From: YoungJun Cho <yj44....@samsung.com>
This patch fixes G2D core malfunctioning issue once g2d dma is started.
Without 'DMA_HOLD_CMD_REG' register setting, there is only one interrupt
after the execution to all command lists have been completed. And that
induces watchdog. So this patch sets 'LIST_HOLD' command to the register
so that command execution interrupt can be occured whenever each command
list execution is finished.
Changelog v2:
- Consider for interrupt setup to each command list and all command lists
And correct typo.
Signed-off-by: YoungJun Cho <yj44....@samsung.com>
Signed-off-by: Inki Dae <inki....@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_g2d.c | 20 +++++++++++++++-----
1 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index 095520f..1ff1144 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -82,7 +82,7 @@
#define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */
-#define G2D_USET_HOLD (1 << 2)
+#define G2D_USER_HOLD (1 << 2)
#define G2D_LIST_HOLD (1 << 1)
#define G2D_BITBLT_HOLD (1 << 0)
@@ -592,10 +592,6 @@ static void g2d_dma_start(struct g2d_data *g2d,
pm_runtime_get_sync(g2d->dev);
clk_enable(g2d->gate_clk);
- /* interrupt enable */
- writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF,
- g2d->regs + G2D_INTEN);
-
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
@@ -863,9 +859,23 @@ int exynos_g2d_set_cmdlist_ioctl(struct drm_device
*drm_dev, void *data,
cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
cmdlist->data[cmdlist->last++] = 0;
+ /*
+ * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
+ * and GCF bit should be set to INTEN register if user wants
+ * G2D interrupt event once current command list execution is
+ * finished.
+ * Otherwise only ACF bit should be set to INTEN register so
+ * that one interrupt is occured after all command lists
+ * have been completed.
+ */
if (node->event) {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
+ } else {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
}
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */
--
1.7.4.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
