> -----Original Message-----
> From: Anshuman Gupta <anshuman.gu...@intel.com>
> Sent: Friday, October 23, 2020 5:51 PM
> To: intel-...@lists.freedesktop.org; dri-devel@lists.freedesktop.org
> Cc: seanp...@chromium.org; Nikula, Jani <jani.nik...@intel.com>; C,
> Ramalingam <ramalinga...@intel.com>; Li, Juston <juston...@intel.com>;
> Shankar, Uma <uma.shan...@intel.com>; Gupta, Anshuman
> <anshuman.gu...@intel.com>
> Subject: [PATCH v3 07/16] drm/i915/hdcp: Enable Gen12 HDCP 1.4 DP MST
> support
> 
> Enable HDCP 1.4 over DP MST for Gen12.
> This also enable the stream encryption support for older generations, which 
> was
> missing earlier.
> 
> v2:
> - Added debug print for stream encryption.
> - Disable the hdcp on port after disabling last stream
>   encryption.

Don't see port disable here, Am I missing something.

> 
> Cc: Ramalingam C <ramalinga...@intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gu...@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 10 ++---
>  drivers/gpu/drm/i915/display/intel_hdcp.c   | 46 ++++++++++++++-------
>  2 files changed, 35 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 16865b200062..f00e12fc83e8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -826,13 +826,9 @@ static struct drm_connector
> *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
>       intel_attach_force_audio_property(connector);
>       intel_attach_broadcast_rgb_property(connector);
> 
> -
> -     /* TODO: Figure out how to make HDCP work on GEN12+ */
> -     if (INTEL_GEN(dev_priv) < 12) {
> -             ret = intel_dp_init_hdcp(dig_port, intel_connector);
> -             if (ret)
> -                     DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
> -     }
> +     ret = intel_dp_init_hdcp(dig_port, intel_connector);
> +     if (ret)
> +             drm_dbg_kms(&dev_priv->drm, "HDCP init failed, skipping.\n");
> 
>       /*
>        * Reuse the prop from the SST connector because we're diff --git
> a/drivers/gpu/drm/i915/display/intel_hdcp.c
> b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index 61252d4be3dd..46c9bd588db1 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -612,7 +612,12 @@ int intel_hdcp_auth_downstream(struct intel_connector
> *connector)
>       return ret;
>  }
> 
> -/* Implements Part 1 of the HDCP authorization procedure */
> +/*
> + * Implements Part 1 of the HDCP authorization procedure.
> + * Authentication Part 1 steps for Multi-stream DisplayPort.
> + * Step 1. Auth Part 1 sequence on the driving MST Trasport Link.
> + * Step 2. Enable encryption for each stream that requires encryption.
> + */
>  static int intel_hdcp_auth(struct intel_connector *connector)  {
>       struct intel_digital_port *dig_port = 
> intel_attached_dig_port(connector);
> @@ -766,10 +771,16 @@ static int intel_hdcp_auth(struct intel_connector
> *connector)
>               return -ETIMEDOUT;
>       }
> 
> -     /*
> -      * XXX: If we have MST-connected devices, we need to enable encryption
> -      * on those as well.
> -      */
> +     /* DP MST Auth Part 1 Step 2.a and Step 2.b */
> +     if (shim->stream_encryption) {
> +             ret = shim->stream_encryption(dig_port, true);
> +             if (ret) {
> +                     drm_err(&dev_priv->drm, "Failed to enable HDCP 1.4
> stream enc\n");
> +                     return ret;
> +             }
> +             drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 tras %s stream
> encrypted\n",
> +                         transcoder_name(hdcp->stream_transcoder));
> +     }
> 
>       if (repeater_present)
>               return intel_hdcp_auth_downstream(connector);
> @@ -790,19 +801,26 @@ static int _intel_hdcp_disable(struct intel_connector
> *connector)
> 
>       drm_dbg_kms(&dev_priv->drm, "[%s:%d] HDCP is being disabled...\n",
>                   connector->base.name, connector->base.base.id);
> +     /*
> +      * Step 1: Deselect HDCP Multiplestream Bit.
> +      * Step 2: poll for stream encryption status to be disable.
> +      */

The above comment should be inside the callback, doesn't add value here.

> +     if (hdcp->shim->stream_encryption) {
> +             ret = hdcp->shim->stream_encryption(dig_port, false);
> +             if (ret) {
> +                     drm_err(&dev_priv->drm, "Failed to disable HDCP 1.4
> stream enc\n");
> +                     return ret;
> +             }
> +             drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 trans %s stream
> encryption disabled\n",
> +                         transcoder_name(hdcp->stream_transcoder));
> +     }
> 
>       /*
> -      * If there are other connectors on this port using HDCP, don't disable
> -      * it. Instead, toggle the HDCP signalling off on that particular
> -      * connector/pipe and exit.
> +      * If there are other connectors on this port using HDCP, don't disable 
> it.
> +      * Repeat steps 1-2 for each stream that no longer requires encryption.
>        */
> -     if (dig_port->num_hdcp_streams > 0) {
> -             ret = hdcp->shim->toggle_signalling(dig_port,
> -                                                 cpu_transcoder, false);
> -             if (ret)
> -                     DRM_ERROR("Failed to disable HDCP signalling\n");
> +     if (dig_port->num_hdcp_streams > 0)
>               return ret;
> -     }
> 
>       hdcp->hdcp_encrypted = false;
>       intel_de_write(dev_priv, HDCP_CONF(dev_priv, cpu_transcoder, port), 0);
> --
> 2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to