC358768_PP_MISC, BIT(15), BIT(15));
>> +
>> + /* wait at least for one frame */
>> + msleep(50);
>> +
>> + /* clear PP_en */
>> + tc358768_update_bits(priv, TC358768_CONFCTL, BIT(6), 0);
>> +
>> + /* set RstPtr */
>> + tc358768_update_bits(priv, TC358768_PP_MISC, BIT(14), BIT(14));
>> +
>> + tc358768_hw_enable(priv, false);
>> +}
>> +
>> +static void tc358768_setup_pll(struct tc358768_priv *priv)
>> +{
>> + u32 fbd, prd, frs;
>> +
>> + fbd = priv->fbd;
>> + prd = priv->prd;
>> + frs = priv->frs;
>> +
>> + dev_dbg(priv->dev, "PLL: refclk %lu, fbd %u, prd %u, frs %u\n",
>> + clk_get_rate(priv->refclk), fbd, prd, frs);
>> + dev_dbg(priv->dev, "PLL: pll_clk: %u, DSIClk %u, DSIByteClk %u\n",
>> + priv->dsiclk * 2, priv->dsiclk, priv->dsiclk / 4);
>> + dev_dbg(priv->dev, "PLL: pclk %u (panel: %u)\n",
>> + tc358768_pll_to_pclk(priv, priv->dsiclk * 2),
>> + priv->mode->clock * 1000);
>> +
>> + /* PRD[15:12] FBD[8:0] */
>> + tc358768_write(priv, TC358768_PLLCTL0, (prd << 12) | fbd);
>> +
>> + /* FRS[11:10] LBWS[9:8] CKEN[4] RESETB[1] EN[0] */
>> + tc358768_write(priv, TC358768_PLLCTL1,
>> + (frs << 10) | (0x2 << 8) | BIT(1) | BIT(0));
>> +
>> + /* wait for lock */
>> + usleep_range(1000, 2000);
>> +
>> + /* FRS[11:10] LBWS[9:8] CKEN[4] PLL_CKEN[4] RESETB[1] EN[0] */
>> + tc358768_write(priv, TC358768_PLLCTL1,
>> + (frs << 10) | (0x2 << 8) | BIT(4) | BIT(1) | BIT(0));
>> +}
>> +
>> +#define TC358768_PRECISION 1000
>> +static u32 tc358768_ns_to_cnt(u32 ns, u32 period_nsk)
>> +{
>> + return (ns * TC358768_PRECISION + period_nsk) / period_nsk;
>> +}
>> +
>> +static u32 tc358768_to_ns(u32 nsk)
>> +{
>> + return (nsk / TC358768_PRECISION);
>> +}
>> +
>> +static void tc358768_bridge_enable(struct drm_bridge *bridge)
>> +{
>> + struct tc358768_priv *priv = bridge_to_tc358768(bridge);
>> + const struct drm_display_mode *mode = priv->mode;
>> + struct mipi_dsi_device *dsi_dev = priv->output.dev;
>> + u32 val, val2, lptxcnt, hact, data_type;
>> + u32 dsiclk = priv->dsiclk;
>> + u32 dsibclk = dsiclk / 4;
>> + u32 dsibclk_nsk, dsiclk_nsk, ui_nsk, phy_delay_nsk;
>> + int i;
>> +
>> + tc358768_hw_enable(priv, true);
>> +
>> + tc358768_sw_reset(priv);
>> +
>> + tc358768_setup_pll(priv);
>> +
>> + /* VSDly[9:0] */
>> + tc358768_write(priv, TC358768_VSDLY, 1);
>> +
>> + /* Data Format Control Register */
>> + val = BIT(2) | BIT(1) | BIT(0); /* rdswap_en | dsitx_en | txdt_en */
>> + switch (dsi_dev->format) {
>> + case MIPI_DSI_FMT_RGB888:
>> + val |= (0x3 << 4);
>> + hact = mode->hdisplay * 3;
>> + data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
>> + break;
>> + case MIPI_DSI_FMT_RGB666:
>> + val |= (0x4 << 4);
>> + hact = mode->hdisplay * 3;
>> + data_type = MIPI_DSI_PACKED_PIXEL_STREAM_18;
>> + break;
>> +
>> + case MIPI_DSI_FMT_RGB666_PACKED:
>> + val |= (0x4 << 4) | BIT(3);
>> + hact = mode->hdisplay * 18 / 8;
>> + data_type = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
>> + break;
>> +
