On Wed, Jun 03, 2020 at 10:16:17AM +0200, Daniel Vetter wrote:
> On Tue, Jun 02, 2020 at 08:13:17PM +0300, Laurent Pinchart wrote:
> > Hi Daniel,
> >
> > On Tue, Jun 02, 2020 at 03:12:37PM +0200, Daniel Vetter wrote:
> > > On Sat, May 30, 2020 at 05:14:21AM +0300, Laurent Pinchart wrote:
> > > > On Mon, Mar 23, 2020 at 10:27:21PM +0100, Stefan Agner wrote:
> > > > > On 2020-03-09 20:51, Laurent Pinchart wrote:
> > > > > > Replace the manual connector implementation based on drm_panel with
> > > > > > the
> > > > > > drm_panel_bridge helper. This simplifies the mxsfb driver by
> > > > > > removing
> > > > > > connector-related code, and standardizing all pipeline control
> > > > > > operations on bridges.
> > > > > >
> > > > > > A hack is needed to get hold of the connector, as that's our only
> > > > > > source
> > > > > > of bus flags and formats for now. As soon as the bridge API
> > > > > > provides us
> > > > > > with that information this can be fixed.
> > > > >
> > > > > This seems like a nice simplification.
> > > > >
> > > > > I gave this a go applied on today's drm-misc-next using a Colibri iMX7
> > > > > (imx7d-colibri-emmc-eval-v3.dts device tree). This device makes use of
> > > > > the simple panel driver. I get this when booting:
> > > > >
> > > > > [ 2.976698] [drm] Supports vblank timestamp caching Rev 2
> > > > > (21.10.2013).
> > > > > [ 2.983526] ------------[ cut here ]------------
> > > > > [ 2.988180] WARNING: CPU: 0 PID: 1 at
> > > > > drivers/gpu/drm/bridge/panel.c:267 devm_drm_panel_bridge_add+0x25/0x28
> > > > > [ 2.998059] Modules linked in:
> > > > > [ 3.001159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> > > > > 5.6.0-rc5-yocto-standard-01250-ga4ce5db7c9f1 #29
> > > > > [ 3.010493] Hardware name: Freescale i.MX7 Dual (Device Tree)
> > > > > [ 3.016281] [<c010f089>] (unwind_backtrace) from [<c010a9bb>]
> > > > > (show_stack+0xb/0xc)
> > > > > [ 3.023887] [<c010a9bb>] (show_stack) from [<c08b33cf>]
> > > > > (dump_stack+0x63/0x70)
> > > > > [ 3.031144] [<c08b33cf>] (dump_stack) from [<c0124385>]
> > > > > (__warn+0x9d/0xb0)
> > > > > [ 3.038047] [<c0124385>] (__warn) from [<c0124403>]
> > > > > (warn_slowpath_fmt+0x6b/0x70)
> > > > > [ 3.045564] [<c0124403>] (warn_slowpath_fmt) from [<c04ebf65>]
> > > > > (devm_drm_panel_bridge_add+0x25/0x28)
> > > > > [ 3.054736] [<c04ebf65>] (devm_drm_panel_bridge_add) from
> > > > > [<c051fe7f>] (mxsfb_probe+0x197/0x2e0)
> > > > > [ 3.063559] [<c051fe7f>] (mxsfb_probe) from [<c0532e91>]
> > > > > (platform_drv_probe+0x2d/0x60)
> > > > > [ 3.071598] [<c0532e91>] (platform_drv_probe) from [<c0531615>]
> > > > > (really_probe+0x1dd/0x330)
> > > > > [ 3.079897] [<c0531615>] (really_probe) from [<c05318b3>]
> > > > > (driver_probe_device+0x4f/0x154)
> > > > > [ 3.088195] [<c05318b3>] (driver_probe_device) from [<c0531b3f>]
> > > > > (device_driver_attach+0x37/0x44)
> > > > > [ 3.097101] [<c0531b3f>] (device_driver_attach) from [<c0531bc7>]
> > > > > (__driver_attach+0x7b/0xec)
> > > > > [ 3.105660] [<c0531bc7>] (__driver_attach) from [<c0530069>]
> > > > > (bus_for_each_dev+0x3d/0x64)
> > > > > [ 3.113870] [<c0530069>] (bus_for_each_dev) from [<c0530b9b>]
