Firstly, all lines must begin with a '*'.  Secondly, arg descriptions
must be spelt correctly, so fix misspelling of 'gpioD_enable' and
'short_detecTion_threshold'

Fixes the following W=1 kernel build warning(s):

 drivers/video/backlight/sky81452-backlight.c:46: warning: bad line:            
     If it is not defined, default name is lcd-backlight.
 drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter 
or member 'gpiod_enable' not described in 'sky81452_bl_platform_data'
 drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter 
or member 'short_detection_threshold' not described in 
'sky81452_bl_platform_data'

Cc: Daniel Thompson <daniel.thomp...@linaro.org>
Cc: Jingoo Han <jingooh...@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
Cc: Gyungoh Yoo <jack....@skyworksinc.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fb...@vger.kernel.org
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 drivers/video/backlight/sky81452-backlight.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/backlight/sky81452-backlight.c 
b/drivers/video/backlight/sky81452-backlight.c
index 83ccb3d940fae..0ce1815850080 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -43,13 +43,13 @@
 /**
  * struct sky81452_platform_data
  * @name:      backlight driver name.
-               If it is not defined, default name is lcd-backlight.
- * @gpios_enable:GPIO descriptor which control EN pin
+ *             If it is not defined, default name is lcd-backlight.
+ * @gpiod_enable:GPIO descriptor which control EN pin
  * @enable:    Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
  * @ignore_pwm:        true if DPWMI should be ignored.
  * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode.
  * @phase_shift:true is phase shift mode.
- * @short_detecion_threshold:  It should be one of 4, 5, 6 and 7V.
+ * @short_detection_threshold: It should be one of 4, 5, 6 and 7V.
  * @boost_current_limit:       It should be one of 2300, 2750mA.
  */
 struct sky81452_bl_platform_data {
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to