>> + case MIPI_DSI_FMT_RGB565:
>> + val |= (0x5 << 4);
>> + hact = mode->hdisplay * 2;
>> + data_type = MIPI_DSI_PACKED_PIXEL_STREAM_16;
>> + break;
>> + default:
>> + dev_err(priv->dev, "Invalid data format (%u)\n",
>> + dsi_dev->format);
>> + return;
>> + }
>> +
>> + tc358768_write(priv, TC358768_DATAFMT, val);
>> + tc358768_write(priv, TC358768_DSITX_DT, data_type);
>> +
>> + /* Enable D-PHY (HiZ->LP11) */
>> + tc358768_write(priv, TC358768_CLW_CNTRL, 0x0000);
>> + /* Enable lanes */
>> + for (i = 0; i < dsi_dev->lanes; i++)
>> + tc358768_write(priv, TC358768_D0W_CNTRL + i * 4, 0x0000);
>> +
>> + /* DSI Timings */
>> + dsibclk_nsk = (u32)div_u64((u64)1000000000 * TC358768_PRECISION,
>> + dsibclk);
>> + dsiclk_nsk = (u32)div_u64((u64)1000000000 * TC358768_PRECISION, dsiclk);
>> + ui_nsk = dsiclk_nsk / 2;
>> + phy_delay_nsk = dsibclk_nsk + 2 * dsiclk_nsk;
>> + dev_dbg(priv->dev, "dsiclk_nsk: %u\n", dsiclk_nsk);
>> + dev_dbg(priv->dev, "ui_nsk: %u\n", ui_nsk);
>> + dev_dbg(priv->dev, "dsibclk_nsk: %u\n", dsibclk_nsk);
>> + dev_dbg(priv->dev, "phy_delay_nsk: %u\n", phy_delay_nsk);
>> +
>> + /* LP11 > 100us for D-PHY Rx Init */
>> + val = tc358768_ns_to_cnt(100 * 1000, dsibclk_nsk) - 1;
>> + dev_dbg(priv->dev, "LINEINITCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_LINEINITCNT, val);
>> +
>> + /* LPTimeCnt > 50ns */
>> + val = tc358768_ns_to_cnt(50, dsibclk_nsk) - 1;
>> + lptxcnt = val;
>> + dev_dbg(priv->dev, "LPTXTIMECNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_LPTXTIMECNT, val);
>> +
>> + /* 38ns < TCLK_PREPARE < 95ns */
>> + val = tc358768_ns_to_cnt(65, dsibclk_nsk) - 1;
>> + /* TCLK_PREPARE > 300ns */
>> + val2 = tc358768_ns_to_cnt(300 + tc358768_to_ns(3 * ui_nsk),
>> + dsibclk_nsk);
>> + val |= (val2 - tc358768_to_ns(phy_delay_nsk - dsibclk_nsk)) << 8;
>> + dev_dbg(priv->dev, "TCLK_HEADERCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_TCLK_HEADERCNT, val);
>> +
>> + /* TCLK_TRAIL > 60ns + 3*UI */
>> + val = 60 + tc358768_to_ns(3 * ui_nsk);
>> + val = tc358768_ns_to_cnt(val, dsibclk_nsk) - 5;
>> + dev_dbg(priv->dev, "TCLK_TRAILCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_TCLK_TRAILCNT, val);
>> +
>> + /* 40ns + 4*UI < THS_PREPARE < 85ns + 6*UI */
>> + val = 50 + tc358768_to_ns(4 * ui_nsk);
>> + val = tc358768_ns_to_cnt(val, dsibclk_nsk) - 1;
>> + /* THS_ZERO > 145ns + 10*UI */
>> + val2 = tc358768_ns_to_cnt(145 - tc358768_to_ns(ui_nsk), dsibclk_nsk);
>> + val |= (val2 - tc358768_to_ns(phy_delay_nsk)) << 8;
>> + dev_dbg(priv->dev, "THS_HEADERCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_THS_HEADERCNT, val);
>> +
>> + /* TWAKEUP > 1ms in lptxcnt steps */
>> + val = tc358768_ns_to_cnt(1020000, dsibclk_nsk);
>> + val = val / (lptxcnt + 1) - 1;
>> + dev_dbg(priv->dev, "TWAKEUP: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_TWAKEUP, val);
>> +
>> + /* TCLK_POSTCNT > 60ns + 52*UI */
>> + val = tc358768_ns_to_cnt(60 + tc358768_to_ns(52 * ui_nsk),
