On HP 800 G4 DM, if HDMI cable isn't plugged before boot, the HDMI port
becomes useless and never responds to cable hotplugging:
[ 3.031904] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[ 3.031945] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D
Seems like the lspcon chip on the system in question only gets powered
after the cable is plugged.
So let's call lspcon_init() dynamically to properly initialize the
lspcon chip and make HDMI port work.
Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com>
---
v4:
- Trust VBT in intel_infoframe_init().
- Init lspcon in intel_dp_detect().
v3:
- Make sure it's handled under long HPD case.
v2:
- Move lspcon_init() inside of intel_dp_hpd_pulse().
drivers/gpu/drm/i915/display/intel_ddi.c | 17 +----------------
drivers/gpu/drm/i915/display/intel_dp.c | 13 ++++++++++++-
drivers/gpu/drm/i915/display/intel_hdmi.c | 2 +-
3 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
b/drivers/gpu/drm/i915/display/intel_ddi.c
index 33f1dc3d7c1a..ca717434b406 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4741,7 +4741,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
enum port port)
&dev_priv->vbt.ddi_port_info[port];
struct intel_digital_port *intel_dig_port;
struct intel_encoder *encoder;
- bool init_hdmi, init_dp, init_lspcon = false;
+ bool init_hdmi, init_dp;
enum phy phy = intel_port_to_phy(dev_priv, port);
init_hdmi = port_info->supports_dvi || port_info->supports_hdmi;
@@ -4754,7 +4754,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
enum port port)
* is initialized before lspcon.
*/
init_dp = true;
- init_lspcon = true;
init_hdmi = false;
DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
}
@@ -4833,20 +4832,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv,
enum port port)
goto err;
}
- if (init_lspcon) {
- if (lspcon_init(intel_dig_port))
- /* TODO: handle hdmi info frame part */
- DRM_DEBUG_KMS("LSPCON init success on port %c\n",
- port_name(port));
- else
- /*
- * LSPCON init faied, but DP init was success, so
- * lets try to drive as DP++ port.
- */
- DRM_ERROR("LSPCON init failed on port %c\n",
- port_name(port));
- }
-
intel_infoframe_init(intel_dig_port);
return;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
b/drivers/gpu/drm/i915/display/intel_dp.c
index c7424e2a04a3..43117aa86292 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5663,8 +5663,19 @@ intel_dp_detect(struct drm_connector *connector,
/* Can't disconnect eDP */
if (intel_dp_is_edp(intel_dp))
status = edp_detect(intel_dp);
- else if (intel_digital_port_connected(encoder))
+ else if (intel_digital_port_connected(encoder)) {
+ if (intel_bios_is_lspcon_present(dev_priv, dig_port->base.port)
&&
+ !dig_port->lspcon.active) {
+ if (lspcon_init(dig_port))
+ DRM_DEBUG_KMS("LSPCON init success on port
%c\n",
+ port_name(dig_port->base.port));
+ else
+ DRM_DEBUG_KMS("LSPCON init failed on port %c\n",
+ port_name(dig_port->base.port));
+ }
+
status = intel_dp_detect_dpcd(intel_dp);
+ }
else
status = connector_status_disconnected;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c
b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 93ac0f296852..27a5aa8cefc9 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -3100,7 +3100,7 @@ void intel_infoframe_init(struct intel_digital_port
*intel_dig_port)
intel_dig_port->set_infoframes = g4x_set_infoframes;
intel_dig_port->infoframes_enabled = g4x_infoframes_enabled;
} else if (HAS_DDI(dev_priv)) {
- if (intel_dig_port->lspcon.active) {
+ if (intel_bios_is_lspcon_present(dev_priv,
intel_dig_port->base.port)) {
intel_dig_port->write_infoframe =
lspcon_write_infoframe;
intel_dig_port->read_infoframe = lspcon_read_infoframe;
intel_dig_port->set_infoframes = lspcon_set_infoframes;
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
