Hi Vinay,
Thank you for the patch.
I'm afraid I've had close to no time for DRM bridge maintenance over the
past few months, and I don't expect the situation to improve soon. I
know how painful it can be to keep pinging without receiving any reply.
I'm sorry about that, we have a shortage of maintainers for this part of
the subsystem and it seems difficult to recruit.
On Thu, Oct 22, 2020 at 12:15:47PM +0530, Vinay Simha BN wrote:
> - atomic_check removed
> - video data input and output formats added
> - bus formats read from drm_bridge_state.output_bus_cfg.format
> and .atomic_get_input_bus_fmts() instead of connector
>
> Signed-off-by: Vinay Simha BN <simha...@gmail.com>
>
> ---
> v1:
> * Laurent Pinchart review comments incorporated
> drm_bridge_state.output_bus_cfg.format
> instead of connector
> v2:
> * Laurent Pinchart review comments incorporated
> atomic_check removed
> video data input and output formats added
> ---
> drivers/gpu/drm/bridge/tc358775.c | 75
> ++++++++++++++++++++++++++++++---------
> 1 file changed, 58 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358775.c
> b/drivers/gpu/drm/bridge/tc358775.c
> index 2272adc..cc27570 100644
> --- a/drivers/gpu/drm/bridge/tc358775.c
> +++ b/drivers/gpu/drm/bridge/tc358775.c
> @@ -271,6 +271,20 @@ struct tc_data {
> struct gpio_desc *stby_gpio;
> u8 lvds_link; /* single-link or dual-link */
> u8 bpc;
> + u32 output_bus_fmt;
> +};
> +
> +static const u32 tc_lvds_in_bus_fmts[] = {
> + MEDIA_BUS_FMT_RGB565_1X16,
> + MEDIA_BUS_FMT_RGB666_1X18,
> + MEDIA_BUS_FMT_RGB666_1X24_CPADHI,
> + MEDIA_BUS_FMT_RBG888_1X24,
> +};
> +
> +static const u32 tc_lvds_out_bus_fmts[] = {
> + MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
> + MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> + MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
> };
>
> static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
> @@ -359,19 +373,6 @@ static void d2l_write(struct i2c_client *i2c, u16 addr,
> u32 val)
> ret, addr);
> }
>
> -/* helper function to access bus_formats */
> -static struct drm_connector *get_connector(struct drm_encoder *encoder)
> -{
> - struct drm_device *dev = encoder->dev;
> - struct drm_connector *connector;
> -
> - list_for_each_entry(connector, &dev->mode_config.connector_list, head)
> - if (connector->encoder == encoder)
> - return connector;
> -
> - return NULL;
> -}
> -
> static void tc_bridge_enable(struct drm_bridge *bridge)
> {
> struct tc_data *tc = bridge_to_tc(bridge);
> @@ -380,7 +381,10 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
> u32 val = 0;
> u16 dsiclk, clkdiv, byteclk, t1, t2, t3, vsdelay;
> struct drm_display_mode *mode;
> - struct drm_connector *connector = get_connector(bridge->encoder);
> + struct drm_bridge_state *state =
> + drm_priv_to_bridge_state(bridge->base.state);
> +
> + tc->output_bus_fmt = state->output_bus_cfg.format;
>
> mode = &bridge->encoder->crtc->state->adjusted_mode;
>
> @@ -451,14 +455,13 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
> d2l_write(tc->i2c, LVPHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_ND(6));
>
> dev_dbg(tc->dev, "bus_formats %04x bpc %d\n",
> - connector->display_info.bus_formats[0],
> + tc->output_bus_fmt,
> tc->bpc);
> /*
> * Default hardware register settings of tc358775 configured
> * with MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA jeida-24 format
> */
> - if (connector->display_info.bus_formats[0] ==
> - MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) {
> + if (tc->output_bus_fmt == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG) {
As output_bus_fmt is only used in this function, I would make this a
local variable and drop the output_bus_fmt field from tc_data. You could
even use state->output_bus_cfg.format directly in the two locations
where the value is needed without a local variable, up to you.
> /* VESA-24 */
> d2l_write(tc->i2c, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2,
> LVI_R3));
> d2l_write(tc->i2c, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5,
> LVI_G0));
> @@ -590,6 +593,40 @@ static int tc358775_parse_dt(struct device_node *np,
> struct tc_data *tc)
> return 0;
> }
>
> +static u32 *
> +tc_bridge_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + u32 *input_fmts = NULL;
> + u8 i;
You can make this an unsigned int, a u8 won't save space of CPU time.
> +
> + *num_input_fmts = 0;
> +
> + for (i = 0 ; i < ARRAY_SIZE(tc_lvds_out_bus_fmts) ; ++i) {
> + if (output_fmt == tc_lvds_out_bus_fmts[i])
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(tc_lvds_out_bus_fmts))
> + return NULL;
> +
> + *num_input_fmts = ARRAY_SIZE(tc_lvds_in_bus_fmts);
> +
> + input_fmts = kcalloc(*num_input_fmts, ARRAY_SIZE(tc_lvds_in_bus_fmts),
> + GFP_KERNEL);
> + if (!input_fmts)
> + return NULL;
> +
> + for (i = 0; i < ARRAY_SIZE(tc_lvds_in_bus_fmts); ++i)
> + input_fmts[i] = tc_lvds_in_bus_fmts[i];
This could be written
memcpy(input_fmts, tc_lvds_in_bus_fmts, sizeof(input_fmts));
With those small changes,
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> +
> + return input_fmts;
> +}
> +
> static int tc_bridge_attach(struct drm_bridge *bridge,
> enum drm_bridge_attach_flags flags)
> {
> @@ -639,6 +676,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
> }
>
> static const struct drm_bridge_funcs tc_bridge_funcs = {
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> + .atomic_get_input_bus_fmts = tc_bridge_get_input_bus_fmts,
> .attach = tc_bridge_attach,
> .pre_enable = tc_bridge_pre_enable,
> .enable = tc_bridge_enable,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
