On Thu, Jun 11, 2020 at 10:28:09AM +0200, Thomas Zimmermann wrote:
> Converts the ast driver to drm_info() and drm_err(). No functional
> changes are made.
>
> Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
I didn't check whether it compiles, but looks all good to me.
Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/ast/ast_main.c | 34 +++++++++++++++++-----------------
> drivers/gpu/drm/ast/ast_mode.c | 8 ++++----
> drivers/gpu/drm/ast/ast_post.c | 2 +-
> drivers/gpu/drm/ast/ast_ttm.c | 2 +-
> 4 files changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
> index a2ef3d9077671..9063fdc9e8852 100644
> --- a/drivers/gpu/drm/ast/ast_main.c
> +++ b/drivers/gpu/drm/ast/ast_main.c
> @@ -79,7 +79,7 @@ static void ast_detect_config_mode(struct drm_device *dev,
> u32 *scu_rev)
> scu_rev)) {
> /* We do, disable P2A access */
> ast->config_mode = ast_use_dt;
> - DRM_INFO("Using device-tree for configuration\n");
> + drm_info(dev, "Using device-tree for configuration\n");
> return;
> }
>
> @@ -101,7 +101,7 @@ static void ast_detect_config_mode(struct drm_device
> *dev, u32 *scu_rev)
> /* P2A works, grab silicon revision */
> ast->config_mode = ast_use_p2a;
>
> - DRM_INFO("Using P2A bridge for configuration\n");
> + drm_info(dev, "Using P2A bridge for configuration\n");
>
> /* Read SCU7c (silicon revision register) */
> ast_write32(ast, 0xf004, 0x1e6e0000);
> @@ -112,7 +112,7 @@ static void ast_detect_config_mode(struct drm_device
> *dev, u32 *scu_rev)
> }
>
> /* We have a P2A bridge but it's disabled */
> - DRM_INFO("P2A bridge disabled, using default configuration\n");
> + drm_info(dev, "P2A bridge disabled, using default configuration\n");
> }
>
> static int ast_detect_chip(struct drm_device *dev, bool *need_post)
> @@ -128,7 +128,7 @@ static int ast_detect_chip(struct drm_device *dev, bool
> *need_post)
> */
> if (!ast_is_vga_enabled(dev)) {
> ast_enable_vga(dev);
> - DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
> + drm_info(dev, "VGA not enabled on entry, requesting chip
> POST\n");
> *need_post = true;
> } else
> *need_post = false;
> @@ -144,36 +144,36 @@ static int ast_detect_chip(struct drm_device *dev, bool
> *need_post)
> /* Identify chipset */
> if (dev->pdev->revision >= 0x40) {
> ast->chip = AST2500;
> - DRM_INFO("AST 2500 detected\n");
> + drm_info(dev, "AST 2500 detected\n");
> } else if (dev->pdev->revision >= 0x30) {
> ast->chip = AST2400;
> - DRM_INFO("AST 2400 detected\n");
> + drm_info(dev, "AST 2400 detected\n");
> } else if (dev->pdev->revision >= 0x20) {
> ast->chip = AST2300;
> - DRM_INFO("AST 2300 detected\n");
> + drm_info(dev, "AST 2300 detected\n");
> } else if (dev->pdev->revision >= 0x10) {
> switch (scu_rev & 0x0300) {
> case 0x0200:
> ast->chip = AST1100;
> - DRM_INFO("AST 1100 detected\n");
> + drm_info(dev, "AST 1100 detected\n");
> break;
> case 0x0100:
> ast->chip = AST2200;
> - DRM_INFO("AST 2200 detected\n");
> + drm_info(dev, "AST 2200 detected\n");
> break;
> case 0x0000:
> ast->chip = AST2150;
> - DRM_INFO("AST 2150 detected\n");
> + drm_info(dev, "AST 2150 detected\n");
> break;
> default:
> ast->chip = AST2100;
> - DRM_INFO("AST 2100 detected\n");
> + drm_info(dev, "AST 2100 detected\n");
> break;
> }
> ast->vga2_clone = false;
> } else {
> ast->chip = AST2000;
> - DRM_INFO("AST 2000 detected\n");
> + drm_info(dev, "AST 2000 detected\n");
> }
>
> /* Check if we support wide screen */
> @@ -248,13 +248,13 @@ static int ast_detect_chip(struct drm_device *dev, bool
> *need_post)
> /* Print stuff for diagnostic purposes */
> switch(ast->tx_chip_type) {
> case AST_TX_SIL164:
> - DRM_INFO("Using Sil164 TMDS transmitter\n");
> + drm_info(dev, "Using Sil164 TMDS transmitter\n");
> break;
> case AST_TX_DP501:
> - DRM_INFO("Using DP501 DisplayPort transmitter\n");
> + drm_info(dev, "Using DP501 DisplayPort transmitter\n");
> break;
> default:
> - DRM_INFO("Analog VGA only\n");
> + drm_info(dev, "Analog VGA only\n");
> }
> return 0;
> }
> @@ -443,7 +443,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long
> flags)
> * and higher).