>> + dsibclk_nsk) - 3;
>> + dev_dbg(priv->dev, "TCLK_POSTCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_TCLK_POSTCNT, val);
>> +
>> + /* 60ns + 4*UI < THS_PREPARE < 105ns + 12*UI */
>> + val = tc358768_ns_to_cnt(60 + tc358768_to_ns(15 * ui_nsk),
>> + dsibclk_nsk) - 5;
>> + dev_dbg(priv->dev, "THS_TRAILCNT: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_THS_TRAILCNT, val);
>> +
>> + val = BIT(0);
>> + for (i = 0; i < dsi_dev->lanes; i++)
>> + val |= BIT(i + 1);
>> + tc358768_write(priv, TC358768_HSTXVREGEN, val);
>> +
>> + if (!(dsi_dev->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
>> + tc358768_write(priv, TC358768_TXOPTIONCNTRL, 0x1);
>> +
>> + /* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
>> + val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
>> + val = tc358768_ns_to_cnt(val, dsibclk_nsk) - 1;
>> + val2 = tc358768_ns_to_cnt(tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk),
>> + dsibclk_nsk) - 2;
>> + val |= val2 << 16;
>> + dev_dbg(priv->dev, "BTACNTRL1: 0x%x\n", val);
>> + tc358768_write(priv, TC358768_BTACNTRL1, val);
>> +
>> + /* START[0] */
>> + tc358768_write(priv, TC358768_STARTCNTRL, 1);
>> +
>> + /* Set event mode */
>> + tc358768_write(priv, TC358768_DSI_EVENT, 1);
>> +
>> + /* vsw (+ vbp) */
>> + tc358768_write(priv, TC358768_DSI_VSW,
>> + mode->vtotal - mode->vsync_start);
>> + /* vbp (not used in event mode) */
>> + tc358768_write(priv, TC358768_DSI_VBPR, 0);
>> + /* vact */
>> + tc358768_write(priv, TC358768_DSI_VACT, mode->vdisplay);
>> +
>> + /* (hsw + hbp) * byteclk * ndl / pclk */
>> + val = (u32)div_u64((mode->htotal - mode->hsync_start) *
>> + ((u64)priv->dsiclk / 4) * priv->dsi_lanes,
>> + mode->clock * 1000);
>> + tc358768_write(priv, TC358768_DSI_HSW, val);
>> + /* hbp (not used in event mode) */
>> + tc358768_write(priv, TC358768_DSI_HBPR, 0);
>> + /* hact (bytes) */
>> + tc358768_write(priv, TC358768_DSI_HACT, hact);
>> +
>> + /* VSYNC polarity */
>> + if (!(mode->flags & DRM_MODE_FLAG_NVSYNC))
>> + tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5), BIT(5));
>> + /* HSYNC polarity */
>> + if (mode->flags & DRM_MODE_FLAG_PHSYNC)
>> + tc358768_update_bits(priv, TC358768_PP_MISC, BIT(0), BIT(0));
>> +
>> + /* Start DSI Tx */
>> + tc358768_write(priv, TC358768_DSI_START, 0x1);
>> +
>> + /* Configure DSI_Control register */
>> + val = (6 << 29) | (0x3 << 24); /* CLEAR, DSI_Control */
>> + val |= BIT(7) | BIT(5) | 0x3 << 1 | BIT(0);
>> + tc358768_write(priv, TC358768_DSI_CONFW, val);
>> +
>> + val = (5 << 29) | (0x3 << 24); /* SET, DSI_Control */
>> + if (!(dsi_dev->mode_flags & MIPI_DSI_MODE_LPM))
>> + val |= BIT(7);
>> + if (!(dsi_dev->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
>> + val |= BIT(5);
>> + val |= (dsi_dev->lanes - 1) << 1;
>> + if (dsi_dev->mode_flags & MIPI_DSI_MODE_EOT_PACKET)
>> + val |= BIT(0);
>> + tc358768_write(priv, TC358768_DSI_CONFW, val);
>> +
>> + val = (6 << 29) | (0x3 << 24); /* CLEAR, DSI_Control */
