On 02/22, Daniel Vetter wrote:
> On Sat, Feb 20, 2021 at 11:42:12AM -0300, Melissa Wen wrote:
> > Add support to overlay plane, in addition to primary and cursor
> > planes. In this approach, the plane composition still requires an
> > active primary plane and planes are composed associatively in the
> > order: (primary <- overlay) <- cursor
> >
> > It enables to run the following IGT tests successfully:
> > - kms_plane_cursor:
> > - pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
> > - kms_atomic:
> > - plane-overlay-legacy
> > and preserves the successful execution of kms_cursor_crc,
> > kms_writeback and kms_flip
> >
> > Signed-off-by: Melissa Wen <melissa....@gmail.com>
> > ---
> > drivers/gpu/drm/vkms/vkms_composer.c | 27 +++++++++++++++++----------
> > drivers/gpu/drm/vkms/vkms_drv.c | 5 +++++
> > drivers/gpu/drm/vkms/vkms_drv.h | 1 +
> > drivers/gpu/drm/vkms/vkms_output.c | 17 +++++++++++++++--
> > drivers/gpu/drm/vkms/vkms_plane.c | 20 +++++++++++++++-----
> > 5 files changed, 53 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_composer.c
> > b/drivers/gpu/drm/vkms/vkms_composer.c
> > index be8f1d33c645..2116da9b5a43 100644
> > --- a/drivers/gpu/drm/vkms/vkms_composer.c
> > +++ b/drivers/gpu/drm/vkms/vkms_composer.c
> > @@ -144,11 +144,12 @@ static void compose_planes(struct vkms_composer
> > *primary_composer,
> >
> > static int composite(void **vaddr_out,
> > struct vkms_composer *primary_composer,
> > - struct vkms_composer *cursor_composer)
> > + struct vkms_crtc_state *crtc_state)
> > {
> > struct drm_framebuffer *fb = &primary_composer->fb;
> > struct drm_gem_object *gem_obj = drm_gem_fb_get_obj(fb, 0);
> > struct drm_gem_shmem_object *shmem_obj = to_drm_gem_shmem_obj(gem_obj);
> > + int i;
> >
> > if (!*vaddr_out) {
> > *vaddr_out = kzalloc(shmem_obj->base.size, GFP_KERNEL);
> > @@ -163,8 +164,14 @@ static int composite(void **vaddr_out,
> >
> > memcpy(*vaddr_out, shmem_obj->vaddr, shmem_obj->base.size);
> >
> > - if (cursor_composer)
> > - compose_planes(primary_composer, cursor_composer, *vaddr_out);
> > + /* If there are other planes besides primary, we consider the active
> > + * planes should be in z-order and compose them associatively:
> > + * ((primary <- overlay) <- cursor)
> > + */
> > + for (i = 1; i < crtc_state->num_active_planes; i++)
> > + compose_planes(primary_composer,
> > + crtc_state->active_planes[i]->composer,
> > + *vaddr_out);
> >
> > return 0;
> > }
> > @@ -186,7 +193,7 @@ void vkms_composer_worker(struct work_struct *work)
> > struct drm_crtc *crtc = crtc_state->base.crtc;
> > struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
> > struct vkms_composer *primary_composer = NULL;
> > - struct vkms_composer *cursor_composer = NULL;
> > + struct vkms_plane_state *act_plane = NULL;
> > bool crc_pending, wb_pending;
> > void *vaddr_out = NULL;
> > u32 crc32 = 0;
> > @@ -210,11 +217,11 @@ void vkms_composer_worker(struct work_struct *work)
> > if (!crc_pending)
> > return;
> >
> > - if (crtc_state->num_active_planes >= 1)
> > - primary_composer = crtc_state->active_planes[0]->composer;
> > -
> > - if (crtc_state->num_active_planes == 2)
> > - cursor_composer = crtc_state->active_planes[1]->composer;
> > + if (crtc_state->num_active_planes >= 1) {
> > + act_plane = crtc_state->active_planes[0];
> > + if (act_plane->base.plane->type == DRM_PLANE_TYPE_PRIMARY)
> > + primary_composer = act_plane->composer;
> > + }
> >
> > if (!primary_composer)
> > return;
> > @@ -222,7 +229,7 @@ void vkms_composer_worker(struct work_struct *work)
> > if (wb_pending)
> > vaddr_out = crtc_state->active_writeback;
> >
> > - ret = composite(&vaddr_out, primary_composer, cursor_composer);
> > + ret = composite(&vaddr_out, primary_composer, crtc_state);
> > if (ret) {
> > if (ret == -EINVAL && !wb_pending)
> > kfree(vaddr_out);
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c
> > b/drivers/gpu/drm/vkms/vkms_drv.c
> > index 2173b82606f6..027ffe759440 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > @@ -44,6 +44,10 @@ static bool enable_writeback = true;
> > module_param_named(enable_writeback, enable_writeback, bool, 0444);
> > MODULE_PARM_DESC(enable_writeback, "Enable/Disable writeback connector
> > support");
> >
> > +static bool enable_overlay;
> > +module_param_named(enable_overlay, enable_overlay, bool, 0444);
> > +MODULE_PARM_DESC(enable_overlay, "Enable/Disable overlay support");
> > +
> > DEFINE_DRM_GEM_FOPS(vkms_driver_fops);
> >
> > static void vkms_release(struct drm_device *dev)
> > @@ -198,6 +202,7 @@ static int __init vkms_init(void)
> >
> > config->cursor = enable_cursor;
> > config->writeback = enable_writeback;
> > + config->overlay = enable_overlay;
> >
> > return vkms_create(config);
> > }
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h
> > b/drivers/gpu/drm/vkms/vkms_drv.h