> > > > > (bus_add_driver+0xef/0x160)
> > > > > [ 3.122081] [<c0530b9b>] (bus_add_driver) from [<c053238d>]
> > > > > (driver_register+0x35/0x9c)
> > > > > [ 3.130119] [<c053238d>] (driver_register) from [<c0102de9>]
> > > > > (do_one_initcall+0x3d/0x1e4)
> > > > > [ 3.138333] [<c0102de9>] (do_one_initcall) from [<c1100d13>]
> > > > > (kernel_init_freeable+0x1b3/0x1fc)
> > > > > [ 3.147069] [<c1100d13>] (kernel_init_freeable) from [<c08c3f7b>]
> > > > > (kernel_init+0x7/0xd0)
> > > > > [ 3.155194] [<c08c3f7b>] (kernel_init) from [<c01010f9>]
> > > > > (ret_from_fork+0x11/0x38)
> > > > > [ 3.162789] Exception stack(0xec0e3fb0 to 0xec0e3ff8)
> > > > > [ 3.167862] 3fa0: 00000000
> > > > > 00000000 00000000 00000000
> > > > > [ 3.176071] 3fc0: 00000000 00000000 00000000 00000000 00000000
> > > > > 00000000 00000000 00000000
> > > > > [ 3.184278] 3fe0: 00000000 00000000 00000000 00000000 00000013
> > > > > 00000000
> > > > > [ 3.191029] ---[ end trace b69e1f44de470959 ]---
> > > > > [ 3.195671] mxsfb 30730000.lcdif: Cannot connect bridge: -19
> > > > >
> > > > > Should we maybe use devm_drm_panel_bridge_add_typed?
> > > >
> > > > As Sam reported, this is caused by the panel not setting connector_type.
> > > > We could use devm_drm_panel_bridge_add_typed(), even if I like the
> > > > warning as it uncovers the problematic panels and gets them fixed. What
> > > > would be your preference ?
> > >
> > > Adding warnings everywhere is kinda uncool, at least my experience is that
> > > if there's too much you get warning overload and train people to ignore
> > > them.
> > >
> > > Imo either hide the wwarning for now, or if it's not too much work, review
> > > all the panel drivers and make sure they set the connector type somewhere.
> >
> > All panel drivers but panel-simple set the connector type. For
> > panel-simple, the type is stored in the panel_desc panel description,
> > and out of the 123 supported panels, only 48 have a connector type. I've
> > just sent a patch to fix this for the 7 DSI panels, so only 68 panels to
> > go :-) This will require trying to find the corresponding datasheets, so
> > that's a large effort for a single developer. That's why I was hoping a
> > WARN_ON() could help distributing the work :-) I hear your concern
> > though, and I'll set a default in this driver for the time being.
>
> I think some fallback in simple-panel.c with maybe a fixme would be ok for
> this case. I don't think this has to be perfect, afaik userspace at best
> just checks "is this a panel", not which specific type.
I just applied Laurent's patch for the DSI panels in panel-simple.
In another patch-set posted as part of a bridge update I used
DRM_MODE_CONNECTOR_DPI as the default for all panels in panel-simple
that did not have any connector type specified.
I think this matches what you suggest above.
I will re-post the patch series when time permits.
Sam
> -Daniel
>
> >
> > > Warnings are kinda ok once you're pretty sure you got them all, and want
> > > to make sure newly added drivers get this all right. But not before we've
> > > reached that.
> > >
> > > > > Two more comments below.