>> + val |= 0x8000; /* DSI mode */
>> + tc358768_write(priv, TC358768_DSI_CONFW, val);
>> +
>> + /* clear FrmStop and RstPtr */
>> + tc358768_update_bits(priv, TC358768_PP_MISC, 0x3 << 14, 0);
>> +
>> + /* set PP_en */
>> + tc358768_update_bits(priv, TC358768_CONFCTL, BIT(6), BIT(6));
>> +}
>> +
>> +static const struct drm_bridge_funcs tc358768_bridge_funcs = {
>> + .attach = tc358768_bridge_attach,
>> + .mode_valid = tc358768_bridge_mode_valid,
>> + .disable = tc358768_bridge_disable,
>> + .enable = tc358768_bridge_enable,
>> +};
>> +
>> +static const struct drm_bridge_timings default_tc358768_timings = {
>> + .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
>> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
>> + | DRM_BUS_FLAG_DE_HIGH,
>> +};
>> +
>> +static bool tc358768_is_reserved_reg(unsigned int reg)
>> +{
>> + switch (reg) {
>> + case 0x114 ... 0x13f:
>> + case 0x200:
>> + case 0x20c:
>> + case 0x400 ... 0x408:
>> + case 0x41c ... 0x42f:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static bool tc358768_writeable_reg(struct device *dev, unsigned int reg)
>> +{
>> + if (tc358768_is_reserved_reg(reg))
>> + return false;
>> +
>> + switch (reg) {
>> + case TC358768_CHIPID:
>> + case TC358768_FIFOSTATUS:
>> + case TC358768_DSITXSTATUS ... (TC358768_DSITXSTATUS + 2):
>> + case TC358768_DSI_CONTROL ... (TC358768_DSI_INT_ENA + 2):
>> + case TC358768_DSICMD_RDFIFO ... (TC358768_DSI_ERR_HALT + 2):
>> + return false;
>> + default:
>> + return true;
>> + }
>> +}
>> +
>> +static bool tc358768_readable_reg(struct device *dev, unsigned int reg)
>> +{
>> + if (tc358768_is_reserved_reg(reg))
>> + return false;
>> +
>> + switch (reg) {
>> + case TC358768_STARTCNTRL:
>> + case TC358768_DSI_CONFW ... (TC358768_DSI_CONFW + 2):
>> + case TC358768_DSI_INT_CLR ... (TC358768_DSI_INT_CLR + 2):
>> + case TC358768_DSI_START ... (TC358768_DSI_START + 2):
>> + case TC358768_DBG_DATA:
>> + return false;
>> + default:
>> + return true;
>> + }
>> +}
>> +
>> +static bool tc358768_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case TC358768_FIFOSTATUS:
>> + case TC358768_STARTCNTRL ... (TC358768_DSITXSTATUS + 2):
>> + case TC358768_DSI_CONTROL ... (TC358768_DSI_INT_ENA + 2):
>> + case TC358768_DSICMD_RDFIFO ... (TC358768_DSI_ERR_HALT + 2):
>> + case TC358768_DSICMD_TX:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static const struct regmap_config tc358768_regmap_config = {
>> + .name = "tc358768",
>> + .reg_bits = 16,
>> + .val_bits = 16,
>> + .max_register = TC358768_DSI_HACT,
>> + .cache_type = REGCACHE_RBTREE,
>> + .writeable_reg = tc358768_writeable_reg,
>> + .readable_reg = tc358768_readable_reg,
>> + .volatile_reg = tc358768_volatile_reg,
>> + .reg_format_endian = REGMAP_ENDIAN_BIG,
>> + .val_format_endian = REGMAP_ENDIAN_BIG,
>> +};
>> +
>> +static const struct i2c_device_id tc358768_i2c_ids[] = {
>> + { "tc358768", 0 },
>> + { "tc358778", 0 },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, tc358768_i2c_ids);