> */
> if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
> - DRM_INFO("platform has no IO space, trying MMIO\n");
> + drm_info(dev, "platform has no IO space, trying MMIO\n");
> ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
> }
>
> @@ -465,7 +465,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long
> flags)
> if (ret)
> goto out_free;
> ast->vram_size = ast_get_vram_info(dev);
> - DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
> + drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
> ast->mclk, ast->dram_type,
> ast->dram_bus_width, ast->vram_size);
>
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index 10211751182da..ff789f2db9fc8 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -1104,7 +1104,7 @@ static int ast_connector_init(struct drm_device *dev)
> connector = &ast_connector->base;
> ast_connector->i2c = ast_i2c_create(dev);
> if (!ast_connector->i2c)
> - DRM_ERROR("failed to add ddc bus for connector\n");
> + drm_err(dev, "failed to add ddc bus for connector\n");
>
> drm_connector_init_with_ddc(dev, connector,
> &ast_connector_funcs,
> @@ -1188,7 +1188,7 @@ int ast_mode_init(struct drm_device *dev)
> ARRAY_SIZE(ast_primary_plane_formats),
> NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> if (ret) {
> - DRM_ERROR("ast: drm_universal_plane_init() failed: %d\n", ret);
> + drm_err(dev, "ast: drm_universal_plane_init() failed: %d\n",
> ret);
> return ret;
> }
> drm_plane_helper_add(&ast->primary_plane,
> @@ -1200,7 +1200,7 @@ int ast_mode_init(struct drm_device *dev)
> ARRAY_SIZE(ast_cursor_plane_formats),
> NULL, DRM_PLANE_TYPE_CURSOR, NULL);
> if (ret) {
> - DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
> + drm_err(dev, "drm_universal_plane_failed(): %d\n", ret);
> return ret;
> }
> drm_plane_helper_add(&ast->cursor_plane,
> @@ -1322,7 +1322,7 @@ static struct ast_i2c_chan *ast_i2c_create(struct
> drm_device *dev)
> i2c->bit.getscl = get_clock;
> ret = i2c_bit_add_bus(&i2c->adapter);
> if (ret) {
> - DRM_ERROR("Failed to register bit i2c\n");
> + drm_err(dev, "Failed to register bit i2c\n");
> goto out_free;
> }
>
> diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
> index 226e1290227ad..c043fe7175530 100644
> --- a/drivers/gpu/drm/ast/ast_post.c
> +++ b/drivers/gpu/drm/ast/ast_post.c
> @@ -2067,7 +2067,7 @@ void ast_post_chip_2500(struct drm_device *dev)
> }
>
> if (!ast_dram_init_2500(ast))
> - DRM_ERROR("DRAM init failed !\n");
> + drm_err(dev, "DRAM init failed !\n");
>
> temp = ast_mindwm(ast, 0x1e6e2040);
> ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
> diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
> index fad34106083a8..9c3788a4c1c54 100644
> --- a/drivers/gpu/drm/ast/ast_ttm.c
> +++ b/drivers/gpu/drm/ast/ast_ttm.c
> @@ -44,7 +44,7 @@ int ast_mm_init(struct ast_private *ast)
> ast->vram_size);
> if (IS_ERR(vmm)) {
> ret = PTR_ERR(vmm);
> - DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
> + drm_err(dev, "Error initializing VRAM MM; %d\n", ret);
> return ret;
> }
>
> --
> 2.26.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
