Add support for Powertip PH800480T013 800x480 parallel LCD, this one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <[email protected]> To: [email protected] Cc: Eric Anholt <[email protected]> Cc: Rob Herring <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: [email protected] --- drivers/gpu/drm/panel/panel-simple.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index af6ea5480c81..6bf6604ca78e 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2986,6 +2986,27 @@ static const struct panel_desc pda_91_00156_a0 = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, }; +static const struct drm_display_mode powertip_ph800480t013_idf02_mode = { + .clock = 24750, + .hdisplay = 800, + .hsync_start = 800 + 54, + .hsync_end = 800 + 54 + 2, + .htotal = 800 + 54 + 2 + 44, + .vdisplay = 480, + .vsync_start = 480 + 49, + .vsync_end = 480 + 49 + 2, + .vtotal = 480 + 49 + 2 + 22, +}; + +static const struct panel_desc powertip_ph800480t013_idf02 = { + .modes = &powertip_ph800480t013_idf02_mode, + .num_modes = 1, + .size = { + .width = 152, + .height = 91, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, +}; static const struct drm_display_mode qd43003c0_40_mode = { .clock = 9000, @@ -3998,6 +4019,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "pda,91-00156-a0", .data = &pda_91_00156_a0, + }, { + .compatible = "powertip,ph800480t013-idf02", + .data = &powertip_ph800480t013_idf02, }, { .compatible = "qiaodian,qd43003c0-40", .data = &qd43003c0_40, -- 2.27.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