>> +
>> +static const struct of_device_id tc358768_of_ids[] = {
>> + { .compatible = "toshiba,tc358768", },
>> + { .compatible = "toshiba,tc358778", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, tc358768_of_ids);
>> +
>> +static int tc358768_get_regulators(struct tc358768_priv *priv)
>> +{
>> + int i, ret;
>> +
>> + for (i = 0; i < ARRAY_SIZE(priv->supplies); ++i)
>> + priv->supplies[i].supply = tc358768_supplies[i];
>> +
>> + ret = devm_regulator_bulk_get(priv->dev, ARRAY_SIZE(priv->supplies),
>> + priv->supplies);
>> + if (ret < 0)
>> + dev_err(priv->dev, "failed to get regulators: %d\n", ret);
>> +
>> + return ret;
>> +}
>> +
>> +static int tc358768_i2c_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct tc358768_priv *priv;
>> + struct device *dev = &client->dev;
>> + struct device_node *np = dev->of_node;
>> + int ret;
>> +
>> + if (!np)
>> + return -ENODEV;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + dev_set_drvdata(dev, priv);
>> + priv->dev = dev;
>> +
>> + ret = tc358768_get_regulators(priv);
>> + if (ret)
>> + return ret;
>> +
>> + priv->refclk = devm_clk_get(dev, "refclk");
>> + if (IS_ERR(priv->refclk))
>> + return PTR_ERR(priv->refclk);
>> +
>> + /*
>> + * RESX is low active, to disable tc358768 initially (keep in reset)
>> + * the gpio line must be LOW. This is the ASSERTED state of
>> + * GPIO_ACTIVE_LOW (GPIOD_OUT_HIGH == ASSERTED).
>> + */
>> + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(priv->reset_gpio))
>> + return PTR_ERR(priv->reset_gpio);
>> +
>> + priv->regmap = devm_regmap_init_i2c(client, &tc358768_regmap_config);
>> + if (IS_ERR(priv->regmap)) {
>> + dev_err(dev, "Failed to init regmap\n");
>> + return PTR_ERR(priv->regmap);
>> + }
>> +
>> + if (priv->reset_gpio)
>> + regcache_cache_only(priv->regmap, true);
>> +
>> + priv->dsi_host.dev = dev;
>> + priv->dsi_host.ops = &tc358768_dsi_host_ops;
>> +
>> + priv->bridge.funcs = &tc358768_bridge_funcs;
>> + priv->bridge.timings = &default_tc358768_timings;
>> + priv->bridge.of_node = np;
>> +
>> + i2c_set_clientdata(client, priv);
>> +
>> + ret = mipi_dsi_host_register(&priv->dsi_host);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int tc358768_i2c_remove(struct i2c_client *client)
>> +{
>> + struct tc358768_priv *priv = i2c_get_clientdata(client);
>> +
>> + mipi_dsi_host_unregister(&priv->dsi_host);
>> +
>> + return 0;
>> +}
>> +
>> +static struct i2c_driver tc358768_driver = {
>> + .driver = {
>> + .name = "tc358768",
>> + .of_match_table = tc358768_of_ids,
>> + },
>> + .id_table = tc358768_i2c_ids,
>> + .probe = tc358768_i2c_probe,
>> + .remove = tc358768_i2c_remove,
>> +};
>> +module_i2c_driver(tc358768_driver);
>> +
>> +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfal...@ti.com>");
>> +MODULE_DESCRIPTION("TC358768AXBG/TC358778XBG DSI bridge");
>> +MODULE_LICENSE("GPL v2");
>
>
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