> > > > >
> > > > > > Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> > > > > > ---
> > > > > > drivers/gpu/drm/mxsfb/Makefile | 2 +-
> > > > > > drivers/gpu/drm/mxsfb/mxsfb_drv.c | 105
> > > > > > ++++++++++++++----------------
> > > > > > drivers/gpu/drm/mxsfb/mxsfb_drv.h | 5 +-
> > > > > > drivers/gpu/drm/mxsfb/mxsfb_out.c | 99
> > > > > > ----------------------------
> > > > > > 4 files changed, 53 insertions(+), 158 deletions(-)
> > > > > > delete mode 100644 drivers/gpu/drm/mxsfb/mxsfb_out.c
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/mxsfb/Makefile
> > > > > > b/drivers/gpu/drm/mxsfb/Makefile
> > > > > > index ff6e358088fa..811584e54ad1 100644
> > > > > > --- a/drivers/gpu/drm/mxsfb/Makefile
> > > > > > +++ b/drivers/gpu/drm/mxsfb/Makefile
> > > > > > @@ -1,3 +1,3 @@
> > > > > > # SPDX-License-Identifier: GPL-2.0-only
> > > > > > -mxsfb-y := mxsfb_drv.o mxsfb_crtc.o mxsfb_out.o
> > > > > > +mxsfb-y := mxsfb_drv.o mxsfb_crtc.o
> > > > > > obj-$(CONFIG_DRM_MXSFB) += mxsfb.o
> > > > > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> > > > > > b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> > > > > > index 2e6068d96034..cffc70257bd3 100644
> > > > > > --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> > > > > > +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> > > > > > @@ -29,7 +29,6 @@
> > > > > > #include <drm/drm_gem_framebuffer_helper.h>
> > > > > > #include <drm/drm_irq.h>
> > > > > > #include <drm/drm_of.h>
> > > > > > -#include <drm/drm_panel.h>
> > > > > > #include <drm/drm_probe_helper.h>
> > > > > > #include <drm/drm_simple_kms_helper.h>
> > > > > > #include <drm/drm_vblank.h>
> > > > > > @@ -100,29 +99,11 @@ static void mxsfb_pipe_enable(struct
> > > > > > drm_simple_display_pipe *pipe,
> > > > > > struct drm_crtc_state *crtc_state,
> > > > > > struct drm_plane_state *plane_state)
> > > > > > {
> > > > > > - struct drm_connector *connector;
> > > > > > struct mxsfb_drm_private *mxsfb =
> > > > > > drm_pipe_to_mxsfb_drm_private(pipe);
> > > > > > struct drm_device *drm = pipe->plane.dev;
> > > > > >
> > > > > > - if (!mxsfb->connector) {
> > > > > > - list_for_each_entry(connector,
> > > > > > - &drm->mode_config.connector_list,
> > > > > > - head)
> > > > > > - if (connector->encoder == &mxsfb->pipe.encoder)
> > > > > > {
> > > > > > - mxsfb->connector = connector;
> > > > > > - break;
> > > > > > - }
> > > > > > - }
> > > > > > -
> > > > > > - if (!mxsfb->connector) {
> > > > > > - dev_warn(drm->dev, "No connector attached, using
> > > > > > default\n");
> > > > > > - mxsfb->connector = &mxsfb->panel_connector;
> > > > > > - }
> > > > > > -
> > > > > > pm_runtime_get_sync(drm->dev);
> > > > > > - drm_panel_prepare(mxsfb->panel);
> > > > > > mxsfb_crtc_enable(mxsfb);
> > > > > > - drm_panel_enable(mxsfb->panel);
> > > > > > }
> > > > > >
> > > > > > static void mxsfb_pipe_disable(struct drm_simple_display_pipe
> > > > > > *pipe)
> > > > > > @@ -132,9 +113,7 @@ static void mxsfb_pipe_disable(struct
> > > > > > drm_simple_display_pipe *pipe)
> > > > > > struct drm_crtc *crtc = &pipe->crtc;
> > > > > > struct drm_pending_vblank_event *event;
> > > > > >
> > > > > > - drm_panel_disable(mxsfb->panel);
> > > > > > mxsfb_crtc_disable(mxsfb);
> > > > > > - drm_panel_unprepare(mxsfb->panel);
> > > > > > pm_runtime_put_sync(drm->dev);
> > > > > >
> > > > > > spin_lock_irq(&drm->event_lock);
> > > > > > @@ -144,9 +123,6 @@ static void mxsfb_pipe_disable(struct
> > > > > > drm_simple_display_pipe *pipe)
> > > > > > drm_crtc_send_vblank_event(crtc, event);
> > > > > > }
> > > > > > spin_unlock_irq(&drm->event_lock);
> > > > > > -
> > > > > > - if (mxsfb->connector != &mxsfb->panel_connector)
> > > > > > - mxsfb->connector = NULL;
> > > > > > }
> > > > > >
> > > > > > static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
> > > > > > @@ -190,6 +166,48 @@ static struct drm_simple_display_pipe_funcs
> > > > > > mxsfb_funcs = {
> > > > > > .disable_vblank = mxsfb_pipe_disable_vblank,
> > > > > > };
> > > > > >
> > > > > > +static int mxsfb_attach_bridge(struct mxsfb_drm_private *mxsfb)
> > > > > > +{
> > > > > > + struct drm_device *drm = mxsfb->drm;
> > > > > > + struct drm_connector_list_iter iter;
> > > > > > + struct drm_panel *panel;
> > > > > > + struct drm_bridge *bridge;
> > > > > > + int ret;
> > > > > > +
> > > > > > + ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
> > > > > > &panel,
> > > > > > + &bridge);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > +
> > > > > > + if (panel) {
> > > > > > + bridge = devm_drm_panel_bridge_add(drm->dev, panel);
> > > > >
> > > > > Do we need a select DRM_PANEL_BRIDGE in Kconfig maybe? From what I can
> > > > > tell there is no devm_drm_panel_bridge_add() stub if DRM_PANEL_BRIDGE
> > > > > is
> > > > > not selected.
