On 7/4/21 11:38 AM, Jagan Teki wrote:
24-bit SPWG, JEIDA bus formats are considered as 24-bit
bus widths for LCDC_CTRL register in mxsfb.
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
---
drivers/gpu/drm/mxsfb/mxsfb_kms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
index 22cb749fc9bc..5657155f9633 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
@@ -85,6 +85,8 @@ static void mxsfb_set_formats(struct mxsfb_drm_private *mxsfb,
ctrl |= CTRL_BUS_WIDTH_18;
break;
case MEDIA_BUS_FMT_RGB888_1X24:
+ case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+ case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
On MX8MM/MN, the bus between LCDIF and DSIM is plain parallel bus, so
this patch is wrong.
You want to pick
drm: mxsfb: Use bus_format from the nearest bridge if present
and then implement .atomic_get_input_bus_fmts on all your bridges. And
only then you will get the correct MEDIA_BUS_FMT_RGB888_1X24 here.
