In the old txt situation we add/describe only properties that are used
by the driver/hardware itself. With yaml it also filters things in a
node that are used by other drivers like 'assigned-clocks' and
'assigned-clock-rates' for rk3399 and 'power-domains' for most
Rockchip Socs in 'vop' nodes, so add them to 'rockchip-vop.yaml'.

Signed-off-by: Johan Jonker <jbx6...@gmail.com>
---
 .../devicetree/bindings/display/rockchip/rockchip-vop.yaml    | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git 
a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml 
b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index bc58c5132..497a9fb2d 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -75,9 +75,18 @@ properties:
       A port node with endpoint definitions as defined in
       Documentation/devicetree/bindings/media/video-interfaces.txt.
 
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-rates:
+    maxItems: 2
+
   iommus:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -95,6 +104,7 @@ examples:
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
     vopb: vopb@ff930000 {
       compatible = "rockchip,rk3288-vop";
       reg = <0x0 0xff930000 0x0 0x19c>,
@@ -104,6 +114,7 @@ examples:
                <&cru DCLK_VOP0>,
                <&cru HCLK_VOP0>;
       clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
       resets = <&cru SRST_LCDC1_AXI>,
                <&cru SRST_LCDC1_AHB>,
                <&cru SRST_LCDC1_DCLK>;
-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to