> > > >
> > > > You're right, I'll add it.
> > > >
> > > > > > + if (IS_ERR(bridge))
> > > > > > + return PTR_ERR(bridge);
> > > > > > + }
> > > > > > +
> > > > > > + if (!bridge)
> > > > > > + return -ENODEV;
> > > > > > +
> > > > > > + ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
> > > > > > bridge);
> > > > > > + if (ret) {
> > > > > > + DRM_DEV_ERROR(drm->dev,
> > > > > > + "failed to attach bridge: %d\n", ret);
> > > > > > + return ret;
> > > > > > + }
> > > > > > +
> > > > > > + mxsfb->bridge = bridge;
> > > > > > +
> > > > > > + /*
> > > > > > + * Get hold of the connector. This is a bit of a hack, until
> > > > > > the bridge
> > > > > > + * API gives us bus flags and formats.
> > > > > > + */
> > > > > > + drm_connector_list_iter_begin(drm, &iter);
> > > > > > + mxsfb->connector = drm_connector_list_iter_next(&iter);
> > > > > > + drm_connector_list_iter_end(&iter);
> > > > >
> > > > > Could we not just use drm_panel_bridge_connector() here?
> > > >
> > > > There's no guarantee that mxsfb->bridge is a panel bridge, the LCDIF
> > > > output could be connected to another bridge in which case
> > > > drm_of_find_panel_or_bridge() will set panel to NULL and bridge to a
> > > > non-NULL value).
> > > >
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > static int mxsfb_load(struct drm_device *drm, unsigned long flags)
> > > > > > {
> > > > > > struct platform_device *pdev = to_platform_device(drm->dev);
> > > > > > @@ -201,6 +219,7 @@ static int mxsfb_load(struct drm_device *drm,
> > > > > > unsigned long flags)
> > > > > > if (!mxsfb)
> > > > > > return -ENOMEM;
> > > > > >
> > > > > > + mxsfb->drm = drm;
> > > > > > drm->dev_private = mxsfb;
> > > > > > mxsfb->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
> > > > > >
> > > > > > @@ -236,41 +255,17 @@ static int mxsfb_load(struct drm_device *drm,
> > > > > > unsigned long flags)
> > > > > > /* Modeset init */
> > > > > > drm_mode_config_init(drm);
> > > > > >
> > > > > > - ret = mxsfb_create_output(drm);
> > > > > > - if (ret < 0) {
> > > > > > - dev_err(drm->dev, "Failed to create outputs\n");
> > > > > > - goto err_vblank;
> > > > > > - }
> > > > > > -
> > > > > > ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe,
> > > > > > &mxsfb_funcs,
> > > > > > - mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
> > > > > > - mxsfb->connector);
> > > > > > + mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
> > > > > > NULL);
> > > > > > if (ret < 0) {
> > > > > > dev_err(drm->dev, "Cannot setup simple display pipe\n");
> > > > > > goto err_vblank;
> > > > > > }
> > > > > >
> > > > > > - /*
> > > > > > - * Attach panel only if there is one.
> > > > > > - * If there is no panel attach, it must be a bridge. In this
> > > > > > case, we
> > > > > > - * need a reference to its connector for a proper
> > > > > > initialization.
