The ICN6211 is capable of swapping the output DPI RGB/BGR color channels,
document a DT property to select this swap in DT. This can be useful on
hardware where such swap happens.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Jagan Teki <ja...@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Rob Herring <r...@kernel.org>
Cc: Robert Foss <robert.f...@linaro.org>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Cc: devicet...@vger.kernel.org
---
.../devicetree/bindings/display/bridge/chipone,icn6211.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git
a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 18563ebed1a96..e721dd76e6640 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -33,6 +33,12 @@ properties:
Optional external clock connected to REF_CLK input.
The clock rate must be in 10..154 MHz range.
+ blue-and-red-swap:
+ description:
+ If defined, the DPI output blue and red channels are swapped,
+ i.e. RGB becomes BGR.
+ type: boolean
+
enable-gpios:
description: Bridge EN pin, chip is reset when EN is low.
--
2.35.1