> > index 9ad5ad8b7737..784219da8df0 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -85,6 +85,7 @@ struct vkms_device;
> > struct vkms_config {
> > bool writeback;
> > bool cursor;
> > + bool overlay;
> > /* only set when instantiated */
> > struct vkms_device *dev;
> > };
> > diff --git a/drivers/gpu/drm/vkms/vkms_output.c
> > b/drivers/gpu/drm/vkms/vkms_output.c
> > index 05d3bb45e6c1..c60d0f2e7a37 100644
> > --- a/drivers/gpu/drm/vkms/vkms_output.c
> > +++ b/drivers/gpu/drm/vkms/vkms_output.c
> > @@ -39,7 +39,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > struct drm_connector *connector = &output->connector;
> > struct drm_encoder *encoder = &output->encoder;
> > struct drm_crtc *crtc = &output->crtc;
> > - struct drm_plane *primary, *cursor = NULL;
> > + struct drm_plane *primary, *cursor = NULL, *overlay = NULL;
> > int ret;
> > int writeback;
> >
> > @@ -51,6 +51,16 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > if (ret)
> > goto err_crtc;
> >
> > + if (vkmsdev->config->overlay) {
> > + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY,
> > index);
> > + if (IS_ERR(overlay)) {
> > + ret = PTR_ERR(overlay);
> > + goto err_overlay;
> > + }
> > + if (overlay && !overlay->possible_crtcs)
> > + overlay->possible_crtcs = drm_crtc_mask(crtc);
> > + }
> > +
> > if (vkmsdev->config->cursor) {
> > cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> > if (IS_ERR(cursor)) {
> > @@ -58,7 +68,6 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > goto err_cursor;
> > }
> > }
> > -
> > crtc->cursor = cursor;
> > if (cursor && !cursor->possible_crtcs)
> > cursor->possible_crtcs = drm_crtc_mask(crtc);
> > @@ -108,6 +117,10 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > if (vkmsdev->config->cursor)
> > drm_plane_cleanup(cursor);
> >
> > +err_overlay:
> > + if (vkmsdev->config->overlay)
> > + drm_plane_cleanup(overlay);
>
> Using drmm_universal_plane_init would be nice so we can ditch a bunch of
> this cleanup code, but can be done later. Same for crtc.
Hmm.. I'll check it. Just to be sure, would it be drmm_universal_plane_alloc?
>
> > +
> > err_crtc:
> > drm_plane_cleanup(primary);
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c
> > b/drivers/gpu/drm/vkms/vkms_plane.c
> > index 0824327cc860..8e7bb84bc894 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -19,6 +19,11 @@ static const u32 vkms_cursor_formats[] = {
> > DRM_FORMAT_ARGB8888,
> > };
> >
> > +static const u32 vkms_overlay_formats[] = {
> > + DRM_FORMAT_ARGB8888,
> > + DRM_FORMAT_XRGB8888,
>
> Does the blend function correctly work for XRGB, i.e. ignore the alpha
> channel? Maybe even split that functionality out into a separate patch
> (and then also add it for the cursor plane, so we keep one unified format
> list for non-primary planes) so it sticks out more.
>
Initially, I was also reusing the cursor formart, because ARGB makes
more sense to me. But I checked that IGT considers a XRGB overlay, that
is why I included both. I verified in tests using XRGB that the color is
received as a full-opaque RGB: [FF-RR-GG-BB] and the alpha_blending
function composes these two types correctly. If this is the regular
behavior for XRGB, I think I can unify cursor and overlay formats in the
previous patch that generalize some cursor variables for reusing.
>
> > +};
> > +
> > static struct drm_plane_state *
> > vkms_plane_duplicate_state(struct drm_plane *plane)
> > {
> > @@ -127,7 +132,7 @@ static int vkms_plane_atomic_check(struct drm_plane
> > *plane,
> > if (IS_ERR(crtc_state))
> > return PTR_ERR(crtc_state);
> >
> > - if (plane->type == DRM_PLANE_TYPE_CURSOR)
> > + if (plane->type != DRM_PLANE_TYPE_PRIMARY)
> > can_position = true;
> >
> > ret = drm_atomic_helper_check_plane_state(state, crtc_state,
> > @@ -195,14 +200,19 @@ struct drm_plane *vkms_plane_init(struct vkms_device
> > *vkmsdev,
> > int ret, nformats;
> >
> > plane = kzalloc(sizeof(*plane), GFP_KERNEL);
> > - if (!plane)
> > - return ERR_PTR(-ENOMEM);
> >
> > - if (type == DRM_PLANE_TYPE_CURSOR) {
> > + switch (type) {
> > + case DRM_PLANE_TYPE_CURSOR:
> > formats = vkms_cursor_formats;
> > nformats = ARRAY_SIZE(vkms_cursor_formats);
> > funcs = &vkms_primary_helper_funcs;
> > - } else {
> > + break;
> > + case DRM_PLANE_TYPE_OVERLAY:
> > + formats = vkms_overlay_formats;
> > + nformats = ARRAY_SIZE(vkms_overlay_formats);
> > + funcs = &vkms_primary_helper_funcs;
> > + break;
> > + default:
> > formats = vkms_formats;
> > nformats = ARRAY_SIZE(vkms_formats);
> > funcs = &vkms_primary_helper_funcs;
>
> Tbf my brain is somewhat toast today, but aside from the few questions I
> think this looks like a solid approach.
Thanks for review. I'll address the improvements you pointed out here
and send a new version.
Melissa
>
> Cheers, Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