> > > > > > - * We will do this check in pipe->enable(), since the connector
> > > > > > won't
> > > > > > - * be attached to an encoder until then.
> > > > > > - */
> > > > > > -
> > > > > > - if (mxsfb->panel) {
> > > > > > - ret = drm_panel_attach(mxsfb->panel, mxsfb->connector);
> > > > > > - if (ret) {
> > > > > > - dev_err(drm->dev, "Cannot connect panel: %d\n",
> > > > > > ret);
> > > > > > - goto err_vblank;
> > > > > > - }
> > > > > > - } else if (mxsfb->bridge) {
> > > > > > - ret =
> > > > > > drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
> > > > > > -
> > > > > > mxsfb->bridge);
> > > > > > - if (ret) {
> > > > > > - dev_err(drm->dev, "Cannot connect bridge:
> > > > > > %d\n", ret);
> > > > > > - goto err_vblank;
> > > > > > - }
> > > > > > + ret = mxsfb_attach_bridge(mxsfb);
> > > > > > + if (ret) {
> > > > > > + dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
> > > > > > + goto err_vblank;
> > > > > > }
> > > > > >
> > > > > > drm->mode_config.min_width = MXSFB_MIN_XRES;
> > > > > > @@ -288,7 +283,7 @@ static int mxsfb_load(struct drm_device *drm,
> > > > > > unsigned long flags)
> > > > > >
> > > > > > if (ret < 0) {
> > > > > > dev_err(drm->dev, "Failed to install IRQ handler\n");
> > > > > > - goto err_irq;
> > > > > > + goto err_vblank;
> > > > > > }
> > > > > >
> > > > > > drm_kms_helper_poll_init(drm);
> > > > > > @@ -299,8 +294,6 @@ static int mxsfb_load(struct drm_device *drm,
> > > > > > unsigned long flags)
> > > > > >
> > > > > > return 0;
> > > > > >
> > > > > > -err_irq:
> > > > > > - drm_panel_detach(mxsfb->panel);
> > > > > > err_vblank:
> > > > > > pm_runtime_disable(drm->dev);
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> > > > > > b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> > > > > > index 0b65b5194a9c..0e3e5a63bbf9 100644
> > > > > > --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> > > > > > +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> > > > > > @@ -8,6 +8,8 @@
> > > > > > #ifndef __MXSFB_DRV_H__
> > > > > > #define __MXSFB_DRV_H__
> > > > > >
> > > > > > +struct drm_device;
> > > > > > +
> > > > > > struct mxsfb_devdata {
> > > > > > unsigned int transfer_count;
> > > > > > unsigned int cur_buf;
> > > > > > @@ -26,10 +28,9 @@ struct mxsfb_drm_private {
> > > > > > struct clk *clk_axi;
> > > > > > struct clk *clk_disp_axi;
> > > > > >
> > > > > > + struct drm_device *drm;
> > > > > > struct drm_simple_display_pipe pipe;
> > > > > > - struct drm_connector panel_connector;
> > > > > > struct drm_connector *connector;
> > > > > > - struct drm_panel *panel;
> > > > > > struct drm_bridge *bridge;
> > > > > > };
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> > > > > > b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> > > > > > deleted file mode 100644
> > > > > > index 9eca1605d11d..000000000000
> > > > > > --- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> > > > > > +++ /dev/null
> > > > > > @@ -1,99 +0,0 @@
> > > > > > -// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > > -/*
> > > > > > - * Copyright (C) 2016 Marek Vasut <ma...@denx.de>
> > > > > > - */
> > > > > > -
> > > > > > -#include <linux/of_graph.h>
> > > > > > -
> > > > > > -#include <drm/drm_atomic.h>
> > > > > > -#include <drm/drm_atomic_helper.h>
> > > > > > -#include <drm/drm_crtc.h>
> > > > > > -#include <drm/drm_fb_cma_helper.h>
> > > > > > -#include <drm/drm_gem_cma_helper.h>
> > > > > > -#include <drm/drm_of.h>
> > > > > > -#include <drm/drm_panel.h>
