From: tommy-huang <tommy_hu...@aspeedtech.com>
Add more reset and clock select code for AST2600.
The gfx_flags parameter was added for chip caps idenified.
Signed-off-by: tommy-huang <tommy_hu...@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 16 +++++++-
drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 16 ++++++++
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 50 ++++++++++++++++++++++--
3 files changed, 77 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h
b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 4e6a442c3886..2c733225d3c7 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -8,7 +8,8 @@ struct aspeed_gfx {
struct drm_device drm;
void __iomem *base;
struct clk *clk;
- struct reset_control *rst;
+ struct reset_control *rst_crt;
+ struct reset_control *rst_engine;
struct regmap *scu;
u32 dac_reg;
@@ -16,6 +17,7 @@ struct aspeed_gfx {
u32 vga_scratch_reg;
u32 throd_val;
u32 scan_line_max;
+ u32 flags;
struct drm_simple_display_pipe pipe;
struct drm_connector connector;
@@ -106,3 +108,15 @@ int aspeed_gfx_create_output(struct drm_device *drm);
/* CRT_THROD */
#define CRT_THROD_LOW(x) (x)
#define CRT_THROD_HIGH(x) ((x) << 8)
+
+/* SCU control */
+#define SCU_G6_CLK_COURCE 0x300
+
+/* GFX FLAGS */
+#define RESET_MASK BIT(0)
+#define RESET_G6 BIT(0)
+#define CLK_MASK BIT(4)
+#define CLK_G6 BIT(4)
+
+#define G6_CLK_MASK (BIT(8) | BIT(9) | BIT(10))
+#define G6_USB_40_CLK BIT(9)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index 827e62c1daba..e0975ecda92d 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -77,6 +77,18 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx
*priv)
regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
}
+static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
+{
+ switch (priv->flags & CLK_MASK) {
+ case CLK_G6:
+ regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK,
0x0);
+ regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK,
G6_USB_40_CLK);
+ break;
+ default:
+ break;
+ }
+}
+
static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
{
struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
@@ -87,6 +99,8 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx
*priv)
if (err)
return;
+ aspeed_gfx_set_clk(priv);
+
#if 0
/* TODO: we have only been able to test with the 40MHz USB clock. The
* clock is fixed, so we cannot adjust it here. */
@@ -193,6 +207,7 @@ static void aspeed_gfx_pipe_update(struct
drm_simple_display_pipe *pipe,
static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
+
u32 reg = readl(priv->base + CRT_CTRL1);
/* Clear pending VBLANK IRQ */
@@ -207,6 +222,7 @@ static int aspeed_gfx_enable_vblank(struct
drm_simple_display_pipe *pipe)
static void aspeed_gfx_disable_vblank(struct drm_simple_display_pipe *pipe)
{
struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
+
u32 reg = readl(priv->base + CRT_CTRL1);
reg &= ~CRT_CTRL_VERTICAL_INTR_EN;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d10246b1d1c2..59a0de92650f 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -64,6 +64,7 @@ struct aspeed_gfx_config {
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
+ u32 gfx_flags; /* Flags for gfx chip caps */
};
static const struct aspeed_gfx_config ast2400_config = {
@@ -72,6 +73,7 @@ static const struct aspeed_gfx_config ast2400_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
+ .gfx_flags = 0,
};
static const struct aspeed_gfx_config ast2500_config = {
@@ -80,6 +82,7 @@ static const struct aspeed_gfx_config ast2500_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
+ .gfx_flags = 0,
};
static const struct aspeed_gfx_config ast2600_config = {
@@ -88,6 +91,7 @@ static const struct aspeed_gfx_config ast2600_config = {
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
.scan_line_max = 128,
+ .gfx_flags = RESET_G6 | CLK_G6,
};
static const struct of_device_id aspeed_gfx_match[] = {
@@ -138,6 +142,44 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void
*data)
return IRQ_NONE;
}
+static int aspeed_gfx_reset(struct drm_device *drm)
+{
+ struct platform_device *pdev = to_platform_device(drm->dev);
+ struct aspeed_gfx *priv = to_aspeed_gfx(drm);
+
+ switch (priv->flags & RESET_MASK) {
+ case RESET_G6:
+ priv->rst_crt = devm_reset_control_get(&pdev->dev, "crt");
+ if (IS_ERR(priv->rst_crt)) {
+ dev_err(&pdev->dev,
+ "missing or invalid crt reset controller device
tree entry");
+ return PTR_ERR(priv->rst_crt);
+ }
+ reset_control_deassert(priv->rst_crt);
+
+ priv->rst_engine = devm_reset_control_get(&pdev->dev, "engine");
+ if (IS_ERR(priv->rst_engine)) {
+ dev_err(&pdev->dev,
+ "missing or invalid engine reset controller
device tree entry");
+ return PTR_ERR(priv->rst_engine);
+ }
+ reset_control_deassert(priv->rst_engine);
+ break;
+
+ default:
+ priv->rst_crt = devm_reset_control_get_exclusive(&pdev->dev,
NULL);
+ if (IS_ERR(priv->rst_crt)) {
+ dev_err(&pdev->dev,
+ "missing or invalid reset controller device
tree entry");
+ return PTR_ERR(priv->rst_crt);
+ }
+ reset_control_deassert(priv->rst_crt);
+ break;
+ }
+
+ return 0;
+}
+
static int aspeed_gfx_load(struct drm_device *drm)
{
struct platform_device *pdev = to_platform_device(drm->dev);
@@ -163,6 +205,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
+ priv->flags = config->gfx_flags;
priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
if (IS_ERR(priv->scu)) {
@@ -186,13 +229,12 @@ static int aspeed_gfx_load(struct drm_device *drm)
return ret;
}
- priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
- if (IS_ERR(priv->rst)) {
+ ret = aspeed_gfx_reset(drm);
+ if (ret) {
dev_err(&pdev->dev,
"missing or invalid reset controller device tree
entry");
- return PTR_ERR(priv->rst);
+ return ret;
}
- reset_control_deassert(priv->rst);
priv->clk = devm_clk_get(drm->dev, NULL);
if (IS_ERR(priv->clk)) {
--
2.17.1
