On 10/17/21 6:49 PM, Sam Ravnborg wrote:
[...]
+ /*
+ * Encoder might sample data on different clock edge than the display,
+ * for example OnSemi FIN3385 has a dedicated strapping pin to select
+ * the sampling edge.
+ */
+ if (lvds_codec->connector_type == DRM_MODE_CONNECTOR_LVDS &&
+ !of_property_read_u32(dev->of_node, "pclk-sample", &val)) {
+ lvds_codec->timings.input_bus_flags = val ?
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE :
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
+ }
+
/*
* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
* to look up.
*/
lvds_codec->bridge.of_node = dev->of_node;
+ lvds_codec->bridge.timings = &lvds_codec->timings;
I do not understand how this will work. The only field that is set is
timings.input_bus_flags
but any user will see bridge.timings is set and will think this is all
timing info.
Maybe I just misses something obvious?
Is there anything else in those timings that should be set ? See
include/drm/drm_bridge.h around line 640
setup_time_ps/hold_time_ps/dual_link isn't supported by this driver, so
it is 0 or false anyway, i.e. no change.