> > > > > > -#include <drm/drm_plane_helper.h>
> > > > > > -#include <drm/drm_probe_helper.h>
> > > > > > -#include <drm/drm_simple_kms_helper.h>
> > > > > > -
> > > > > > -#include "mxsfb_drv.h"
> > > > > > -
> > > > > > -static struct mxsfb_drm_private *
> > > > > > -drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
> > > > > > -{
> > > > > > - return container_of(connector, struct mxsfb_drm_private,
> > > > > > - panel_connector);
> > > > > > -}
> > > > > > -
> > > > > > -static int mxsfb_panel_get_modes(struct drm_connector *connector)
> > > > > > -{
> > > > > > - struct mxsfb_drm_private *mxsfb =
> > > > > > - drm_connector_to_mxsfb_drm_private(connector);
> > > > > > -
> > > > > > - if (mxsfb->panel)
> > > > > > - return drm_panel_get_modes(mxsfb->panel, connector);
> > > > > > -
> > > > > > - return 0;
> > > > > > -}
> > > > > > -
> > > > > > -static const struct
> > > > > > -drm_connector_helper_funcs mxsfb_panel_connector_helper_funcs = {
> > > > > > - .get_modes = mxsfb_panel_get_modes,
> > > > > > -};
> > > > > > -
> > > > > > -static enum drm_connector_status
> > > > > > -mxsfb_panel_connector_detect(struct drm_connector *connector, bool
> > > > > > force)
> > > > > > -{
> > > > > > - struct mxsfb_drm_private *mxsfb =
> > > > > > - drm_connector_to_mxsfb_drm_private(connector);
> > > > > > -
> > > > > > - if (mxsfb->panel)
> > > > > > - return connector_status_connected;
> > > > > > -
> > > > > > - return connector_status_disconnected;
> > > > > > -}
> > > > > > -
> > > > > > -static void mxsfb_panel_connector_destroy(struct drm_connector
> > > > > > *connector)
> > > > > > -{
> > > > > > - struct mxsfb_drm_private *mxsfb =
> > > > > > - drm_connector_to_mxsfb_drm_private(connector);
> > > > > > -
> > > > > > - if (mxsfb->panel)
> > > > > > - drm_panel_detach(mxsfb->panel);
> > > > > > -
> > > > > > - drm_connector_unregister(connector);
> > > > > > - drm_connector_cleanup(connector);
> > > > > > -}
> > > > > > -
> > > > > > -static const struct drm_connector_funcs
> > > > > > mxsfb_panel_connector_funcs = {
> > > > > > - .detect = mxsfb_panel_connector_detect,
> > > > > > - .fill_modes =
> > > > > > drm_helper_probe_single_connector_modes,
> > > > > > - .destroy = mxsfb_panel_connector_destroy,
> > > > > > - .reset = drm_atomic_helper_connector_reset,
> > > > > > - .atomic_duplicate_state =
> > > > > > drm_atomic_helper_connector_duplicate_state,
> > > > > > - .atomic_destroy_state =
> > > > > > drm_atomic_helper_connector_destroy_state,
> > > > > > -};
> > > > > > -
> > > > > > -int mxsfb_create_output(struct drm_device *drm)
> > > > > > -{
> > > > > > - struct mxsfb_drm_private *mxsfb = drm->dev_private;
> > > > > > - int ret;
> > > > > > -
> > > > > > - ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
> > > > > > - &mxsfb->panel,
> > > > > > &mxsfb->bridge);
> > > > > > - if (ret)
> > > > > > - return ret;
> > > > > > -
> > > > > > - if (mxsfb->panel) {
> > > > > > - mxsfb->connector = &mxsfb->panel_connector;
> > > > > > - mxsfb->connector->dpms = DRM_MODE_DPMS_OFF;
> > > > > > - mxsfb->connector->polled = 0;
> > > > > > - drm_connector_helper_add(mxsfb->connector,
> > > > > > -
> > > > > > &mxsfb_panel_connector_helper_funcs);
> > > > > > - ret = drm_connector_init(drm, mxsfb->connector,
> > > > > > - &mxsfb_panel_connector_funcs,
> > > > > > - DRM_MODE_CONNECTOR_Unknown);
> > > > > > - }
> > > > > > -
> > > > > > - return ret;
> > > > > > -}
> >
> > --
> > Regards,
> >
> > Laurent Pinchart
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
