On 3/16/2022 9:45 AM, Sankeerth Billakanti (QUIC) wrote:
Subject: Re: [RFC PATCH v2 4/5] drm/msm/dp: replace dp_connector with
drm_bridge_connector
Date: Wed, 23 Feb 2022 16:40:56 -0800
From: Kuogee Hsieh <[email protected]>
To: Stephen Boyd <[email protected]>, Dmitry Baryshkov
<[email protected]>
CC: Abhinav Kumar <[email protected]>, Bjorn Andersson
<[email protected]>, Rob Clark <[email protected]>, Sean Paul
<[email protected]>, David Airlie <[email protected]>, Daniel Vetter
<[email protected]>, [email protected], dri-
[email protected], [email protected]
On 2/23/2022 1:33 PM, Stephen Boyd wrote:
Quoting Kuogee Hsieh (2022-02-23 10:27:26)
On 2/23/2022 10:22 AM, Dmitry Baryshkov wrote:
On 23/02/2022 20:21, Kuogee Hsieh wrote:
In the panel device node.
Can you please share it too?
&soc {
edp_power_supply: edp_power {
compatible = "regulator-fixed";
regulator-name = "edp_backlight_power";
regulator-always-on;
regulator-boot-on;
};
edp_backlight: edp_backlight {
compatible = "pwm-backlight";
pwms = <&pm8350c_pwm 3 65535>;
power-supply = <&edp_power_supply>;
enable-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&backlight_pwm_default>;
};
edp_panel: edp_panel {
compatible = "sharp_lq140m1jw46";
Is that supposed to be sharp,lq140m1jw46 with a comma instead of an
underscore?
Stephen,
This is our internal branch which does not have patches up to date yet.
I will cherry-pick newer edp related patches which are under review now to
re test it.
Tested-by: Sankeerth Billakanti <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Detect returned eDP not connected because the panel power was not on and
mode_valid was failing because the DP mode_valid is different from eDP
