Hi Lyude,

> On Oct 8, 2020, at 05:53, Lyude Paul <ly...@redhat.com> wrote:
> 
> Hi! I thought this patch rang a bell, we actually already had some discussion
> about this since there's a couple of other systems this was causing issues 
> for.
> Unfortunately it never seems like that patch got sent out. Satadru?
> 
> (if I don't hear back from them soon, I'll just send out a patch for this
> myself)
> 
> JFYI - the proper fix here is to just drop the
> DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP check from the code entirely. As long 
> as
> the backlight supports AUX_SET_CAP, that should be enough for us to control 
> it.

Does the proper fix include dropping DP_QUIRK_FORCE_DPCD_BACKLIGHT entirely?

Kai-Heng

> 
> 
> On Wed, 2020-10-07 at 14:58 +0800, Kai-Heng Feng wrote:
>> HP DreamColor panel needs to be controlled via AUX interface. However,
>> it has both DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP and
>> DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP set, so it fails to pass
>> intel_dp_aux_display_control_capable() test.
>> 
>> Skip the test if the panel has force DPCD quirk.
>> 
>> Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com>
>> ---
>> drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
>> b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
>> index acbd7eb66cbe..acf2e1c65290 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
>> @@ -347,9 +347,13 @@ int intel_dp_aux_init_backlight_funcs(struct
>> intel_connector *intel_connector)
>>      struct intel_panel *panel = &intel_connector->panel;
>>      struct intel_dp *intel_dp = enc_to_intel_dp(intel_connector->encoder);
>>      struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>> +    bool force_dpcd;
>> +
>> +    force_dpcd = drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
>> +                                  DP_QUIRK_FORCE_DPCD_BACKLIGHT);
>> 
>>      if (i915->params.enable_dpcd_backlight == 0 ||
>> -        !intel_dp_aux_display_control_capable(intel_connector))
>> +        (!force_dpcd &&
>> !intel_dp_aux_display_control_capable(intel_connector)))
>>              return -ENODEV;
>> 
>>      /*
>> @@ -358,9 +362,7 @@ int intel_dp_aux_init_backlight_funcs(struct
>> intel_connector *intel_connector)
>>       */
>>      if (i915->vbt.backlight.type !=
>>          INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
>> -        i915->params.enable_dpcd_backlight != 1 &&
>> -        !drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
>> -                          DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
>> +        i915->params.enable_dpcd_backlight != 1 && !force_dpcd) {
>>              drm_info(&i915->drm,
>>                       "Panel advertises DPCD backlight support, but "
>>                       "VBT disagrees. If your backlight controls "
> -- 
> Sincerely,
>      Lyude Paul (she/her)
>      Software Engineer at Red Hat

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to