Sam Ravnborg <s...@ravnborg.org> 于2020年5月2日周六 下午2:30写道：
> Hi dillon min > > > > okay, thanks alexandre, i will go through these docs. currently i'm on > may > > day holiday, will be back at next wensday. > > after go back to work. i will separate this patch to five part with 9 > > patchs , should be more clear > > > > dts releated > > 1, ARM: dts: stm32: Add i2c3 node for stm32f429 > > 2, ARM: dts: stm32: Add drm panel ili9341 nodes connect to ldtc > > support for stm32f429-disco board > > 3, ARM: dts: stm32: Add stmpe811 touch screen support for > > stm32f429-disco board > > 4, ARM: dts: stm32: Add l3gd20 gyroscope sensor support for > > stm32f429-disco board > > > > clk releated > > 1, clk: stm32: Fix ltdc loading hang in set clk rate, pll_hw set to > > clks[PLL_VCO_SAI] but not clks[PLL_SAI] > > 2, clk: stm32: Add CLK_IGNORE_UNUSED flags for ltdc, make sure ltdc > clk > > not be released after system startup > > > > spi releated > > 1, spi: stm32: Add transfer mode SPI_SIMPLE_RX, SPI_3WIRE_RX support > > for stm32f4 > > > > drm releated > > 1, drm/panel: Add panel driver ilitek-ili9341 > > > > doc releated > > 1, dt-bindings: display: panel: Add binding document for Ilitek > Ili9341 > > Patch separation looks good. > Please cc: me on both the binding and the panel patches. > The binding must be in DT Schema format (.yaml). > See a lot of examples in drm-misc-next for inspiration. > > Looks forward to see/review your submission. > > Sam > hi Sam, just sumbmit a patchset about ltdc with ili-9341 support on stm32f429-disco board, with yaml documents inside as well. thanks, Dillon,
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
