Den 27.01.2022 11.04, skrev Maxime Ripard:
> On Tue, Jan 25, 2022 at 06:57:00PM +0100, Noralf Trønnes wrote:
>> Add a driver that will work with most MIPI DBI compatible SPI panels.
>> This avoids adding a driver for every new MIPI DBI compatible controller
>> that is to be used by Linux. The 'compatible' Device Tree property with
>> a '.bin' suffix will be used to load a firmware file that contains the
>> controller configuration.
>>
>> Example (driver will load sainsmart18.bin):
>>
>> display@0 {
>> compatible = "sainsmart18", "panel-mipi-dbi-spi";
>> reg = <0>;
>> reset-gpios = <&gpio 25 0>;
>> dc-gpios = <&gpio 24 0>;
>> };
>>
>> v2:
>> - Drop model property and use compatible instead (Rob)
>> - Add wiki entry in MAINTAINERS
>>
>> Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
>> ---
>> MAINTAINERS | 8 +
>> drivers/gpu/drm/panel/Kconfig | 11 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-mipi-dbi.c | 394 +++++++++++++++++++++++++
>> 4 files changed, 414 insertions(+)
>> create mode 100644 drivers/gpu/drm/panel/panel-mipi-dbi.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d03ad8da1f36..8baa98723bdc 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -6047,6 +6047,14 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
>> F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
>> F: drivers/gpu/drm/tiny/mi0283qt.c
>>
>> +DRM DRIVER FOR MIPI DBI compatible panels
>> +M: Noralf Trønnes <nor...@tronnes.org>
>> +S: Maintained
>> +W: https://github.com/notro/panel-mipi-dbi/wiki
>> +T: git git://anongit.freedesktop.org/drm/drm-misc
>> +F: Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
>> +F: drivers/gpu/drm/panel/panel-mipi-dbi.c
>> +
>> DRM DRIVER FOR MSM ADRENO GPU
>> M: Rob Clark <robdcl...@gmail.com>
>> M: Sean Paul <s...@poorly.run>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 434c2861bb40..1851cda5f877 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -274,6 +274,17 @@ config DRM_PANEL_LG_LG4573
>> Say Y here if you want to enable support for LG4573 RGB panel.
>> To compile this driver as a module, choose M here.
>>
>> +config DRM_PANEL_MIPI_DBI
>> + tristate "MIPI DBI compatible panel"
>> + depends on SPI
>> + depends on BACKLIGHT_CLASS_DEVICE
>> + depends on DRM_KMS_HELPER
>> + select DRM_KMS_CMA_HELPER
>> + select DRM_MIPI_DBI
>> + help
>> + Say Y here if you want to enable support for MIPI DBI compatible
>> panels.
>> + To compile this driver as a module, choose M here.
>> +
>> config DRM_PANEL_NEC_NL8048HL11
>> tristate "NEC NL8048HL11 RGB panel"
>> depends on GPIOLIB && OF && SPI
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index d99fbbce49d1..a90c30459964 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -25,6 +25,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) +=
>> panel-leadtek-ltk050h3146w.o
>> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
>> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
>> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
>> +obj-$(CONFIG_DRM_PANEL_MIPI_DBI) += panel-mipi-dbi.o
>> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
>> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
>> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
>> diff --git a/drivers/gpu/drm/panel/panel-mipi-dbi.c
>> b/drivers/gpu/drm/panel/panel-mipi-dbi.c
>> new file mode 100644
>> index 000000000000..6e3dc2de21d2
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-mipi-dbi.c
>> @@ -0,0 +1,394 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * DRM driver for MIPI DBI compatible display panels
>> + *
>> + * Copyright 2022 Noralf Trønnes
>> + */
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/delay.h>
>> +#include <linux/firmware.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/property.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/spi/spi.h>
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_drv.h>
>> +#include <drm/drm_fb_helper.h>
>> +#include <drm/drm_gem_atomic_helper.h>
>> +#include <drm/drm_gem_cma_helper.h>
>> +#include <drm/drm_managed.h>
>> +#include <drm/drm_mipi_dbi.h>
>> +#include <drm/drm_modeset_helper.h>
>> +#include <video/mipi_display.h>
>> +
>> +static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D',
>> 'B', 'I',
>> + 0, 0, 0, 0, 0, 0, 0 };
>> +
>> +/*
>> + * The display panel configuration is stored in a firmware file. The Device
>> Tree 'compatible'
>> + * property value with a '.bin' suffix is passed to request_firmware() to
>> fetch this file.
>> + */
>> +struct panel_mipi_dbi_config {
>> + /* Magic string: panel_mipi_dbi_magic */
>> + u8 magic[15];
>> +
>> + /* Config file format version */
>> + u8 file_format_version;
>> +
>> + /* Width in pixels */
>> + __be16 width;
>> + /* Height in pixels */
>> + __be16 height;
>> +
>> + /* Width in millimeters (optional) */
>> + __be16 width_mm;
>> + /* Height in millimeters (optional) */
>> + __be16 height_mm;
>> +
>> + /* X-axis panel offset */
>> + __be16 x_offset;
>> + /* Y-axis panel offset */
>> + __be16 y_offset;
>> +
>> + /* 4 pad bytes, must be zero */
>> + u8 pad[4];
>> +
>> + /*
>> + * Optional MIPI commands to execute when the display pipeline is
>> enabled.
>> + * This can be used to configure the display controller.
>> + *
>> + * The commands are stored in a byte array with the format:
>> + * command, num_parameters, [ parameter, ...], command, ...
>> + *
>> + * Some commands require a pause before the next command can be
>> received.
>> + * Inserting a delay in the command sequence is done by using the NOP
>> command with one
>> + * parameter: delay in miliseconds (the No Operation command is part of
>> the MIPI Display
>> + * Command Set where it has no parameters).
>> + *
>> + * Example:
>> + * command 0x11
>> + * sleep 120ms
>> + * command 0xb1 parameters 0x01, 0x2c, 0x2d
>> + * command 0x29
>> + *
>> + * Byte sequence:
>> + * 0x11 0x00
>> + * 0x00 0x01 0x78
>> + * 0xb1 0x03 0x01 0x2c 0x2d
>> + * 0x29 0x00
>> + */
>> + u8 commands[];
>> +};
>
> I'm not really a fan of parsing raw data in the kernel. I guess we can't
> really avoid the introduction of a special case to sleep, but we already
> have dt properties for all of the other properties (but X and Y offset,
> maybe?)
>
> Maybe we should use those instead?
>
I don't understand your reluctance to parsing data, lots of ioctls do
it. And this data can only be loaded by root. What I like about having
these properties in the config file is that the binding becomes a
fallback binding that can actually be made to work without changing the
Device Tree.
For arguments sake let's say tiny/st7735r.c was not built and we had
this node:
display@0{
compatible = "jianda,jd-t18003-t01", "sitronix,st7735r",
"panel-mipi-dbi-spi";
};
It will still be possible to use this display without changing the
Device Tree. Just add a firmware/config file.
Having the properties in DT it would have to look like this for the
fallback to work:
display@0{
compatible = "jianda,jd-t18003-t01", "sitronix,st7735r",
"panel-mipi-dbi-spi";
panel-timing = {
hactive = <128>;
vactive = <128>;
};
width-mm = <25>;
height-mm = <26>;
x-offset = <2>;
y-offset = <3>;
};
Is this important, I'm not sure. What do you think?
The users I care most about have DT overlays so for them it doesn't
matter much where the properties are.
Noralf.
