Hi Christoph, Thank you for the patch.
On Tue, Feb 01, 2022 at 12:07:17PM +0100, Christoph Niedermaier wrote: > Without the data-mapping devicetree property my display won't > work properly. It is flickering, because the bus flags won't > be assigned without a defined bus format by the imx parallel > display driver. There was a discussion about the removal [1] > and an agreement that a better solution is needed, but it is > missing so far. So what would be the better approach? > > [1] https://patchwork.freedesktop.org/patch/357659/?series=74705&rev=1 > > This reverts commit d021d751c14752a0266865700f6f212fab40a18c. > > Signed-off-by: Christoph Niedermaier <[email protected]> > Cc: Marek Vasut <[email protected]> > Cc: Sam Ravnborg <[email protected]> > Cc: Laurent Pinchart <[email protected]> > Cc: Maxime Ripard <[email protected]> > Cc: Philipp Zabel <[email protected]> > Cc: David Airlie <[email protected]> > Cc: Daniel Vetter <[email protected]> > Cc: Shawn Guo <[email protected]> > Cc: Sascha Hauer <[email protected]> > Cc: Pengutronix Kernel Team <[email protected]> > Cc: Fabio Estevam <[email protected]> > Cc: NXP Linux Team <[email protected]> > Cc: [email protected] > To: [email protected] > --- > drivers/gpu/drm/panel/panel-simple.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c > index 3c08f9827acf..2c683d94a3f3 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -453,6 +453,7 @@ static int panel_dpi_probe(struct device *dev, > struct panel_desc *desc; > unsigned int bus_flags; > struct videomode vm; > + const char *mapping; > int ret; > > np = dev->of_node; > @@ -477,6 +478,16 @@ static int panel_dpi_probe(struct device *dev, > of_property_read_u32(np, "width-mm", &desc->size.width); > of_property_read_u32(np, "height-mm", &desc->size.height); > > + of_property_read_string(np, "data-mapping", &mapping); > + if (!strcmp(mapping, "rgb24")) > + desc->bus_format = MEDIA_BUS_FMT_RGB888_1X24; > + else if (!strcmp(mapping, "rgb565")) > + desc->bus_format = MEDIA_BUS_FMT_RGB565_1X16; > + else if (!strcmp(mapping, "bgr666")) > + desc->bus_format = MEDIA_BUS_FMT_RGB666_1X18; > + else if (!strcmp(mapping, "lvds666")) > + desc->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI; You're right that there's an issue, but a revert isn't the right option. The commit you're reverting never made it in a stable release, because it was deemed to not be a good enough option. First of all, any attempt to fix this should include an update to the DT binding. Second, as this is about DPI panels, the LVDS option should be dropped. Finally, I've shared some initial thoughts in [1], maybe you can reply to that e-mail to continue the discussion there ? https://lore.kernel.org/all/[email protected]/ > + > /* Extract bus_flags from display_timing */ > bus_flags = 0; > vm.flags = timing->flags; -- Regards, Laurent Pinchart
