Hi Laurent,
[...]
> >
> > +static const struct display_timing satoz_sat050at40h12r2_timing = {
> > + .pixelclock = {33300000, 33300000, 50000000},
> > + .hactive = {800, 800, 800},
> > + .hfront_porch = {16, 210, 354},
> > + .hback_porch = {46, 46, 46},
> > + .hsync_len = {1, 1, 40},
> > + .vactive = {480, 480, 480},
> > + .vfront_porch = {7, 22, 147},
> > + .vback_porch = {23, 23, 23},
> > + .vsync_len = {1, 1, 20},
> > +};
> > +
> > +static const struct panel_desc satoz_sat050at40h12r2 = {
> > + .timings = &satoz_sat050at40h12r2_timing,
> > + .num_timings = 1,
> > + .bpc = 8,
> > + .size = {
> > + .width = 108,
> > + .height = 65,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > + .connector_type = DRM_MODE_CONNECTOR_LVDS,
>
> I'm trying to fix inconsistencies in the panel-simple driver, and this
> caught my eyes. MEDIA_BUS_FMT_RGB888_1X24 isn't a correct format for
> LVDS panels. MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
> MEDIA_BUS_FMT_RGB888_1X7X4_SPWG or MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA
> should be used instead. As I couldn't find documentation for the panel,
> I can't tell which format is correct. Could you please help ?
Indeed, I got this datasheet under NDA.
We checked with Paul, we think the right format is:
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Thanks,
Miquèl
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
