On Wed, Mar 18, 2020 at 08:58:15PM -0600, Rob Herring wrote:
> On Sun, Mar 15, 2020 at 02:43:58PM +0100, Sam Ravnborg wrote:
> > Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> > Cc: Robert Chiras <robert.chi...@nxp.com>
> > Cc: Thierry Reding <thierry.red...@gmail.com>
> > Cc: Sam Ravnborg <s...@ravnborg.org>
> > ---
> > .../display/panel/raydium,rm67191.txt | 41 ----------
> > .../display/panel/raydium,rm67191.yaml | 75 +++++++++++++++++++
> > 2 files changed, 75 insertions(+), 41 deletions(-)
> > delete mode 100644
> > Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> > create mode 100644
> > Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> > deleted file mode 100644
> > index 10424695aa02..000000000000
> > --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> > +++ /dev/null
> > @@ -1,41 +0,0 @@
> > -Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> > -
> > -Required properties:
> > -- compatible: "raydium,rm67191"
> > -- reg: virtual channel for MIPI-DSI protocol
> > - must be <0>
> > -- dsi-lanes: number of DSI lanes to be used
> > - must be <3> or <4>
> > -- port: input port node with endpoint definition as
> > - defined in Documentation/devicetree/bindings/graph.txt;
> > - the input port should be connected to a MIPI-DSI device
> > - driver
> > -
> > -Optional properties:
> > -- reset-gpios: a GPIO spec for the RST_B GPIO pin
> > -- v3p3-supply: phandle to 3.3V regulator that powers the
> > VDD_3V3 pin
> > -- v1p8-supply: phandle to 1.8V regulator that powers the
> > VDD_1V8 pin
> > -- width-mm: see panel-common.txt
> > -- height-mm: see panel-common.txt
> > -- video-mode: 0 - burst-mode
> > - 1 - non-burst with sync event
> > - 2 - non-burst with sync pulse
> > -
> > -Example:
> > -
> > - panel@0 {
> > - compatible = "raydium,rm67191";
> > - reg = <0>;
> > - pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
> > - pinctrl-names = "default";
> > - reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> > - dsi-lanes = <4>;
> > - width-mm = <68>;
> > - height-mm = <121>;
> > -
> > - port {
> > - panel_in: endpoint {
> > - remote-endpoint = <&mipi_out>;
> > - };
> > - };
> > - };
> > diff --git
> > a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> > new file mode 100644
> > index 000000000000..b78b66a4336f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> > @@ -0,0 +1,75 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> > +
> > +maintainers:
> > + - Robert Chiras <robert.chi...@nxp.com>
> > +
> > +allOf:
> > + - $ref: panel-common.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: raydium,rm67191
> > +
> > + reg: true
> > + port: true
> > + reset-gpios: true
> > + width-mm: true
> > + height-mm: true
> > +
> > + dsi-lanes:
> > + description: Number of DSI lanes to be used must be <3> or <4>
> > + enum: [3, 4]
> > +
> > + v3p3-supply:
> > + description: phandle to 3.3V regulator that powers the VDD_3V3 pin
> > +
> > + v1p8-supply:
> > + description: phandle to 1.8V regulator that powers the VDD_1V8 pin
> > +
> > + video-mode:
> > + description: |
> > + 0 - burst-mode
> > + 1 - non-burst with sync event
> > + 2 - non-burst with sync pulse
> > + enum: [0, 1, 2]
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - dsi-lanes
> > + - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + dsi {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + panel {
>
> panel@0
>
> I thought our dsi bus binding would catch this...
Uhhh, it's looking for dsi-controller(@.*)? which is not the common
case found in dts files. We should fix that to dsi(@.*)?.
Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
