Warn is we detect a panel with missing descriptions.
This is inpsired by a similar patch by Laurent that introduced checks
for LVDS panels - this extends the checks to the reminaing type of
connectors.
This is known to fail for some of the existing panels but added
despite this as we need help from people using the panels to
add the missing info.
The checks are not complete but will catch the most common mistakes.
The checks at the same time serves as documentation for the minimum
required description for a panel.
Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
---
This is my attempt on the validation described in the previous mail.
The assignment of default connector_type will then be a follow-up patch
to this.
Sam
drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 2aff93accad5..025a7ccdfcb3 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -549,8 +549,12 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
panel_simple_parse_panel_timing_node(dev, panel, &dt);
}
- if (desc->connector_type == DRM_MODE_CONNECTOR_LVDS) {
- /* Catch common mistakes for LVDS panels. */
+ /* Catch common mistakes for panels. */
+ switch (desc->connector_type) {
+ case 0:
+ WARN(desc->connector_type == 0, "specify missing
connector_type\n");
+ break;
+ case DRM_MODE_CONNECTOR_LVDS:
WARN_ON(desc->bus_flags &
~(DRM_BUS_FLAG_DE_LOW |
DRM_BUS_FLAG_DE_HIGH |
@@ -564,6 +568,30 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
WARN_ON((desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ||
desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA)
&&
desc->bpc != 8);
+ break;
+ case DRM_MODE_CONNECTOR_eDP:
+ WARN_ON(desc->bus_format == 0);
+ WARN_ON(desc->bpc != 6 && desc->bpc != 8);
+ break;
+ case DRM_MODE_CONNECTOR_DSI:
+ WARN_ON(desc->bpc != 6 && desc->bpc != 8);
+ break;
+ case DRM_MODE_CONNECTOR_DPI:
+ WARN_ON(desc->bus_flags &
+ ~(DRM_BUS_FLAG_DE_LOW |
+ DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+ DRM_BUS_FLAG_DATA_MSB_TO_LSB |
+ DRM_BUS_FLAG_DATA_LSB_TO_MSB |
+ DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE |
+ DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE));
+ WARN_ON(desc->bus_format == 0);
+ WARN_ON(desc->bpc != 6 && desc->bpc != 8);
+ break;
+ default:
+ WARN(true, "panel has unknown connector_type: %d\n",
desc->connector_type);
+ break;
}
drm_panel_init(&panel->base, dev, &panel_simple_funcs,
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
