Hi,
On Thu, Feb 13, 2020 at 10:08:23PM +0200, Andrey Lebedev wrote:
> On Thu, Feb 13, 2020 at 10:43:04AM +0100, Maxime Ripard wrote:
> > On Thu, Feb 13, 2020 at 12:23:57AM +0200, andrey.lebe...@gmail.com wrote:
> > > From: Andrey Lebedev <and...@lebedev.lt>
> > >
> > > Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
> > > provide sample LVDS panel, connected to tcon0.
> > >
> > > Signed-off-by: Andrey Lebedev <and...@lebedev.lt>
> >
> > And this prefix should be ARM: dts: sun7i ;)
>
> Ah, thanks, I think I've got the pattern now!
>
> > > + /omit-if-no-ref/
> > > + lcd_lvds0_pins: lcd_lvds0_pins {
> >
> > underscores in the node names will create a dtc warning at
> > compilation, you should use lcd-lvds0-pins instead.
It's silenced by default, but you'll get them with W=1
> You're right, I wasn't following the naming convention here. dtc doesn't
> produce any warning on this though. Fixed that anyway.
>
> > This will create a spurious warning message for TCON1, since we
> > adjusted the driver to tell it supports LVDS, but there's no LVDS
> > reset line, so we need to make it finer grained.
>
> Yes, I can attribute two of the messages in my dmesg log [1] to this
> ("Missing LVDS properties" and "LVDS output disabled". "sun4i-tcon
> 1c0d000.lcd-controller" is indeed tcon1). And yes, I can see how they
> can be confusing to someone.
>
> I'd need some pointers on how to deal with that though (if we want to do
> it in this scope).
Like I was mentionning, you could introduce a new compatible for each
TCON (tcon0 and tcon1) and only set the support_lvds flag for tcon0
Maxime
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
