Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Cc: Andrzej Hajda <a.ha...@samsung.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
---
.../bindings/display/panel/samsung,ld9040.txt | 66 ------------
.../display/panel/samsung,ld9040.yaml | 100 ++++++++++++++++++
2 files changed, 100 insertions(+), 66 deletions(-)
delete mode 100644
Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
create mode 100644
Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
deleted file mode 100644
index 354d4d1df4ff..000000000000
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
-
-Required properties:
- - compatible: "samsung,ld9040"
- - reg: address of the panel on SPI bus
- - vdd3-supply: core voltage supply
- - vci-supply: voltage supply for analog circuits
- - reset-gpios: a GPIO spec for the reset pin
- - display-timings: timings for the connected panel according to [1]
-
-The panel must obey rules for SPI slave device specified in document [2].
-
-Optional properties:
- - power-on-delay: delay after turning regulators on [ms]
- - reset-delay: delay after reset sequence [ms]
- - panel-width-mm: physical panel width [mm]
- - panel-height-mm: physical panel height [mm]
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [3]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
- lcd@0 {
- compatible = "samsung,ld9040";
- reg = <0>;
- vdd3-supply = <&ldo7_reg>;
- vci-supply = <&ldo17_reg>;
- reset-gpios = <&gpy4 5 0>;
- spi-max-frequency = <1200000>;
- spi-cpol;
- spi-cpha;
- power-on-delay = <10>;
- reset-delay = <10>;
- panel-width-mm = <90>;
- panel-height-mm = <154>;
-
- display-timings {
- timing {
- clock-frequency = <23492370>;
- hactive = <480>;
- vactive = <800>;
- hback-porch = <16>;
- hfront-porch = <16>;
- vback-porch = <2>;
- vfront-porch = <28>;
- hsync-len = <2>;
- vsync-len = <1>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <0>;
- };
- };
-
- port {
- lcd_ep: endpoint {
- remote-endpoint = <&fimd_dpi_ep>;
- };
- };
- };
diff --git
a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 000000000000..b6e7e87411e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+maintainers:
+ - Andrzej Hajda <a.ha...@samsung.com>
+
+allOf:
+ - $ref: ../../spi/spi-slave.yaml#
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,ld9040
+
+ display-timings: true
+ port: true
+ reg: true
+ reset-gpios: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ description: delay after turning regulators on [ms]
+
+ reset-delay:
+ description: delay after reset sequence [ms]
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd@0 {
+ compatible = "samsung,ld9040";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0>;
+ vdd3-supply = <&ldo7_reg>;
+ vci-supply = <&ldo17_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ spi-max-frequency = <1200000>;
+ spi-cpol;
+ spi-cpha;
+ power-on-delay = <10>;
+ reset-delay = <10>;
+ panel-width-mm = <90>;
+ panel-height-mm = <154>;
+
+ display-timings {
+ timing {
+ clock-frequency = <23492370>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <16>;
+ hfront-porch = <16>;
+ vback-porch = <2>;
+ vfront-porch = <28>;
+ hsync-len = <2>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_dpi_ep>;
+ };
+ };
+ };
+ };
+
+...
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
