PATCH V5 2021-10-05 14:28:44: - dropped mode_fixup and timings support in dw-hdmi as it is no longer needed in this V5 (by [email protected]) - dropped "drm/ingenic: add some jz4780 specific features" (stimulated by [email protected]) - fixed typo in commit subject: "synopsis" -> "synopsys" (by [email protected]) - swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by [email protected]) - improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml and made dependent of bridge/synopsys,dw-hdmi.yaml (based on suggestions by [email protected]) - fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by [email protected]) - dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a no longer needed workaround for a previous version (suggested by [email protected])
PATCH V4 2021-09-27 18:44:38: - fix setting output_port = 1 (issue found by [email protected]) - ci20.dts: convert to use hdmi-connector (by [email protected]) - add a hdmi-regulator to control +5V power (by [email protected]) - added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on plugin event detection (by [email protected]) - always allocate extended descriptor but initialize only for jz4780 (by [email protected]) - updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various improvements v3" (by [email protected]) - rebased to v5.13-rc3 PATCH V3 2021-08-08 07:10:50: This series adds HDMI support for JZ4780 and CI20 board (and fixes one IPU related issue in registration error path) - [patch 1/8] switched from mode_fixup to atomic_check (suggested by [email protected]) - the call to the dw-hdmi specialization is still called mode_fixup - [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by [email protected]) - factor out some non-HDMI features of the jz4780 into a separate patch - multiple fixes around max height - do not change regmap config but a copy on stack - define some constants - factor out fixing of drm_init error path for IPU into separate patch - use FIELD_PREP() - [patch 8/8] conversion to component framework dropped (suggested by [email protected] and [email protected]) PATCH V2 2021-08-05 16:08:05: This series adds HDMI support for JZ4780 and CI20 board V2: - code and commit messages revisited for checkpatch warnings - rebased on v5.14-rc4 - include (failed, hence RFC 8/8) attempt to convert to component framework (was suggested by Paul Cercueil <[email protected]> a while ago) H. Nikolaus Schaller (1): MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780 Paul Boddie (5): drm/ingenic: Fix drm_init error path if IPU was registered drm/ingenic: Add support for JZ4780 and HDMI output drm/ingenic: Add dw-hdmi driver for jz4780 MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers MIPS: DTS: CI20: Add DT nodes for HDMI setup Sam Ravnborg (1): dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema .../bindings/display/ingenic-jz4780-hdmi.yaml | 79 +++++++++++ arch/mips/boot/dts/ingenic/ci20.dts | 67 ++++++++++ arch/mips/boot/dts/ingenic/jz4780.dtsi | 45 +++++++ arch/mips/configs/ci20_defconfig | 6 + drivers/gpu/drm/ingenic/Kconfig | 9 ++ drivers/gpu/drm/ingenic/Makefile | 1 + drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 96 +++++++++++++- drivers/gpu/drm/ingenic/ingenic-drm.h | 42 ++++++ drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 125 ++++++++++++++++++ 9 files changed, 464 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c -- 2.33.0
