On Fri, 2020-09-04 at 14:53 +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> DP 1.3 adds some extra control knobs for DP->HDMI protocol conversion.
> Let's use that to configure the "HDMI mode" (ie. infoframes vs. not)
> based on the capabilities of the sink.
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 23 +++++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_dp.h | 1 +
> 3 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 28ff85493f25..9adba0d0b4aa 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3470,6 +3470,7 @@ static void hsw_ddi_pre_enable_dp(struct
> intel_atomic_state *state,
> intel_ddi_init_dp_buf_reg(encoder);
> if (!is_mst)
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
> + intel_dp_configure_protocol_converter(intel_dp);
> intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
> true);
> intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index a703e4659e47..047449253a54 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3792,6 +3792,28 @@ static void intel_dp_enable_port(struct intel_dp
> *intel_dp,
> intel_de_posting_read(dev_priv, intel_dp->output_reg);
> }
>
> +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp)
> +{
> + struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> + u8 tmp;
> +
> + if (intel_dp->dpcd[DP_DPCD_REV] < 0x13)
> + return;
> +
> + if (!drm_dp_is_branch(intel_dp->dpcd))
> + return;
> +
> + tmp = intel_dp->has_hdmi_sink ?
> + DP_HDMI_DVI_OUTPUT_CONFIG : 0;
> +
> + if (drm_dp_dpcd_writeb(&intel_dp->aux,
> + DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) <= 0)
> + drm_dbg_kms(&i915->drm, "Failed to set protocol converter HDMI
> mode to %s\n",
> + enableddisabled(intel_dp->has_hdmi_sink));
> +
> + /* TODO: configure YCbCr 4:2:2/4:2:0 conversion */
> +}
Maybe add a DP helper for this while we're at it? Up to you
> +
> static void intel_enable_dp(struct intel_atomic_state *state,
> struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config,
> @@ -3829,6 +3851,7 @@ static void intel_enable_dp(struct intel_atomic_state
> *state,
> }
>
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
> + intel_dp_configure_protocol_converter(intel_dp);
> intel_dp_start_link_train(intel_dp);
> intel_dp_stop_link_train(intel_dp);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h
> b/drivers/gpu/drm/i915/display/intel_dp.h
> index ec5688a21f66..08a1c0aa8b94 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -51,6 +51,7 @@ int intel_dp_get_link_train_fallback_values(struct
> intel_dp *intel_dp,
> int intel_dp_retrain_link(struct intel_encoder *encoder,
> struct drm_modeset_acquire_ctx *ctx);
> void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
> +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp);
> void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
> const struct intel_crtc_state
> *crtc_state,
> bool enable);
--
Cheers,
Lyude Paul (she/her)
Software Engineer at Red Hat
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
