Hi Neil,
Thanks for your review. Is a device tree binding document like this one enough?
Entries for kmb-drm are similar to this.
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/gpu/brcm%2Cbcm-v3d.txt
How do I submit it once I have it ready?
Thanks,
Anitha
> -----Original Message-----
> From: Neil Armstrong <narmstr...@baylibre.com>
> Sent: Thursday, September 10, 2020 2:33 AM
> To: Chrisanthus, Anitha <anitha.chrisant...@intel.com>; dri-
> de...@lists.freedesktop.org; Paauwe, Bob J <bob.j.paa...@intel.com>;
> Dea, Edmund J <edmund.j....@intel.com>
> Cc: Vetter, Daniel <daniel.vet...@intel.com>
> Subject: Re: [PATCH v7 2/4] drm/kmb: Add support for KeemBay Display
>
> On 31/08/2020 22:02, Anitha Chrisanthus wrote:
> > This is a basic KMS atomic modesetting display driver for KeemBay family
> of
> > SOCs. Driver has no 2D or 3D graphics.It calls into the ADV bridge
> > driver at the connector level.
> >
> > Single CRTC with LCD controller->mipi DSI-> ADV bridge
> >
> > Only 1080p resolution and single plane is supported at this time.
> >
> > v2: moved extern to .h, removed license text
> > use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam)
> >
> > v3: Squashed all 59 commits to one
> >
> > v4: review changes from Sam Ravnborg
> > renamed dev_p to kmb
> > moved clocks under kmb_clock, consolidated clk initializations
> > use drmm functions
> > use DRM_GEM_CMA_DRIVER_OPS_VMAP
> >
> > v5: corrected spellings
> > v6: corrected checkpatch warnings
> > v7: review changes Sam Ravnborg and Thomas Zimmerman
> > removed kmb_crtc.h kmb_crtc_cleanup (Thomas)
> > renamed mode_set, kmb_load, inlined unload (Thomas)
> > moved remaining logging to drm_*(Thomas)
> > re-orged driver initialization (Thomas)
> > moved plane_status to drm_private (Sam)
> > removed unnecessary logs and defines and ifdef codes (Sam)
> > call helper_check in plane_atomic_check (Sam)
> > renamed set to get for bpp and format functions(Sam)
> > use drm helper functions for reset, duplicate/destroy state instead
> > of kmb functions (Sam)
> > removed kmb_priv from kmb_plane and removed kmb_plane_state
> (Sam)
> >
> > Cc: Sam Ravnborg <s...@ravnborg.org>
> > Signed-off-by: Anitha Chrisanthus <anitha.chrisant...@intel.com>
> > Reviewed-by: Bob Paauwe <bob.j.paa...@intel.com>
> > ---
> > drivers/gpu/drm/kmb/kmb_crtc.c | 224 +++++++++++++
> > drivers/gpu/drm/kmb/kmb_drv.c | 676
> ++++++++++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/kmb/kmb_drv.h | 170 ++++++++++
> > drivers/gpu/drm/kmb/kmb_plane.c | 480
> ++++++++++++++++++++++++++++
> > drivers/gpu/drm/kmb/kmb_plane.h | 110 +++++++
> > 5 files changed, 1660 insertions(+)
> > create mode 100644 drivers/gpu/drm/kmb/kmb_crtc.c
> > create mode 100644 drivers/gpu/drm/kmb/kmb_drv.c
> > create mode 100644 drivers/gpu/drm/kmb/kmb_drv.h
> > create mode 100644 drivers/gpu/drm/kmb/kmb_plane.c
> > create mode 100644 drivers/gpu/drm/kmb/kmb_plane.h
> >
>
> [...]
>
> > +
> > +static const struct of_device_id kmb_of_match[] = {
> > + {.compatible = "intel,kmb_display"},
> > + {},
> > +};
>
> As I already commented on v1, a proper YAML bindings files
> is mandatory here, to check if the bindings are correct and if
> the drivers uses them correctly (port/endpoints, etc..)
>
> Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
