On Wed, May 11, 2022 at 9:17 PM Marek Vasut <ma...@denx.de> wrote: > > On 5/11/22 16:58, Marek Szyprowski wrote: > > Hi Dave, > > > > On 05.04.2022 13:43, Dave Stevenson wrote: > >> On Fri, 18 Mar 2022 at 12:25, Dave Stevenson > >> <dave.steven...@raspberrypi.com> wrote: > >>> On Fri, 4 Mar 2022 at 15:18, Dave Stevenson > >>> <dave.steven...@raspberrypi.com> wrote: > >>>> Hi All > >>> A gentle ping on this series. Any comments on the approach? > >>> Thanks. > >> I realise the merge window has just closed and therefore folks have > >> been busy, but no responses on this after a month? > >> > >> Do I give up and submit a patch to document that DSI is broken and no one > >> cares? > > > > Thanks for pointing this patchset in the 'drm: bridge: Add Samsung MIPI > > DSIM bridge' thread, otherwise I would miss it since I'm not involved > > much in the DRM development. > > > > This resolves most of the issues in the Exynos DSI and its recent > > conversion to the drm bridge framework. I've added the needed > > prepare_upstream_first flags to the panels and everything works fine > > without the bridge chain order hacks. > > > > Feel free to add: > > > > Tested-by: Marek Szyprowski <m.szyprow...@samsung.com> > > > > > > The only remaining thing to resolve is the moment of enabling DSI host. > > The proper sequence is: > > > > 1. host power on, 2. device power on, 3. host init, 4. device init, 5. > > video enable. > > +CC Raphael, STM32MP1 has similar topic. > > > #1 is done in dsi's pre_enable, #2 is done in panel's prepare. #3 was so > > far done in the first host transfer call, which usually happens in > > panel's prepare, then the #4 happens. Then video enable is done in the > > enable callbacks. > > > > Jagan wants to move it to the dsi host pre_enable() to let it work with > > DSI bridges controlled over different interfaces > > (https://lore.kernel.org/all/20220504114021.33265-6-ja...@amarulasolutions.com/ > > ). This however fails on Exynos with DSI panels, because when dsi's > > pre_enable is called, the dsi device is not yet powered. I've discussed > > this with Andrzej Hajda and we came to the conclusion that this can be > > resolved by adding the init() callback to the struct mipi_dsi_host_ops. > > Then DSI client (next bridge or panel) would call it after powering self > > on, but before sending any DSI commands in its pre_enable/prepare functions. > > > > I've prepared a prototype of such solution. This approach finally > > resolved all the initialization issues! The bridge chain finally matches > > the hardware, no hack are needed, and everything is controlled by the > > DRM core. This prototype also includes the Jagan's patches, which add > > IMX support to Samsung DSIM. If one is interested, here is my git repo > > with all the PoC patches: > > > > https://github.com/mszyprow/linux/tree/v5.18-next-20220511-dsi-rework > > Can you CC me on the iMX DSIM discussion/patches ? It seems I was left > out of it all, even though I work with the iMX8M DRM stuff extensively.
Sorry, this is not intentional. I added you and many others in RFC and subsequently, I have added in the next versions whoever responds to the previous. I will do it in the next version DSIM. Thanks, Jagan.
